<div dir="ltr">Running through some ideas in my lab and just trying to see whether I could operate a setup with phones by default setup with a logged out EM Profile, essentially making the phone a permanent setup, but allowing the maintenance of a single record (the EM Profile).<div><br></div><div>Things seem to work ok, but I'm just trying to run through and find any possible issues.  In terms of my notes so far:</div><div><ul><li><br></li><li> EM Profile loaded as the default logged out profile needs to be specific to the model of phone.  You can still use the profile to login to other phones not of the same type via the Phone Services Menu.<br></li><li> Changes made to the Device profile settings require a logout / login of the profile to the phone.  Achieve this by unchecking the 'Enable EM' checkbox, save the change, then recheck the box and save again.<br></li><li> Jabber CTI Phone control still works (assuming you've associated the UDP to the user as per standard).<br></li><li> Querying the Extension Mobility logged in report doesn't show the profile as logged in when used in the logged out profile role.<br></li><li> Same results on EM Query when running against the EMServicability API (nothing marked as logged into the device).<br></li><li> Can be a hassle finding out which phone has the profile active in the logged out capability.  Had to use the Dependancy Records option to trace things down.<br></li><ul><li>This is probably the biggest hassle from an admin perspective.  Can be worked around by keeping desc field updated with the DN but that'll end up getting missed by people as they update things.  </li><li>Would probably look at a scheduled job to update phone descriptions via AXL I was to use with using this setup.</li></ul></ul><div><br></div><div>Can anyone think of possible issues with this kind of setup?</div><div><br></div><div>Thanks</div><div><br></div><div>Nathan</div><br></div><div><br></div></div>