<div dir="ltr">This worked beautifully. And yes, setting it on other side: codec side or CM side, forced an update to the opposite side. Also, no Apply Config/Reset/Restart required, the display at the top just changes.<div><br></div><div>Dang....so simple. Well, I guess that's ignorance for you. I'm new to Telepresence. Thanks so much.</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Thu, Dec 1, 2016 at 1:17 PM, Ryan Ratliff (rratliff) <span dir="ltr"><<a href="mailto:rratliff@cisco.com" target="_blank">rratliff@cisco.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div style="word-wrap:break-word">
All the settings on the Device page correspond pretty directly to the endpoint’s xconfig equivalent. In later TC code and UCM it will even push an update you make on the endpoint up to UCM (for one of those fields).
<div><br>
</div>
<div>There used to be an Admin guide for TP Enpoints with CUCM but I don’t know if it’s been updated since TC6.</div>
<div><br>
</div>
<div>As far as I know just about all TC and CE endpoints share the same settings on the Device page (QED, xml, whatever you are used to calling them). </div><span class="HOEnZb"><font color="#888888">
</font></span><div><span class="HOEnZb"><font color="#888888"><br>
<div>-Ryan </div></font></span><div><div class="h5">
<br>
<div>
<div>On Dec 1, 2016, at 2:13 PM, Anthony Holloway <<a href="mailto:avholloway+cisco-voip@gmail.com" target="_blank">avholloway+cisco-voip@gmail.<wbr>com</a>> wrote:</div>
<br class="m_2014142637713041606Apple-interchange-newline">
<div>
<div dir="ltr">Do you have a link you can refer me to which explains how this setting is used? And, do you know if all TP endpoints support that field equally?
<div><br>
</div>
<div>I'll give this a try in a few minutes and report back. Thanks Ryan!</div>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Thu, Dec 1, 2016 at 12:53 PM, Ryan Ratliff (rratliff)
<span dir="ltr"><<a href="mailto:rratliff@cisco.com" target="_blank">rratliff@cisco.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
I’d recommend setting the System Name on the Device page for the C20. That will sync up with the endpoint’s local setting and avoid any interop issues with the Line value.<br>
<br>
-Ryan<br>
<span><br>
On Dec 1, 2016, at 1:27 PM, Anthony Holloway <<a href="mailto:avholloway%2Bcisco-voip@gmail.com" target="_blank">avholloway+cisco-voip@gmail.c<wbr>om</a>> wrote:<br>
<br>
Hi All,<br>
<br>
I am wondering if anyone has solved a certain problem for endpoints which are registered to CUCM. You know how the system will show a name for the device at the top left of the TV screen? I'm not talking touch 8 or touch 10 here, but the actual TV or monitor
display.<br>
<br>
I would like to show a combination of the name of the room and the phone number as well, but I'm not finding a very good solution to do this.<br>
<br>
I did notice that what shows up by default is from CUCM DN Display field, so I edited it.<br>
<br>
Instead of just this:<br>
<br>
</span><image.png><br>
<br>
I used this:<br>
<br>
<image.png><br>
<span><br>
And that works, but then I face two challenges:<br>
<br>
1) Internal Caller ID is really long and redundant, containing the DN in itself<br>
<br>
Plus, the documentation says you shouldn't put a number in here, probably for the same reason I'm saying (not good practice):<br>
<br>
</span><image.png><br>
<span><br>
2) Or the whole thing is just too long and over the character limit, like this (note I cannot fit the rest of the number):<br>
<br>
</span><image.png><br>
<span><br>
So, that's less than ideal, but atleast it's persistent through reboots of the codec.<br>
<br>
A non-persistent approach I did try, is changing the Codec's SIP DisplayName, which by default is populated with what's in CUCM's DN Display field:<br>
<br>
>From the default:<br>
<br>
</span><image.png><br>
<br>
To this:<br>
<br>
<image.png><br>
<span><br>
<br>
And that works too, but then it's volatile and I have to keep changing them back all the time, and checking up on them, bleh. No thanks.<br>
<br>
I did look into the start up script option on a TC7.3 C20 codec, so the system can reconfigure its own DisplayName when booting, but that didn't work with the below simple script, despite working when manually clicking Run. I think it didn't work because of
the order of operations: 1) boot codec, 2) run script and update display name, 3) register with CUCM, 4) re-update display name from CUCM<br>
<br>
</span><image.png><br>
<span><br>
So anyway, I've done some searching, but not really knowing these systems too well or the terminology, I'm kind of stuck. I suppose I could write a script in Python and have it check the config and update, and set that to run every 10 minutes or whatever,
but I don't know. Maybe.<br>
<br>
I'll leave it there and see what you all have seen or done. Thanks much.<br>
<br>
</span>______________________________<wbr>_________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" rel="noreferrer" target="_blank">https://puck.nether.net/mailma<wbr>n/listinfo/cisco-voip</a><br>
<br>
</blockquote>
</div>
<br>
</div>
</div>
</div>
<br>
</div></div></div>
</div>
</blockquote></div><br></div>