<p dir="ltr">So it looks like it was ordered correctly however the PVDM chip is the same chip that goes in the NIM. So cisco put it on the MB instead of how it was ordered on the NIM. I believe I should be able to just move it from the MB to the NIM. </p>
<div class="gmail_quote">On Mar 10, 2016 5:19 PM, "Jose Colon II" <<a href="mailto:jcolon424@gmail.com">jcolon424@gmail.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><p dir="ltr">Thanks guys. I think the thing that is getting me is that it was bought without the PVDM on the NIM. Have to go back and adjust hardware.</p>
<div class="gmail_quote">On Mar 10, 2016 5:17 PM, "Ryan Huff" <<a href="mailto:ryanhuff@outlook.com" target="_blank">ryanhuff@outlook.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">




<div dir="ltr">
<div style="font-size:12pt;color:#000000;background-color:#ffffff;font-family:Calibri,Arial,Helvetica,sans-serif">
<p>Jose,</p>
<p><br>
</p>
<p>You'll be doing essentially the same thing as the G2s; IOS-XE just changes up the syntax a bit. Have a look at:
<a title="http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/guide/ConfT1E1NIM.html
Ctrl+Click or tap to follow the link" href="http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/guide/ConfT1E1NIM.html" target="_blank">
http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/guide/ConfT1E1NIM.html</a>, that should get you started (pay particular attention to the clocking commands).
</p>
<p><br>
</p>
<p><span style="font-size:8pt"><i> |----- CONFIG SAMPLE -----| <br>
 <br>
 card type t1 0 2 <br>
 ! <br>
 isdn switch-type primary-ni <br>
 ! <br>
 network-clock synchronization automatic <br>
 network-clock synchronization participate 0/2 <br>
 ! <br>
 voice-card 0/2 <br>
 dsp services dspfarm <br>
 ! <br>
 controller T1 0/2/0 <br>
 framing esf <br>
 linecode b8zs <br>
 ! <br>
 <br>
 clock source line primary <br>
 <br>
 network-clock input-source 1 controller t1 0/2/0 <br>
 cablelength long 0db <br>
 pri-group timeslots 1-24 voice-dsp <br>
 ! <br>
 interface Serial0/2/0:23 <br>
 encapsulation hdlc <br>
 isdn switch-type primary-ni <br>
 no cdp enable <br>
! </i></span></p>
<p><span style="font-size:8pt"><i></i><br>
</span></p>
<p><i style="font-size:8pt">|----- CONFIG SAMPLE -----|</i> </p>
<p><br>
</p>
<p>Thanks,</p>
<p><br>
</p>
<div>
<div style="font-size:12pt;color:#000000;background-color:#ffffff;font-family:Calibri,Arial,Helvetica,sans-serif">
= Ryan =
<p><br>
</p>
<p><br>
</p>
<p>Email: <a href="mailto:ryanhuff@outlook.com" target="_blank">ryanhuff@outlook.com</a></p>
<p>Spark: <a href="mailto:ryanhuff@outlook.com" target="_blank">ryanhuff@outlook.com</a></p>
<p>Twitter: <a href="http://twitter.com/ryanthomashuff" target="_blank">@ryanthomashuff</a><br>
</p>
<p>LinkedIn: <a href="http://linkedin.com/in/ryanthomashuff" target="_blank">ryanthomashuff</a><br>
</p>
<p>Web <a href="http://ryanthomashuff.com" target="_blank">ryanthomashuff.com</a></p>
</div>
</div>
<br>
<br>
<div style="color:rgb(0,0,0)">
<hr style="display:inline-block;width:98%">
<div dir="ltr"><font color="#000000" face="Calibri, sans-serif" style="font-size:11pt"><b>From:</b> cisco-voip <<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>> on behalf of Jose Colon II <<a href="mailto:jcolon424@gmail.com" target="_blank">jcolon424@gmail.com</a>><br>
<b>Sent:</b> Thursday, March 10, 2016 5:46 PM<br>
<b>To:</b> Cisco VOIP<br>
<b>Subject:</b> [cisco-voip] Cisco 4331 Voice router</font>
<div> </div>
</div>
<div>
<div dir="ltr">I am setting up a 4331 for voice for the first time and was hoping to find one of you with a working config. Looks like there are some differences from the 2900 services and more specifically around the DSP's. 
<div><br>
</div>
<div>I have a Cisco ONE licensed 4331 with a T1 card and a 2 port FXO card. Thanks in advance.</div>
<div><br>
</div>
<div><br>
</div>
</div>
</div>
</div>
</div>
</div>

</blockquote></div>
</blockquote></div>