<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body dir="auto">
<div>Start with the basic configuration guide for Expressway 8.9: <a href="http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-9/Cisco-Expressway-Basic-Configuration-Deployment-Guide-X8-9.pdf">http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-9/Cisco-Expressway-Basic-Configuration-Deployment-Guide-X8-9.pdf</a></div>
<div><br>
</div>
<div><br>
</div>
<div>Here is the Expressway 8.9 MRA configuration guide: <a href="http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-9/Mobile-Remote-Access-via-Expressway-Deployment-Guide-X8-9.pdf">http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-9/Mobile-Remote-Access-via-Expressway-Deployment-Guide-X8-9.pdf</a></div>
<div><br>
</div>
<div><br>
</div>
<div>Here are all the Expressway guides, but the two above seem most relevant to what you're trying to accomplish.</div>
<div><br>
</div>
<div><a href="http://www.cisco.com/c/en/us/support/unified-communications/expressway-series/products-installation-and-configuration-guides-list.html">http://www.cisco.com/c/en/us/support/unified-communications/expressway-series/products-installation-and-configuration-guides-list.html</a></div>
<div>
<div><br>
</div>
<div id="AppleMailSignature">Thanks,</div>
<div id="AppleMailSignature"><br>
</div>
<div id="AppleMailSignature">Ryan</div>
<div id="AppleMailSignature"><br>
</div>
On Feb 17, 2017, at 7:25 PM, Carlos G Mendioroz <<a href="mailto:tron@huapi.ba.ar">tron@huapi.ba.ar</a>> wrote:<br>
<br>
</div>
<blockquote type="cite">
<div><span>I do have advance networking, but have been unable to find a definitive</span><br>
<span>guide to have it configured in any way.</span><br>
<span>If you have a pointer to a doc for tshooting, or arquitecture, or ...</span><br>
<span>I'd really appreciate it.</span><br>
<span>Thanks!</span><br>
<span></span><br>
<span>Ryan Huff @ 17/02/2017 21:00 -0300 dixit:</span><br>
<blockquote type="cite"><span>Expressway servers on a stick are not fun. </span><br>
</blockquote>
<blockquote type="cite"><span></span><br>
</blockquote>
<blockquote type="cite"><span>You should note, that using dual interfaces on the expressway E server is the recommended solution.</span><br>
</blockquote>
<blockquote type="cite"><span></span><br>
</blockquote>
<blockquote type="cite"><span>Is there a reason you have to use the single interface? Troubleshooting is much easier and firewall requirements are a little more straightforward with dual interfaces.</span><br>
</blockquote>
<blockquote type="cite"><span></span><br>
</blockquote>
<blockquote type="cite"><span>If you add the advanced networking license option onto the expressway E server and reboot, you'll have the ability to use dual interface (if you don't already have that option).</span><br>
</blockquote>
<blockquote type="cite"><span></span><br>
</blockquote>
<blockquote type="cite"><span>Thanks,</span><br>
</blockquote>
<blockquote type="cite"><span></span><br>
</blockquote>
<blockquote type="cite"><span>Ryan </span><br>
</blockquote>
<blockquote type="cite"><span></span><br>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span>On Feb 17, 2017, at 6:50 PM, Carlos G Mendioroz <<a href="mailto:tron@huapi.ba.ar">tron@huapi.ba.ar</a>> wrote:</span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span></span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span>Single interface.</span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span>On a public IP BTW.</span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span></span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span></span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span>Ryan Huff @ 17/02/2017 20:48 -0300 dixit:</span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>How is your expressway E server configured? Single interface or door interfaces?</span><br>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span></span><br>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>Sent from my iPhone</span><br>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span></span><br>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>On Feb 17, 2017, at 6:40 PM, Carlos G Mendioroz via cisco-voip <<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>> wrote:</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span></span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>Hi,</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>I'm trying to get a pair of Expressway to work with, at least, Jabber</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>for windows.</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span></span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>After a couple of days w/o success with 8.5.3, I reinstalled with 8.9.1.</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>Certs are from StartSSL, C/E pair config seems fine (Traversal zone ok,</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>ssh tunnel active). Internal CM/CUPS/CUC with no TLS verify (using default</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>Self Signed Certs).</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span></span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>SRVs are in place, but no joy. The Jabber client (10.6) connects fine</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>internally, but when trying to access from the outside, it fails with</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>server connection failure.</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span></span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>Tried with SSO disabled on the Expressways, also with it set to On.</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>(Only one CM/CUPS/CUC server inside, no SSO there, 10.5.2)</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span></span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>Help ?</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span></span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>-- </span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>Carlos G Mendioroz <<a href="mailto:tron@huapi.ba.ar">tron@huapi.ba.ar</a>> LW7 EQI Argentina</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>_______________________________________________</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span>cisco-voip mailing list</span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a></span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite"><span><a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a></span><br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span></span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span>-- </span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span>Carlos G Mendioroz <<a href="mailto:tron@huapi.ba.ar">tron@huapi.ba.ar</a>> LW7 EQI Argentina</span><br>
</blockquote>
</blockquote>
<span></span><br>
<span>-- </span><br>
<span>Carlos G Mendioroz <<a href="mailto:tron@huapi.ba.ar">tron@huapi.ba.ar</a>> LW7 EQI Argentina</span><br>
</div>
</blockquote>
</body>
</html>