<div dir="ltr">Not a security or a firewall guy so please bear with me.<div><br></div><div>We've opened up the ports as advised in this: <a href="http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Cisco-Expressway-IP-Port-Usage-for-Firewall-Traversal-Deployment_Guide-X8-1.pdf">http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Cisco-Expressway-IP-Port-Usage-for-Firewall-Traversal-Deployment_Guide-X8-1.pdf</a></div><div><br></div><div>Now, the weird part is that with a jabber client on the internet we get no RTP with this configuration.  Only when we open any to the Expressway-E do we get RTP, however we don't get signalling to the jabber client on the internet.  </div><div><br></div><div>Are there any other ports we should be opening?</div><div><br></div><div>I was under the impression that creating the UC Traversal zone opened up the logical channel between the C and the E so that everything outbound to the internet could get to the DMZ and out to the internet.  Am I misunderstanding?  Is there more configuration I need to piece together to make the solution whole?</div><div><br></div><div>Thanks in advance!</div></div>