<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<style type="text/css" style="display:none;"><!-- P {margin-top:0;margin-bottom:0;} --></style>
</head>
<body dir="ltr">
<div id="divtagdefaultwrapper" style="font-size:12pt;color:#000000;background-color:#FFFFFF;font-family:Calibri,Arial,Helvetica,sans-serif;">
<p>Jose,</p>
<p><br>
</p>
<p>You'll be doing essentially the same thing as the G2s; IOS-XE just changes up the syntax a bit. Have a look at:
<a title="http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/guide/ConfT1E1NIM.html
Ctrl+Click or tap to follow the link" href="http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/guide/ConfT1E1NIM.html">
http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/guide/ConfT1E1NIM.html</a>, that should get you started (pay particular attention to the clocking commands).
</p>
<p><br>
</p>
<p><span style="font-size: 8pt;"><i> |----- CONFIG SAMPLE -----| <br>
<br>
card type t1 0 2 <br>
! <br>
isdn switch-type primary-ni <br>
! <br>
network-clock synchronization automatic <br>
network-clock synchronization participate 0/2 <br>
! <br>
voice-card 0/2 <br>
dsp services dspfarm <br>
! <br>
controller T1 0/2/0 <br>
framing esf <br>
linecode b8zs <br>
! <br>
<br>
clock source line primary <br>
<br>
network-clock input-source 1 controller t1 0/2/0 <br>
cablelength long 0db <br>
pri-group timeslots 1-24 voice-dsp <br>
! <br>
interface Serial0/2/0:23 <br>
encapsulation hdlc <br>
isdn switch-type primary-ni <br>
no cdp enable <br>
! </i></span></p>
<p><span style="font-size: 8pt;"><i></i><br>
</span></p>
<p><i style="font-size: 8pt;">|----- CONFIG SAMPLE -----|</i> </p>
<p><br>
</p>
<p>Thanks,</p>
<p><br>
</p>
<div id="Signature">
<div id="divtagdefaultwrapper" style="font-size:12pt; color:#000000; background-color:#FFFFFF; font-family:Calibri,Arial,Helvetica,sans-serif">
= Ryan =
<p><br>
</p>
<p><br>
</p>
<p>Email: ryanhuff@outlook.com</p>
<p>Spark: ryanhuff@outlook.com</p>
<p>Twitter: <a id="LPNoLP" href="http://twitter.com/ryanthomashuff">@ryanthomashuff</a><br>
</p>
<p>LinkedIn: <a id="LPNoLP" href="http://linkedin.com/in/ryanthomashuff">ryanthomashuff</a><br>
</p>
<p>Web <a id="LPNoLP" href="http://ryanthomashuff.com">ryanthomashuff.com</a></p>
</div>
</div>
<br>
<br>
<div style="color: rgb(0, 0, 0);">
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="divRplyFwdMsg" dir="ltr"><font color="#000000" face="Calibri, sans-serif" style="font-size:11pt"><b>From:</b> cisco-voip <cisco-voip-bounces@puck.nether.net> on behalf of Jose Colon II <jcolon424@gmail.com><br>
<b>Sent:</b> Thursday, March 10, 2016 5:46 PM<br>
<b>To:</b> Cisco VOIP<br>
<b>Subject:</b> [cisco-voip] Cisco 4331 Voice router</font>
<div> </div>
</div>
<div>
<div dir="ltr">I am setting up a 4331 for voice for the first time and was hoping to find one of you with a working config. Looks like there are some differences from the 2900 services and more specifically around the DSP's.
<div><br>
</div>
<div>I have a Cisco ONE licensed 4331 with a T1 card and a 2 port FXO card. Thanks in advance.</div>
<div><br>
</div>
<div><br>
</div>
</div>
</div>
</div>
</div>
</body>
</html>