<div dir="ltr">Regions are important for a working call flow, yes. However, regions only exist on CUCM, not on gateways.<div><br></div><div>The way in which regions/codec selection could produce the issue your seeing is as follows:</div><div><br></div><div>Dial Peer has g711ulaw on it</div><div>CUCM SIP Trunk has Gateway-Region on it</div><div>CIPC has Phone-Region on it</div><div>Gateway-Region to Phone-Region is using 8kbps<br><br><div class="gmail_quote"><div dir="ltr">On Wed, Feb 28, 2018 at 12:30 PM Hamu Ebiso <<a href="mailto:hebiso2010@hotmail.com">hebiso2010@hotmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div id="m_-6053197831470545477divtagdefaultwrapper" style="font-size:12pt;color:#000000;font-family:Calibri,Helvetica,sans-serif" dir="ltr">
<p style="margin-top:0px;margin-bottom:0px">Region is not define in the config but CUCM. Is that what you need? That is the only config I have. and don't see any region defined in the gateway.</p>
<p style="margin-top:0px;margin-bottom:0px"><br>
</p>
<p style="margin-top:0px;margin-bottom:0px">thanks</p>
<p style="margin-top:0px;margin-bottom:0px">hamu<br>
</p>
<br>
<br>
<div style="color:rgb(0,0,0)">
<hr style="width:98%;display:inline-block">
<div id="m_-6053197831470545477divRplyFwdMsg" dir="ltr"><font color="#000000" face="Calibri, sans-serif" style="font-size:11pt"><b>From:</b> Anthony Holloway <<a href="mailto:avholloway%2Bcisco-voip@gmail.com" target="_blank">avholloway+cisco-voip@gmail.com</a>><br>
<b>Sent:</b> Wednesday, February 28, 2018 11:19 AM</font></div></div></div></div><div dir="ltr"><div id="m_-6053197831470545477divtagdefaultwrapper" style="font-size:12pt;color:#000000;font-family:Calibri,Helvetica,sans-serif" dir="ltr"><div style="color:rgb(0,0,0)"><div id="m_-6053197831470545477divRplyFwdMsg" dir="ltr"><font color="#000000" face="Calibri, sans-serif" style="font-size:11pt"><br>
<b>To:</b> Hamu Ebiso<br>
<b>Cc:</b> cisco-voip voyp list<br>
<b>Subject:</b> Re: [cisco-voip] Need help configuring router for 911 with POTS Lines connected to FXO port on the router</font></div></div></div></div><div dir="ltr"><div id="m_-6053197831470545477divtagdefaultwrapper" style="font-size:12pt;color:#000000;font-family:Calibri,Helvetica,sans-serif" dir="ltr"><div style="color:rgb(0,0,0)">
<div>
<div dir="ltr">But you didn't send all the information, because your output doesn't show the dial-peers.
<div><br>
</div>
<div>One method is to capture the output from "debug voip ccapi inout" and look for the following line "Outgoing Dial-peer="</div>
<div><br>
</div>
<div>You also didn't address the regions either. Can you send that too?</div>
</div>
<br>
<div class="m_-6053197831470545477x_gmail_quote">
<div dir="ltr">On Wed, Feb 28, 2018 at 11:13 AM Hamu Ebiso <<a href="mailto:hebiso2010@hotmail.com" target="_blank">hebiso2010@hotmail.com</a>> wrote:<br>
</div>
<blockquote class="m_-6053197831470545477x_gmail_quote" style="margin:0px 0px 0px 0.8ex;padding-left:1ex;border-left-color:rgb(204,204,204);border-left-width:1px;border-left-style:solid">
<div dir="ltr">
<div id="m_-6053197831470545477x_m_2219273772835208879divtagdefaultwrapper" style="color:rgb(0,0,0);font-family:Calibri,Helvetica,sans-serif;font-size:12pt" dir="ltr">
<p style="margin-top:0px;margin-bottom:0px">I was just trying to give you all the information so that you will be able to see the whole picture.</p>
<p style="margin-top:0px;margin-bottom:0px">Regarding your questions, I don't know how to check that.<br>
</p>
<br>
<br>
<div style="color:rgb(0,0,0)">
<hr style="width:98%;display:inline-block">
<div id="m_-6053197831470545477x_m_2219273772835208879divRplyFwdMsg" dir="ltr"><font color="#000000" face="Calibri, sans-serif" style="font-size:11pt"><b>From:</b> Anthony Holloway <<a href="mailto:avholloway%2Bcisco-voip@gmail.com" target="_blank">avholloway+cisco-voip@gmail.com</a>><br>
<b>Sent:</b> Wednesday, February 28, 2018 10:45 AM</font></div>
</div>
</div>
</div>
<div dir="ltr">
<div id="m_-6053197831470545477x_m_2219273772835208879divtagdefaultwrapper" style="color:rgb(0,0,0);font-family:Calibri,Helvetica,sans-serif;font-size:12pt" dir="ltr">
<div style="color:rgb(0,0,0)">
<div id="m_-6053197831470545477x_m_2219273772835208879divRplyFwdMsg" dir="ltr"><font color="#000000" face="Calibri, sans-serif" style="font-size:11pt"><br>
<b>To:</b> Hamu Ebiso<br>
<b>Cc:</b> cisco-voip voyp list<br>
<b>Subject:</b> Re: [cisco-voip] Need help configuring router for 911 with POTS Lines connected to FXO port on the router</font></div>
</div>
</div>
</div>
<div dir="ltr">
<div id="m_-6053197831470545477x_m_2219273772835208879divtagdefaultwrapper" style="color:rgb(0,0,0);font-family:Calibri,Helvetica,sans-serif;font-size:12pt" dir="ltr">
<div style="color:rgb(0,0,0)">
<div>
<div dir="ltr">That's interesting that I asked for the dial-peer config, and you sent everything but.
<div><br>
</div>
<div>Do you know how to confirm which dial-peer the gateway is using?</div>
</div>
<br>
<div class="m_-6053197831470545477x_m_2219273772835208879x_gmail_quote">
<div dir="ltr">On Wed, Feb 28, 2018 at 10:38 AM Hamu Ebiso <<a href="mailto:hebiso2010@hotmail.com" target="_blank">hebiso2010@hotmail.com</a>> wrote:<br>
</div>
<blockquote class="m_-6053197831470545477x_m_2219273772835208879x_gmail_quote" style="margin:0px 0px 0px 0.8ex;padding-left:1ex;border-left-color:rgb(204,204,204);border-left-width:1px;border-left-style:solid">
<div dir="ltr">
<div id="m_-6053197831470545477x_m_2219273772835208879x_m_-8897566770194573471divtagdefaultwrapper" style="color:rgb(0,0,0);font-family:Calibri,Helvetica,sans-serif;font-size:12pt" dir="ltr">
<p style="margin-top:0px;margin-bottom:0px">Below is gateway configuration</p>
<p style="margin-top:0px;margin-bottom:0px"><br>
</p>
<p style="margin-top:0px;margin-bottom:0px"><br>
</p>
<p style="margin-top:0px;margin-bottom:0px"><br>
</p>
<p style="margin-top:0px;margin-bottom:0px"></p>
<div>
<div>isdn switch-type primary-ni<br>
!<br>
!<br>
trunk group FXO_EM<br>
hunt-scheme sequential<br>
translation-profile incoming Incoming<br>
!<br>
!<br>
trunk group Local<br>
hunt-scheme sequential<br>
translation-profile outgoing outbound<br>
!<br>
!<br>
trunk group LD<br>
translation-profile outgoing outbound<br>
!<br>
voice-card 0<br>
dspfarm<br>
dsp services dspfarm<br>
!<br>
!<br>
voice call send-alert<br>
voice rtp send-recv<br>
!<br>
voice service voip<br>
ip address trusted list<br>
ipv4 10.170.99.12<br>
ipv4 10.44.50.14<br>
ipv4 10.44.50.39<br>
no ip address trusted authenticate<br>
clid substitute name<br>
clid network-provided<br>
allow-connections h323 to h323<br>
allow-connections h323 to sip<br>
allow-connections sip to h323<br>
allow-connections sip to sip<br>
redirect ip2ip<br>
signaling forward unconditional<br>
fax protocol t38 nse force version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw<br>
no fax-relay sg3-to-g3<br>
modem passthrough nse codec g711ulaw<br>
sip<br>
bind control source-interface Loopback0<br>
bind media source-interface Loopback0<br>
session transport tcp<br>
min-se 360 session-expires 360<br>
ds0-num<br>
header-passing<br>
error-passthru<br>
registrar server expires max 600 min 60<br>
early-offer forced<br>
midcall-signaling passthru<br>
no call service stop<br>
!<br>
!<br>
voice class uri 10 sip<br>
host ipv4:10.x.x.x<br>
host ipv4:10..x.x.x<br>
host ipv4:10..x.x.x<br>
voice class codec 1<br>
codec preference 1 g711ulaw<br>
codec preference 2 g729r8<br>
!<br>
voice class codec 2<br>
codec preference 1 g711ulaw<br>
!<br>
!<br>
!<br>
!<br>
voice translation-rule 1<br>
rule 1 /^208343\(....\)$/ /1208343\1/<br>
!<br>
voice translation-rule 9<br>
rule 1 /5.../ /1208343\0/<br>
!<br>
voice translation-rule 10<br>
rule 1 /^911/ /911/<br>
rule 2 /^9911/ /911/<br>
!<br>
voice translation-rule 15<br>
!<br>
voice translation-rule 30<br>
rule 1 /^911/ /911/<br>
rule 2 /^9911/ /911/<br>
rule 4 /^9\(011.*\)/ /\1/<br>
rule 9 /^9\(.*\)/ /\1/<br>
!<br>
!<br>
voice translation-profile Add1<br>
translate calling 91<br>
translate called 1<br>
!<br>
voice translation-profile Inbound<br>
translate called 1<br>
!<br>
voice translation-profile Strip9<br>
translate called 10<br>
!<br>
voice translation-profile block_profile<br>
translate calling 15<br>
!<br>
voice translation-profile outbound<br>
translate calling 10<br>
!<br>
!<br>
crypto pki token default removal timeout 0<br>
!<br>
!<br>
!<br>
!<br>
license udi pid CISCO3845-MB sn FOC123128X5<br>
license accept end user agreement<br>
archive<br>
log config<br>
hidekeys<br>
username admin privilege 15 password 7 105D1F0C<br>
username svuntbd privilege 15 secret 5 $1$vRxN$nu4JPZttcuPskPHoSdQZx.<br>
!<br>
!<br>
controller T1 0/0/0<br>
shutdown<br>
cablelength long 0db<br>
!<br>
controller T1 0/1/0<br>
shutdown<br>
cablelength long 0db<br>
!<br>
!<br>
!<br>
!<br>
!<br>
!<br>
interface Loopback0<br>
ip address 10.x.x.x 255.255.255.128<br>
!<br>
interface GigabitEthernet0/0<br>
description uplink to Lan1<br>
ip address 10.x.x.x 255.255.255.252<br>
duplex auto<br>
speed auto<br>
media-type rj45<br>
!<br>
interface GigabitEthernet0/1<br>
description uplink to Lan2<br>
ip address 10.x.x.x 255.255.255.252<br>
duplex auto<br>
speed auto<br>
media-type rj45<br>
!<br>
router ospf 1<br>
auto-cost reference-bandwidth 10000<br>
network 10.0.0.0 0.0.255.255 area 10.0.0.0<br>
!<br>
ip forward-protocol nd<br>
!<br>
!<br>
no ip http server<br>
no ip http secure-server<br>
!</div>
<div><br>
</div>
<div><br>
</div>
</div>
<p></p>
</div>
</div>
</blockquote>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</div>
</div></div></div></blockquote></div></div></div>