<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<style type="text/css" style="display:none;"><!-- P {margin-top:0;margin-bottom:0;} --></style>
</head>
<body dir="ltr">
<div id="divtagdefaultwrapper" style="font-size:12pt;color:#000000;font-family:Calibri,Helvetica,sans-serif;" dir="ltr">
<p>Hi Everyone,</p>
<p><br>
</p>
<p>Has any body experiencing configuring <span>RICOH MP C5503 for SIP FAX on Either CUCM as 3th party SIP or on voice gateway?</span></p>
<p><br>
</p>
<p>11.0 CUCM</p>
<p><span>SIP FAX: RICOH MP C5503 </span></p>
<p>Voice router 4431.</p>
<p><br>
</p>
<p>I have configured Route Pattern in CUCM and pointed the router group and then to the voice gateway.</p>
<p>I configured Dial peer in voice router but when I dial the FAX is not picking up. When I try to dial out, nothing is happening as well.</p>
<p><br>
</p>
<p>Dial Peer as shown below:</p>
<p></p>
<div>dial-peer voice 500 voip<br>
description Ricoh 072<br>
destination-pattern 10 digit #<br>
session protocol sipv2<br>
session target ipv4:x.x.x.x<br>
voice-class codec 1<br>
dtmf-relay rtp-nte<br>
no vad<br>
!<br>
dial-peer voice 501 voip<br>
description Ricoh 073<br>
destination-pattern 10 digit #<br>
session protocol sipv2<br>
session target ipv4:x.x.x.x<br>
voice-class codec 1<br>
dtmf-relay rtp-nte</div>
<div><br>
</div>
<div>I'm just wondering if I'm missing any configuration.<br>
</div>
<p></p>
<p><span></p>
<p><br>
</p>
<p>if you can point to the any document that I can follow to make sure everything is setup correctly, that would be appreciated.</p>
<p><br>
</p>
<p><br>
</p>
</span>
<p></p>
</div>
</body>
</html>