<div dir="ltr">It looks like you need one of the audio input modules for that controller- <a href="http://www.logison.com/components/paging-and-music-components.html">http://www.logison.com/components/paging-and-music-components.html</a><div><br></div><div>You'll want the telephone one.</div><div><br></div><div>As Mike said, supervisor disconnect is only something you need to worry about when it won't cut off the page after completed.</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Fri, Jul 22, 2016 at 2:32 PM, Cannizzaro, Vince <span dir="ltr"><<a href="mailto:Vince.Cannizzaro@hamilton.ca" target="_blank">Vince.Cannizzaro@hamilton.ca</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div lang="EN-CA" link="blue" vlink="purple">
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Hey Brian,<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Thanks for your reply. The vendor connected the analog line to Analog input 3. I plugged an analog phone into the other end but don’t get dial tone.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">I attached a picture to give an idea.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">I don’t see where I can configure supervisor disconnect on the ATA port, may need an FXO as you mentioned. We’re likely looking at getting a Bogen UTI 1 interface
which has the disconnect built in as per the vendor’s recommendations if we can’t use the ATA. I just wanted to make sure I wasn’t missing anything with the ATA before we get additional equipment installed.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Kind regards,<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Vince<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><b><span lang="EN-US" style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span lang="EN-US" style="font-size:10.0pt;font-family:"Tahoma","sans-serif""> <a href="mailto:bmeade90@gmail.com" target="_blank">bmeade90@gmail.com</a> [mailto:<a href="mailto:bmeade90@gmail.com" target="_blank">bmeade90@gmail.com</a>]
<b>On Behalf Of </b>Brian Meade<br>
<b>Sent:</b> July-22-16 2:21 PM<br>
<b>To:</b> Cannizzaro, Vince<br>
<b>Cc:</b> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<b>Subject:</b> Re: [cisco-voip] Supervisory Disconnect on ATA 190<u></u><u></u></span></p><div><div class="h5">
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<p class="MsoNormal">Which input on the Logison NCP are you hooked up to? It sounds like maybe the microphone or AUX input rather than the telephone input as it shouldn't play anything through the speakers until it detects ringing voltage and then goes off-hook.
It may be that this thing needs an FXO port instead. Have you tried hooking up a buttset to the paging controller and seeing if you get dial-tone from it?<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<p class="MsoNormal">On Fri, Jul 22, 2016 at 1:37 PM, Cannizzaro, Vince <<a href="mailto:Vince.Cannizzaro@hamilton.ca" target="_blank">Vince.Cannizzaro@hamilton.ca</a>> wrote:<u></u><u></u></p>
<div>
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif"">Hi everyone,<u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""> <u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif"">I’m trying to connect an ATA 190 to a Logison Paging Module a vendor installed to get paging functionality at a site. The vendor has stated the following:<u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""> <u></u><u></u></span></p>
</div>
<div style="margin-top:5.0pt">
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif"">“Upon dialing the specific extension assigned to paging, this line is “live” (i.e. answers the line A.K.A. Auto Answer) to complete the connection to the Logison NCP and
enables the page to be broadcast on all the Logison Speakers you have assigned to that specific paging zone. The line must also be programmed with Supervisor Disconnect (this ensures that the page is disconnected once the user has stopped talking and hangs
up).”<u></u><u></u></span></p>
</div>
<div style="margin-top:5.0pt">
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""> <u></u><u></u></span></p>
</div>
<div style="margin-top:5.0pt">
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif"">As it stands, as soon as I plug in the analog line into the ATA you can hear dial tone over the speakers and then eventually times out.<u></u><u></u></span></p>
</div>
<div style="margin-top:5.0pt">
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif"">I can’t see where to configure supervisory disconnect on an ATA 190. I can’t use a router FXS port as the router is in another network closet.<u></u><u></u></span></p>
</div>
<div style="margin-top:5.0pt">
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif"">Am I missing something?<u></u><u></u></span></p>
</div>
<div style="margin-top:5.0pt">
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""> <u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif"">Thank you,<u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif"">Vince<u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""> <u></u><u></u></span></p>
</div>
</div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><u></u><u></u></p>
</div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
</div></div></div>
</div>
</blockquote></div><br></div>