<div dir="ltr"><div class="gmail_default" style="font-family:tahoma,sans-serif">In some cases the device definitions (e.g. support for new model or new product specific configuration settings) need to be updated. I believe that is another reason that *some* devpacks need to be installed on all nodes rather than just TFTP nodes.</div><div class="gmail_default" style="font-family:tahoma,sans-serif"><br></div><div class="gmail_default" style="font-family:tahoma,sans-serif">If you are concerned about the Device Defaults being updated when you install the devpack on the publisher (a good thing to be thinking about), one thing you could consider doing is as follows. Prior to doing anything, take a snip of the Device Defaults and then stop Cisco TFTP on the TFTP nodes (or de-activate under Service Activation, since these installs sometimes call for a reboot in the docs). Then after your devpack install is complete, go to Device Defaults and change anything back to the pre-devpack state if that is your wish. Then you can start up Cisco TFTP again. After that, you may wish to initiate an all-devices restart by hand or through BAT. Especially if any of the devpack updates affects your existing devices.</div><div class="gmail_default" style="font-family:tahoma,sans-serif"><br></div><div class="gmail_default" style="font-family:tahoma,sans-serif">Just keep in mind, sometimes the product specific configuration updates that are provided with devpacks actually require new device firmware to be installed. So you could get into a state where you try to configure something in UCM with a setting in there, but you can't make the config take effect if you prevent the phone from actually updating to a firmware version that recognizes the new setting flag.</div><div class="gmail_default" style="font-family:tahoma,sans-serif"><br></div><div class="gmail_default" style="font-family:tahoma,sans-serif">-Dave</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Sep 11, 2017 at 2:57 PM, Ryan Huff <span dir="ltr"><<a href="mailto:ryanhuff@outlook.com" target="_blank">ryanhuff@outlook.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="auto">
<div>The only reason I add to all nodes for firmware (versus just tftp) is because and in case, you decide to change how the nodes are used or function in the cluster at some point; then you don't have to worry about what is or is not on the node; just activate
the service and go :).<br>
<br>
Thanks,</div>
<div id="m_5676407704633418271AppleMailSignature"><br>
</div>
<div id="m_5676407704633418271AppleMailSignature">Ryan</div><div><div class="h5">
<div id="m_5676407704633418271AppleMailSignature"><br>
</div>
<div>On Sep 11, 2017, at 2:37 PM, Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>> wrote:<br>
<br>
</div>
<blockquote type="cite">
<div>
<div class="m_5676407704633418271WordSection1">
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">This was my understanding from the last couple of times. We don’t have any alternate TFTP servers so they just attempt to grab it from the one server.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">I don’t even like adding it to the publisher since it updates the device defaults page. And we want to do that in a controlled way.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">---<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Lelio Fulgenzi, B.A.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Senior Analyst, Network Infrastructure<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Computing and Communications Services (CCS)<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">University of Guelph<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><a href="tel:(519)%20824-4120" value="+15198244120" target="_blank">519-824-4120 Ext 56354</a><u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a><u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><a href="http://www.uoguelph.ca/ccs" target="_blank">www.uoguelph.ca/ccs</a><u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Room 037, Animal Science and Nutrition Building<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Guelph, Ontario, N1G 2W1<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">
<a href="mailto:bmeade90@gmail.com" target="_blank">bmeade90@gmail.com</a> [<a href="mailto:bmeade90@gmail.com" target="_blank">mailto:bmeade90@gmail.com</a>]
<b>On Behalf Of </b>Brian Meade<br>
<b>Sent:</b> Monday, September 11, 2017 2:33 PM<br>
<b>To:</b> Lelio Fulgenzi<br>
<b>Cc:</b> voyp list, cisco-voip (<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>)<br>
<b>Subject:</b> Re: [cisco-voip] firmware COP files - TFTP server only? or all nodes?<u></u><u></u></span></p>
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<p class="MsoNormal">That's correct. If you don't install the COP file on the publisher, you'll need to manually update the Device Defaults as well. Otherwise, you just need this on servers running the TFTP service.<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<p class="MsoNormal">On Mon, Sep 11, 2017 at 2:24 PM, Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>> wrote:<u></u><u></u></p>
<p class="MsoNormal" style="margin-bottom:12.0pt"><br>
Just checking the documentation for COP files for firmware and it says to install to all nodes.<br>
<br>
I recalled that if the COP file was just for firmware, we only needed to install it on the TFTP server.<br>
<br>
It's only the devpaks that need to be installed on all nodes since they may likely make database changes.<br>
<br>
Thoughts?<br>
<br>
---<br>
Lelio Fulgenzi, B.A.<br>
Senior Analyst, Network Infrastructure<br>
Computing and Communications Services (CCS)<br>
University of Guelph<br>
<br>
<a href="tel:519-824-4120%20Ext%2056354" target="_blank">519-824-4120 Ext 56354</a><br>
<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a><br>
<a href="http://www.uoguelph.ca/ccs" target="_blank">www.uoguelph.ca/ccs</a><br>
Room 037, Animal Science and Nutrition Building<br>
Guelph, Ontario, N1G 2W1<br>
<br>
<br>
______________________________<wbr>_________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/<wbr>mailman/listinfo/cisco-voip</a><u></u><u></u></p>
</div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
</div>
</div>
</blockquote>
<blockquote type="cite">
<div><span>______________________________<wbr>_________________</span><br>
<span>cisco-voip mailing list</span><br>
<span><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a></span><br>
<span><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/<wbr>mailman/listinfo/cisco-voip</a></span><br>
</div>
</blockquote>
</div></div></div>
<br>______________________________<wbr>_________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" rel="noreferrer" target="_blank">https://puck.nether.net/<wbr>mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br></div>