<div dir="ltr"><div><div><div>I am getting ready to add a VWIC3 T1 (and PRI) to my 2900 series ISR router running 15.3(2) and I'm trying to configure an IOS transcoder, I have PVDM3-64 (2 32 modules). When I get into the transcode sub configuration it gives me an "Unrecognised Command" error when trying to preference the codecs. What I am doing wrong?<br><br>router(config)#dspfarm profile 6 transcode <br>router(config-dspfarm-profile)#codec ?<br>% Unrecognized command<br>router(config-dspfarm-profile)#codec <br><br></div>I've been reading that I may need to actually have the T1 card in the router first but I can't find anything to confirm that. I've been reading here: <a href="http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cminterop/configuration/15-mt/dia-15-mt-book/vc-enh-confr-vgr.html#GUID-2E7DACC4-090A-4E89-BC1B-006E79BF0BC0">http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cminterop/configuration/15-mt/dia-15-mt-book/vc-enh-confr-vgr.html#GUID-2E7DACC4-090A-4E89-BC1B-006E79BF0BC0</a> which seems to suggest that PVDM3 might not be able to support transcoding?<br><br></div>Can anyone shed a little light my way?<br><br></div>thank you<br></div>