<div dir="ltr"><div><div><div><div><div><div>So I've had an MGCP/T1 gateway up and running with CCM, happy as a clam for several weeks. <br><br>Then all of the sudden today it stopped passing inbound communication. Egress works just fine, but ingress rings once then a fast busy.<br><br></div>In the ISDN logs I get "mandatory information element missing".<br><br></div>I am using; EF, BZ8S, Primary-ni (which is telco settings). Again everything WAS fine. After some research I found that error to mean that the CCM side kicked the call back to the gateway because it didn't get everything it needed in the header.<br><br></div>A proposed suggestion was to use a different switch-type. So in the CCM/Gateway/PRI config page, I changed the switch type to PRI-4ESS -> Saved/Applied/Reset (then restarted mgcp on the gateway) and presto, ingress is now working.<br><br></div><div>If I reverse the process and go back to the Primary-ni in the CCM/Gateway/PRI config, I get the same problem with ingress again.<br></div><div><br></div>Can anyone explain this to me? Does it sound like my telco changed something? Seems like something with MGCP is goofed right? Is this something that a telco would just arbitrarily change?<br><br></div>Thanks<br></div></div>