<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<style type="text/css" style="display:none"><!-- p { margin-top: 0px; margin-bottom: 0px; }--></style>
</head>
<body dir="ltr" style="font-size:12pt;color:#000000;background-color:#FFFFFF;font-family:Calibri,Arial,Helvetica,sans-serif;">
<p>I think i have found the issue<br>
</p>
<p><br>
</p>
<p><a href="https://supportforums.cisco.com/discussion/12286521/vg350-sccp-ports-losing-dial-tone">https://supportforums.cisco.com/discussion/12286521/vg350-sccp-ports-losing-dial-tone</a> <br>
</p>
<p><br>
</p>
<p>Mind you I am running older code 15.1 but I think it is the same<br>
</p>
<p><br>
</p>
<p>Cheers<br>
</p>
<p><br>
</p>
<p><br>
</p>
<p>Leslie<br>
</p>
<p><br>
</p>
<div dir="ltr" style="font-size:12pt; color:#000000; background-color:#FFFFFF; font-family:Calibri,Arial,Helvetica,sans-serif">
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" color="#000000" style="font-size:11pt"><b>From:</b> cisco-voip <cisco-voip-bounces@puck.nether.net> on behalf of Leslie Meade <Leslie.Meade@lvs1.com><br>
<b>Sent:</b> Tuesday, March 31, 2015 4:45 AM<br>
<b>To:</b> cisco-voip (cisco-voip@puck.nether.net)<br>
<b>Subject:</b> [cisco-voip] VG350 analog ports</font>
<div> </div>
</div>
<div>
<p>Any one seen a problem where an analog phone gets battery/voltage but no ring tone. the phone will not work. However if you ring it everything works well. You are then able to lift the handset and get dial tone and make calls. Give the port X amount of time
and you loose dial tone again.<br>
</p>
<p><br>
</p>
<p>Cheers<br>
</p>
<p><br>
</p>
<p>Leslie<br>
</p>
</div>
</div>
</body>
</html>