<div dir="ltr"><div>Everything looks good....</div><div><br></div><div><br></div><div>admin:utils ntp status</div><div>ntpd (pid 19674) is running...</div><div><br></div><div> remote refid st t when poll reach delay offset jitter</div><div>==============================================================================</div><div> 127.127.1.0 .LOCL. 10 l 21 64 377 0.000 0.000 0.001</div><div> 10.0.31.2 10.0.31.3 3 u 175 1024 377 0.635 -5.771 2.042</div><div>*10.0.31.3 129.6.15.29 2 u 970 1024 377 0.510 -11.340 0.449</div><div> 10.1.31.2 10.0.31.3 3 u 490 1024 377 0.850 -9.114 4.881</div><div>+10.1.31.3 129.6.15.29 2 u 184 1024 377 0.817 -4.085 5.355</div><div><br></div><div><br></div><div>synchronised to NTP server (10.0.31.3) at stratum 3 </div><div> time correct to within 68 ms</div><div> polling server every 1024 s</div><div><br></div><div>Current time in UTC is : Mon Nov 16 03:16:14 UTC 2015</div><div>Current time in America/Chicago is : Sun Nov 15 21:16:14 CST 2015</div><div>admin:</div><div><br></div><div>admin:utils diagnose module validate_network</div><div><br></div><div>Log file: platform/log/diag1.log</div><div><br></div><div>Starting diagnostic test(s)</div><div>===========================</div><div>test - validate_network : Passed </div><div><br></div><div>Diagnostics Completed</div><div><br></div><div>admin:#</div><div><br></div><div><div>admin:utils dbreplication runtimestate </div><div><br></div><div>DB and Replication Services: ALL RUNNING</div><div><br></div><div>Cluster Replication State: Replication repair command started at: 2014-06-20-23-22</div><div> Replication repair command COMPLETED 541 tables processed out of 541</div><div> Errors or Mismatches Were Found: </div><div><br></div><div> Use 'file view activelog cm/trace/dbl/sdi/ReplicationRepair.2014_06_20_23_22_51.out' to see the details</div><div><br></div><div>DB Version: ccm8_6_2_20000_2</div><div>Number of replicated tables: 541</div><div><br></div><div>Cluster Detailed View from PUB (5 Servers):</div><div><br></div><div> PING REPLICATION REPL. DBver& REPL. REPLICATION SETUP</div><div>SERVER-NAME IP ADDRESS (msec) RPC? STATUS QUEUE TABLES LOOP? (RTMT) & details </div><div>----------- ------------ ------ ---- ----------- ----- ------- ----- -----------------</div><div>IPTCMS02 10.0.126.12 0.196 Yes Connected 0 match Yes (2) Setup Completed</div><div>IPTCMS01 10.0.126.11 0.151 Yes Connected 0 match Yes (2) Setup Completed</div><div>IPTCMP 10.0.126.10 0.065 Yes Connected 0 match Yes (2) PUB Setup Completed</div><div>IPTCMS03 10.1.126.13 0.545 Yes Connected 0 match Yes (2) Setup Completed</div><div>IPTCMS04 10.1.126.14 0.527 Yes Connected 0 match Yes (2) Setup Completed</div><div> </div><div>admin:</div></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Sun, Nov 15, 2015 at 9:14 PM, Ryan Huff <span dir="ltr"><<a href="mailto:ryanhuff@outlook.com" target="_blank">ryanhuff@outlook.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="auto">
<div>Also worth noting that if CCM NTP is synchronized to a Windows server (even if it shows Stratum 3 or better); that is a problem you'll need to correct as SNTP can play hell with UCOS and do some pretty weird stuff.</div>
<div><br>
Thanks,</div>
<div><br>
</div>
<div>Ryan</div><div><div class="h5">
<div><br>
On Nov 15, 2015, at 10:06 PM, Ryan Huff <<a href="mailto:ryanhuff@outlook.com" target="_blank">ryanhuff@outlook.com</a>> wrote:<br>
<br>
</div>
<blockquote type="cite">
<div>
<div>If the FROM CCM version was unrestricted, it would say "<i>Unrestricted</i>" after the version number on the "<i>Active Master Version"</i> line. If it does not say "<i>Unrestricted</i>", then it is the more common restricted version.</div>
<div><br>
</div>
<div>As to your original issue, I would start with all the usual suspects. Is the FROM CCM cluster healthy to start with; dns, ntp, replication ... etc?</div>
<div><br>
</div>
<div>From CCM:</div>
<div><br>
</div>
<div>1.) #utils diagnose module validate_network</div>
<div> (Should see <i>Passed</i>)</div>
<div><br>
</div>
<div>2.) #utils ntp status</div>
<div> (Pub should be synchronized and Strata 3 or better)</div>
<div><br>
</div>
<div>3.) #utils dbreplication runtimestate<br>
(Should see <i>2 - Setup Completed</i> for all nodes)</div>
<div><br>
</div>
<div>If PCD is moving the apps to a new platform/chassis, make sure the
<i>target</i> environment can reach all the same network assets as the <i>from</i> environment.<br>
<br>
</div>
<div>Thanks,</div>
<div><br>
</div>
<div>Ryan</div>
<div><br>
On Nov 15, 2015, at 9:34 PM, Jonathan Charles <<a href="mailto:jonvoip@gmail.com" target="_blank">jonvoip@gmail.com</a>> wrote:<br>
<br>
</div>
<blockquote type="cite">
<div>
<div dir="ltr">It just says the version number...
<div><br>
</div>
<div>
<div>admin:show version active</div>
<div>Active Master Version: 8.6.2.20000-2</div>
<div>Active Version Installed Software Options: </div>
<div>cmterm-7942_7962-sccp.9-3-1ES27-rel.cop</div>
<div>cmterm-devicepack8.6.2.24118-1.cop</div>
<div>ciscocm.refresh_upgrade_v1.1.cop</div>
<div>ciscocm.ucmap_platformconfig.cop</div>
<div>ciscocm.migrate-export-v1.12.cop</div>
<div>admin:</div>
</div>
<div><br>
</div>
<div><br>
</div>
<div>Jonahan</div>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Sun, Nov 15, 2015 at 7:26 PM, Ryan Huff <span dir="ltr">
<<a href="mailto:ryanhuff@outlook.com" target="_blank">ryanhuff@outlook.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Did you actually dump the logs to a serial interface (curious what it shows)?<br>
<br>
On the FROM CCM, goto the CLI of pub (or sub) and do a "show version active"; it will tell you if you have the UNREST.<br>
<br>
Thanks,<br>
<br>
Ryan<br>
<span><br>
> On Nov 15, 2015, at 7:55 PM, Jonathan Charles <<a href="mailto:jonvoip@gmail.com" target="_blank">jonvoip@gmail.com</a>> wrote:<br>
><br>
> Using PCD on CUCM 10.5.2.11901 got the following error:<br>
><br>
</span>> <image.png><br>
<span>><br>
> It seems to imply I am not matching restricted vs. unrestricted...<br>
><br>
> Any easy way to find out?<br>
><br>
><br>
><br>
> Jonathan<br>
</span>> _______________________________________________<br>
> cisco-voip mailing list<br>
> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" rel="noreferrer" target="_blank">
https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote>
</div>
<br>
</div>
</div>
</blockquote>
</div>
</blockquote>
<blockquote type="cite">
<div><span>_______________________________________________</span><br>
<span>cisco-voip mailing list</span><br>
<span><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a></span><br>
<span><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a></span><br>
</div>
</blockquote>
</div></div></div>
</blockquote></div><br></div>