<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>I should also add if you have a spare ATA190, swap it out and see if the issue stabilizes or continues on with the different device. If the issue persists with a different device, likely not the ATA.<br><br>If you don't have a spare 190, then try your 190 on a different cluster if you have one (I don't think the 190 is officially supported on any version of CME yet, but you could try that if you don't have another cluster).<br><br>Thanks,<br><br>Ryan <br><br><br><div><hr id="stopSpelling">From: ryanhuff@outlook.com<br>To: bertacco.alessandro@alice.it; cisco-voip@puck.nether.net<br>Date: Mon, 23 Mar 2015 09:19:36 -0400<br>Subject: Re: [cisco-voip] ATA190 Random De-Register from CUCM 10.5.2<br><br>
<style><!--
.ExternalClass .ecxhmmessage P {
padding:0px;
}
.ExternalClass body.ecxhmmessage {
font-size:12pt;
font-family:Calibri;
}
--></style>
<div dir="ltr">I've used the ATA190 and it's family of 18X pretty often. In the case of the SIP devices like the 190 or 187 I have always been able to use the default SIP Profile settings; of course I'm generally dealing with vanilla networks and CCM's built very closely to the SRND.<br><br>Here is where I would start (if you haven't already):<br><br>What do you have the <i>device security mode</i> set to? If you have it
set to Authenticated or Encrypted but it has not received a CTL file, the
phone will attempt registration up to four times to make a secure
connection.<br><br>Are the MAC addresses for <i>Phone 1</i> and <i>Phone 2</i> correct (<i>Phone 2</i> will usually loose the first two characters and append a 01 at the end of the device name). If you support auto registration, remove the devices and let them auto register and see if they stabilize.<br><br>Any layer 1/2 issues (change out the patch cable, check the connection into the switchport ... etc)? Do you see any interface drops on the switchport? Is the switchport full duplex 10/100 or 10/1000? Have you shut/no shut the port just to see if clearing the port helps?<br><br>Go through the IVR menu on the ATA itself and verify that it reports all the same settings that you CCM device configs show. <a href="http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/190/1_0/english/administration/guide/sip/ATA190/a190_agBcd.html" target="_blank">http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/190/1_0/english/administration/guide/sip/ATA190/a190_agBcd.html</a><br><br>Thanks,<br><br>Ryan <br><br><div><hr id="ecxstopSpelling">From: bertacco.alessandro@alice.it<br>To: cisco-voip@puck.nether.net<br>Date: Mon, 23 Mar 2015 11:28:44 +0100<br>Subject: [cisco-voip] ATA190 Random De-Register from CUCM 10.5.2<br><br><style><!--
.ExternalClass p.ecxMsoNormal, .ExternalClass li.ecxMsoNormal, .ExternalClass div.ecxMsoNormal {
font-size:11.0pt;
font-family:"Calibri",sans-serif;
}
.ExternalClass a:link, .ExternalClass span.ecxMsoHyperlink {
color:#0563C1;
text-decoration:underline;
}
.ExternalClass span.ecxMsoHyperlinkFollowed {
color:#954F72;
text-decoration:underline;
}
.ExternalClass span.ecxStileMessaggioDiPostaElettronica17 {
font-family:"Calibri",sans-serif;
color:windowtext;
}
.ExternalClass .ecxMsoChpDefault {
font-family:"Calibri",sans-serif;
}
.ExternalClass div.ecxWordSection1 {
}
--></style><div class="ecxWordSection1"><p class="ecxMsoNormal"><span lang="EN-GB">Hi Guys,</span></p><p class="ecxMsoNormal"><span lang="EN-GB"> ATA190 FW version 1.1.2.(005) with CUCM 10.5.2.10000-5, de-register randomly, and need to reboot the device to re-register again on the CUCM.</span></p><p class="ecxMsoNormal"><span lang="EN-GB"> </span></p><p class="ecxMsoNormal"><span lang="EN-GB">Anyone as the same issue? Do you use a special SIP Device profile changing some timings, or you are using standard SIP Device Profile?</span></p><p class="ecxMsoNormal"><span lang="EN-GB"> </span></p><p class="ecxMsoNormal"><span lang="EN-GB">Thank you all</span></p><p class="ecxMsoNormal"><span lang="EN-GB"> </span></p><p class="ecxMsoNormal"><span lang="EN-GB">Regards</span></p><p class="ecxMsoNormal"><span lang="EN-GB"> </span></p><p class="ecxMsoNormal"> </p><p class="ecxMsoNormal" style="background:white;"><span style="color:#1F497D;">Alessandro Bertacco</span><span style="font-size:12.0pt;font-family:"Times New Roman",serif;color:#222222;"></span></p><p class="ecxMsoNormal"><span lang="EN-GB"> </span></p></div><br>_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip</div> </div>
<br>_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip</div> </div></body>
</html>