<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: verdana,helvetica,sans-serif; font-size: 10pt; color: #000000'><br>Thanks everyone. <br><br>Since the Poll Status option is not enabled on the gateways in question, I won't be able to use this. I was not able to get consistent results with changing the parameter and not resetting the gateway. <br><br>Gonna have to try simply shutting it down and potentiality losing a call or two. Will have to see.<br><br>Lelio<br><br><br><div><span name="x"></span>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst, Network Infrastructure<br>Computing and Communications Services (CCS)<br>University of Guelph<br><br>519‐824‐4120 Ext 56354<br>lelio@uoguelph.ca<br>www.uoguelph.ca/ccs<br>Room 037, Animal Science and Nutrition Building<br>Guelph, Ontario, N1G 2W1<span name="x"></span><br></div><br><hr id="zwchr"><div style="color:#000;font-weight:normal;font-style:normal;text-decoration:none;font-family:Helvetica,Arial,sans-serif;font-size:12pt;"><b>From: </b>"Adam Pawlowski" <ajp26@buffalo.edu><br><b>To: </b>cisco-voip@puck.nether.net<br><b>Sent: </b>Tuesday, February 3, 2015 12:06:13 PM<br><b>Subject: </b>Re: [cisco-voip] easiest and quickest way to disable a PRI<br><br>Last time I busied out bearer channels, I was not able to restore them to service without reloading the gateway, which was not ideal given I didn't want to bring everything down, but it was graceful. <br><br>You could take it out of your route lists for outbound and shut it down after-hours, and just chance losing a call somewhere in there.<br><br>I also had luck changing the ISDN switch type on our emulated 5ESS to national which causes it to work for a while and eventually drop D and stop working which had the desired effect too. That is a bad idea and not recommended.<br><br><br><br>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br>https://puck.nether.net/mailman/listinfo/cisco-voip<br></div><br></div></body></html>