<div dir="ltr">Do you have a link you can refer me to which explains how this setting is used?  And, do you know if all TP endpoints support that field equally?<div><br></div><div>I'll give this a try in a few minutes and report back.  Thanks Ryan!</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Thu, Dec 1, 2016 at 12:53 PM, Ryan Ratliff (rratliff) <span dir="ltr"><<a href="mailto:rratliff@cisco.com" target="_blank">rratliff@cisco.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">I’d recommend setting the System Name on the Device page for the C20.  That will sync up with the endpoint’s local setting and avoid any interop issues with the Line value.<br>
<br>
-Ryan<br>
<span class=""><br>
On Dec 1, 2016, at 1:27 PM, Anthony Holloway <<a href="mailto:avholloway%2Bcisco-voip@gmail.com">avholloway+cisco-voip@gmail.<wbr>com</a>> wrote:<br>
<br>
Hi All,<br>
<br>
I am wondering if anyone has solved a certain problem for endpoints which are registered to CUCM.  You know how the system will show a name for the device at the top left of the TV screen?  I'm not talking touch 8 or touch 10 here, but the actual TV or monitor display.<br>
<br>
I would like to show a combination of the name of the room and the phone number as well, but I'm not finding a very good solution to do this.<br>
<br>
I did notice that what shows up by default is from CUCM DN Display field, so I edited it.<br>
<br>
Instead of just this:<br>
<br>
</span><image.png><br>
<br>
I used this:<br>
<br>
<image.png><br>
<span class=""><br>
And that works, but then I face two challenges:<br>
<br>
1) Internal Caller ID is really long and redundant, containing the DN in itself<br>
<br>
Plus, the documentation says you shouldn't put a number in here, probably for the same reason I'm saying (not good practice):<br>
<br>
</span><image.png><br>
<span class=""><br>
2) Or the whole thing is just too long and over the character limit, like this (note I cannot fit the rest of the number):<br>
<br>
</span><image.png><br>
<span class=""><br>
So, that's less than ideal, but atleast it's persistent through reboots of the codec.<br>
<br>
A non-persistent approach I did try, is changing the Codec's SIP DisplayName, which by default is populated with what's in CUCM's DN Display field:<br>
<br>
>From the default:<br>
<br>
</span><image.png><br>
<br>
To this:<br>
<br>
<image.png><br>
<span class=""><br>
<br>
And that works too, but then it's volatile and I have to keep changing them back all the time, and checking up on them, bleh.  No thanks.<br>
<br>
I did look into the start up script option on a TC7.3 C20 codec, so the system can reconfigure its own DisplayName when booting, but that didn't work with the below simple script, despite working when manually clicking Run. I think it didn't work because of the order of operations: 1) boot codec, 2) run script and update display name, 3) register with CUCM, 4) re-update display name from CUCM<br>
<br>
</span><image.png><br>
<span class=""><br>
So anyway, I've done some searching, but not really knowing these systems too well or the terminology, I'm kind of stuck.  I suppose I could write a script in Python and have it check the config and update, and set that to run every 10 minutes or whatever, but I don't know.  Maybe.<br>
<br>
I'll leave it there and see what you all have seen or done.  Thanks much.<br>
<br>
</span>______________________________<wbr>_________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" rel="noreferrer" target="_blank">https://puck.nether.net/<wbr>mailman/listinfo/cisco-voip</a><br>
<br>
</blockquote></div><br></div>