<div dir="ltr">Hi Jose, I think you mighta hit the wrong mailing list :)<div><br></div><div>That said, what output are you trying to catch? on IOS 15.4T I'm getting some output with the debug ip ospf adj (below).</div><div><br></div><div><div><br></div><div><br></div><div><div>R1(config-if)#do sh debug</div><div><br></div><div>OSPF:</div><div> OSPF adjacency debugging is on</div></div></div><div><br></div><div><snip></div><div><br></div><div><div>R1(config-if)#no shut</div><div>R1(config-if)#^Z</div><div>R1#</div><div>*May 15 11:25:09.890: %SYS-5-CONFIG_I: Configured from console by console</div><div>R1#</div><div>*May 15 11:25:11.386: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up</div><div>*May 15 11:25:12.387: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed state to up</div><div>*May 15 11:25:12.387: OSPF-1 ADJ Et0/0: Route adjust notification: UP/UP</div><div>*May 15 11:25:12.387: OSPF-1 ADJ Et0/0: Interface going Up</div><div>*May 15 11:25:12.387: OSPF-1 ADJ Et0/0: Interface state change to UP, new ospf state WAIT</div><div>R1#</div><div>*May 15 11:25:14.616: OSPF-1 ADJ Et0/0: 2 Way Communication to 2.2.2.2, state 2WAY</div><div>*May 15 11:25:14.616: OSPF-1 ADJ Et0/0: Backup seen event before WAIT timer</div><div>*May 15 11:25:14.616: OSPF-1 ADJ Et0/0: DR/BDR election</div><div>*May 15 11:25:14.616: OSPF-1 ADJ Et0/0: Elect BDR 1.1.1.1</div><div>*May 15 11:25:14.616: OSPF-1 ADJ Et0/0: Elect DR 2.2.2.2</div><div>*May 15 11:25:14.616: OSPF-1 ADJ Et0/0: Elect BDR 1.1.1.1</div><div>*May 15 11:25:14.616: OSPF-1 ADJ Et0/0: Elect DR 2.2.2.2</div><div>*May 15 11:25:14.616: OSPF-1 ADJ Et0/0: DR: 2.2.2.2 (Id) BDR: 1.1.1.1 (Id)</div><div>*May 15 11:25:14.616: OSPF-1 ADJ Et0/0: Nbr <a href="http://2.2.2.2">2.2.2.2</a>: Prepare dbase exchange</div><div>*May 15 11:25:14.616: OSPF-1 ADJ Et0/0: Send DBD to 2.2.2.2 seq 0x9C9 opt 0x52 flag 0x7 len 32</div><div>*May 15 11:25:14.623: OSPF-1 ADJ Et0/0: Rcv DBD from 2.2.2.2 seq 0x1593 opt 0x52 flag 0x7 len 32 mtu 1500 state EXSTART</div><div>*May 15 11:25:14.623: OSPF-1 ADJ Et0/0: NBR Negotiation Done. We are the SLAVE</div><div>*May 15 11:25:14.623: OSPF-1 ADJ Et0/0: Nbr <a href="http://2.2.2.2">2.2.2.2</a>: Summary list built, size 1</div><div>*May 15 11:25:14.623: OSPF-1 ADJ Et0/0: Send DBD to 2.2.2.2 seq 0x1593 opt 0x52 flag 0x2 len 52</div><div>*May 15 11:25:14.624: OSPF-1 ADJ Et0/0: Rcv DBD from 2.2.2.2 seq 0x1594 opt 0x52 flag 0x1 len 72 mtu 1500 state EXCHANGE</div><div>*May 15 11:25:14.624: OSPF-1 ADJ Et0/0: Exchange Done with 2.2.2.2</div><div>*May 15 11:25:14.624: OSPF-1 ADJ Et0/0: Send LS REQ to 2.2.2.2 length 48 LSA count 2</div><div>*May 15 11:25:14.624: OSPF-1 ADJ Et0/0: Send DBD to 2.2.2.2 seq 0x1594 opt 0x52 flag 0x0 len 32</div><div>*May 15 11:25:14.625: OSPF-1 ADJ Et0/0: Rcv LS UPD from 2.2.2.2 length 104 LSA count 2</div><div>*May 15 11:25:14.625: OSPF-1 ADJ Et0/0: Synchronized with 2.2.2.2, state FULL</div><div>*May 15 11:25:14.625: %OSPF-5-ADJCHG: Process 1, Nbr 2.2.2.2 on Ethernet0/0 from LOADING to FULL, Loading Done</div><div>R1#</div><div>*May 15 11:25:14.625: OSPF-1 ADJ Et0/0: Rcv LS REQ from 2.2.2.2 length 36 LSA count 1</div><div>R1#</div><div>*May 15 11:25:24.243: OSPF-1 ADJ Et0/0: Neighbor change event</div><div>*May 15 11:25:24.243: OSPF-1 ADJ Et0/0: DR/BDR election</div><div>*May 15 11:25:24.243: OSPF-1 ADJ Et0/0: Elect BDR 1.1.1.1</div><div>*May 15 11:25:24.243: OSPF-1 ADJ Et0/0: Elect DR 2.2.2.2</div><div>*May 15 11:25:24.243: OSPF-1 ADJ Et0/0: DR: 2.2.2.2 (Id) BDR: 1.1.1.1 (Id)</div><div>R1#</div></div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Tue, May 12, 2015 at 9:00 AM, Jose Colon II <span dir="ltr"><<a href="mailto:jcolon424@gmail.com" target="_blank">jcolon424@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hey guys, I am running some OSPF labs and I notice that the following commands do not provide any output. <div><br></div><div>debus ip ospf adj</div><div><br></div><div>I do however get the desired output from "debug ip ospf events". Is this a change in software or is everyone teaching a command that is no longer used. I am using a Cisco 1921 and 2901 router as well as Cisco Packet Tracer and I still do not get any output from "debug ip ospf adj"</div><div><br></div><div>Thanks</div><span class="HOEnZb"><font color="#888888"><div>Jose</div></font></span></div>
<br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br><br clear="all"><div><br></div>-- <br><div class="gmail_signature">Ed Leatherman<br></div>
</div>