<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<style type="text/css" style="display:none;"><!-- P {margin-top:0;margin-bottom:0;} --></style>
</head>
<body dir="ltr">
<div id="divtagdefaultwrapper" style="font-size:12pt;color:#000000;background-color:#FFFFFF;font-family:Calibri,Arial,Helvetica,sans-serif;">
<p>I assume this is only with the Jabber clients and not IP phones as well?</p>
<p><br>
</p>
<p>The annunciation message you're getting from Call Manager is typically reserved for when the calling device does not have access to the called device (or pattern). If you're confident that you're CSS/Partitions are correct you may need to look at OS level
items.</p>
<p></p>
<p><br>
</p>
<p>I recently assisted someone who presented with similar symptoms; everything worked fine except Jabber client egress and the solution there was NTP (incorrect/unsupported NTP can cause very, very strange behavior in UCOS).</p>
<p><br>
</p>
<p>I would give the cluster a quick health check (performed from the CLI of the publisher);</p>
<p><br>
</p>
<ul>
<li>utils dbreplication runtimestate
<ul>
<li>Looking for everything to come back with a <em>(2) Setup Complete</em><em>di</em> message in the
<em>Replication Setup</em> column<br>
</li></ul>
</li></ul>
<ul>
<li>utils diagnose module validate_network
<ul>
<li>Looking for it to come back with <em>Passed </em>(anything fails like reverse DNS ... etc and it will explain)</li></ul>
</li></ul>
<ul>
<li>utils ntp status
<ul>
<li>Looking for it to show synchronized and a stratum 3 (or lower)
<ul>
<li>Windows servers (SNTP) are unsupported for NTP and may cause issues even if it shows synchronized</li></ul>
</li></ul>
</li></ul>
<ul>
<li>utils ntp server list
<ul>
<li>Looking for any ntp servers referenced by hostname/FQDN rather than IP address (you should reference ntp servers by IP address)</li></ul>
</li></ul>
<p>If everything comes back healthy, I would setup a test call scenario and pull traces off of CCM and follow the call flow. If one of the health checks fail, I would resolve that and then you may have to schedule a cluster restart (if possible).<br>
</p>
<p><br>
</p>
<div id="Signature">
<div id="divtagdefaultwrapper" style="font-size:12pt; color:#000000; background-color:#FFFFFF; font-family:Calibri,Arial,Helvetica,sans-serif">
= Ryan =
<p><br>
</p>
<p><br>
</p>
<p>Email: ryanthomashuff@outlook.com</p>
<p>Spark: ryanthomashuff@outlook.com</p>
<p>Twitter: <a id="LPNoLP" href="http://twitter.com/ryanthomashuff">@ryanthomashuff</a><br>
</p>
<p>LinkedIn: <a id="LPNoLP" href="http://linkedin.com/in/ryanthomashuff">ryanthomashuff</a><br>
</p>
<p>Web <a id="LPNoLP" href="http://ryanthomashuff.com">ryanthomashuff.com</a></p>
</div>
</div>
<br>
<br>
<div style="color: rgb(0, 0, 0);">
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="divRplyFwdMsg" dir="ltr"><font style="font-size:11pt" face="Calibri, sans-serif" color="#000000"><b>From:</b> cisco-voip <cisco-voip-bounces@puck.nether.net> on behalf of abbas wali <abbaseo@gmail.com><br>
<b>Sent:</b> Tuesday, November 24, 2015 9:58 AM<br>
<b>To:</b> cisco-voip@puck.nether.net<br>
<b>Subject:</b> [cisco-voip] Jabber phone mode outbound calls issue</font>
<div> </div>
</div>
<div>
<div style="">
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
Hi all,</p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
</p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
Jabber phone only mode (10.5.2) is unable to make any outbound calls including any internal calls even to reach the voicemail.
</p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
Inbound calls are working.</p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
</p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
This is happening in CUCM 9.1 </p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
</p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
When dial anything , I get the “your call cannt be completed as dialled please consult…”</p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
</p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
I have checked via the DNA and the line settings are okay and calls permitted. Hence the CSSs\DP are okay.
</p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
</p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
</p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
Strangely, we have another cluster CM 9.1 with the same jabber version and setting and it has no issues making any calls.
</p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
</p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
Any suggestions. </p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
</p>
<p style="margin: 0cm 0cm 0.0001pt; font-size: 11pt; font-family: "Calibri",sans-serif;">
Thanks </p>
</div>
</div>
</div>
</div>
</body>
</html>