<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<style type="text/css" style="display:none;"><!-- P {margin-top:0;margin-bottom:0;} --></style>
</head>
<body dir="ltr">
<div id="divtagdefaultwrapper" style="font-size:12pt;color:#000000;font-family:Calibri,Helvetica,sans-serif;" dir="ltr">
<p style="margin-top: 0px; margin-bottom: 0px;">Thank you Anthony very much. I really appreciated your guidance. I was able to make work with the sip setup and incoming calls are now working fine but it doesn't have caller ID. I have attached the logs.<br>
</p>
<p><br>
</p>
<p>below is the config.</p>
<p><br>
</p>
<p></p>
<div>control-plane<br>
!<br>
!<br>
voice-port 0/2/0<br>
trunk-group FXO_EM<br>
no battery-reversal<br>
input gain 1<br>
echo-cancel mode 1<br>
no vad<br>
no comfort-noise<br>
connection plar 12089588038<br>
impedance 900r<br>
description 208-343-0207<br>
caller-id enable<br>
!<br>
voice-port 0/2/1<br>
trunk-group FXO_EM<br>
connection plar 12089588038<br>
description 208-343-3497<br>
caller-id enable<br>
</div>
<p></p>
<p><br>
</p>
<div>dial-peer voice 2 voip<br>
preference 1<br>
destination-pattern 1208958....<br>
session protocol sipv2<br>
session target ipv4:10.170.99.12<br>
voice-class codec 1<br>
voice-class sip options-keepalive up-interval 12 down-interval 65 retry 2<br>
dtmf-relay rtp-nte<br>
no vad<br>
</div>
<p></p>
<p><br>
</p>
<div style="color: rgb(0, 0, 0);">
<hr tabindex="-1" style="width: 98%; display: inline-block;">
<div id="divRplyFwdMsg" dir="ltr"><font color="#000000" face="Calibri, sans-serif" style="font-size: 11pt;"><b>From:</b> Anthony Holloway <avholloway+cisco-voip@gmail.com><br>
<b>Sent:</b> Friday, March 2, 2018 9:52 AM<br>
<b>To:</b> Hamu Ebiso<br>
<b>Cc:</b> Cisco VoIP Group<br>
<b>Subject:</b> Re: [cisco-voip] Need help configuring router for 911 with POTS Lines connected to FXO port on the router</font>
<div> </div>
</div>
<div>
<div dir="ltr">Nope. It's SIP or die dude.
<div><br>
</div>
<div>You already have a SIP dial-peer pointing at CUCM:</div>
<div><br>
</div>
<div><span style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;">dial-peer voice 2 voip</span><br style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;">
<span style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;"> description CUCM Dial-Peer - Inbound</span><br style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;">
<span style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;"> preference 1</span><br style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;">
<span style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;"> destination-pattern </span><a id="LPlnk428361" style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;" href="tel:(208)%20685-8038" target="_blank" value="+12086858038" previewremoved="true">12086858038</a><br style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;">
<span style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;"> session protocol sipv2</span><br style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;">
<span style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;"> session target ipv4:10.0.2.6</span><br style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;">
<span style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;"> incoming uri via 10</span><br style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;">
<span style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;"> voice-class codec 1</span><br style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;">
<span style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;"> dtmf-relay rtp-nte sip-kpml</span><br style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;">
<span style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;"> fax-relay ecm disable</span><br style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;">
<span style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;"> fax nsf 000000</span><br style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;">
<span style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;"> ip qos dscp cs3 signaling</span><br style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;">
<span style="font-family: Calibri,Helvetica,sans-serif; font-size: 16px;"> no vad</span> </div>
<div>!<br>
</div>
<div><br>
</div>
<div>You still have an issue with the number you're dialing and what's in your destination pattern. But if you use the above dial peer config on dial-peer 5, then maybe you'll actually send a SIP INVITE to CUCM.</div>
<div><br>
</div>
<div>I just want to say, there are bigger issues here than just your POTS call to CIPC. I work for a Cisco Partner in your city, and if you want, we can talk about having me come help you in person on this project. Let me know.<br>
</div>
<div><br>
<div class="x_gmail_quote">
<div dir="ltr">On Fri, Mar 2, 2018 at 9:12 AM Hamu Ebiso <<a id="LPlnk427539" href="mailto:hebiso2010@hotmail.com" previewremoved="true">hebiso2010@hotmail.com</a>> wrote:<br>
</div>
<blockquote class="x_gmail_quote" style="margin: 0px 0px 0px 0.8ex; padding-left: 1ex; border-left-color: rgb(204, 204, 204); border-left-width: 1px; border-left-style: solid;">
<div dir="ltr">
<div id="x_m_-8988581562981479245divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<p style="margin-top: 0px; margin-bottom: 0px;">Hi Anthony,</p>
<p style="margin-top: 0px; margin-bottom: 0px;"><br>
</p>
<p style="margin-top: 0px; margin-bottom: 0px;">do you think I should change the setting between CUCM and Gateway to H.323 instead of SIP? do you think that makes it easy?</p>
<p style="margin-top: 0px; margin-bottom: 0px;"><br>
</p>
<p style="margin-top: 0px; margin-bottom: 0px;">Thanks</p>
<p style="margin-top: 0px; margin-bottom: 0px;">Hamu<br>
</p>
<br>
<br>
<div style="color: rgb(0, 0, 0);">
<hr style="width: 98%; display: inline-block;">
<div id="x_m_-8988581562981479245divRplyFwdMsg" dir="ltr"><font color="#000000" face="Calibri, sans-serif" style="font-size: 11pt;"><b>From:</b> Anthony Holloway <<a id="LPlnk60121" href="mailto:avholloway%2Bcisco-voip@gmail.com" target="_blank" previewremoved="true">avholloway+cisco-voip@gmail.com</a>><br>
<b>Sent:</b> Thursday, March 1, 2018 1:16 PM<br>
<b>To:</b> Hamu Ebiso</font></div>
</div>
</div>
</div>
<div dir="ltr">
<div id="x_m_-8988581562981479245divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<div style="color: rgb(0, 0, 0);">
<div id="x_m_-8988581562981479245divRplyFwdMsg" dir="ltr"><font color="#000000" face="Calibri, sans-serif" style="font-size: 11pt;"><br>
<b>Cc:</b> Cisco VoIP Group<br>
<b>Subject:</b> Re: [cisco-voip] Need help configuring router for 911 with POTS Lines connected to FXO port on the router</font></div>
</div>
</div>
</div>
<div dir="ltr">
<div id="x_m_-8988581562981479245divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<div style="color: rgb(0, 0, 0);">
<div>
<div dir="ltr">debug voip ccapi inout, and if you're using SIP, then debug ccsip messages as well. the debug vpm signal is not very helpful, though it does show the port selected.</div>
<br>
<div class="x_m_-8988581562981479245x_gmail_quote">
<div dir="ltr">On Thu, Mar 1, 2018 at 1:05 PM Hamu Ebiso <<a id="LPlnk799300" href="mailto:hebiso2010@hotmail.com" target="_blank" previewremoved="true">hebiso2010@hotmail.com</a>> wrote:<br>
</div>
<blockquote class="x_m_-8988581562981479245x_gmail_quote" style="margin: 0px 0px 0px 0.8ex; padding-left: 1ex; border-left-color: rgb(204, 204, 204); border-left-width: 1px; border-left-style: solid;">
<div dir="ltr">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<p style="margin-top: 0px; margin-bottom: 0px;">Thank you Anthony very much for your help.<br>
</p>
<p><span>The <span><a id="LPlnk906614" href="tel:(952)%20947-3283" target="_blank" value="+19529473283" previewremoved="true">19529473283</a></span> for connection plar
<a id="LPlnk536291" href="tel:(952)%20947-3283" target="_blank" value="+19529473283" previewremoved="true">
19529473283</a> I was testing with. After changing of few things on the gateway, I'm now seeing different messages when I run debug. The calls used to ring only one time and then fast busy, now it rings twice and then fax busy for incoming. for outgoing, it's
says calls connot be completed as dialed.</span></p>
<p><span><br>
</span></p>
<p><span>Attached the new logs again. I really appreciate your help.</span></p>
<p><span><br>
</span></p>
<p><span>thanks again.</span></p>
<p><span>Hamu</span></p>
<p><br>
</p>
<div style="color: rgb(0, 0, 0);">
<hr style="width: 98%; display: inline-block;">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543divRplyFwdMsg" dir="ltr">
<font color="#000000" face="Calibri, sans-serif" style="font-size: 11pt;"><b>From:</b> Anthony Holloway <<a id="LPlnk385148" href="mailto:avholloway%2Bcisco-voip@gmail.com" target="_blank" previewremoved="true">avholloway+cisco-voip@gmail.com</a>><br>
<b>Sent:</b> Thursday, March 1, 2018 11:05 AM</font></div>
</div>
</div>
</div>
<div dir="ltr">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<div style="color: rgb(0, 0, 0);">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543divRplyFwdMsg" dir="ltr">
<font color="#000000" face="Calibri, sans-serif" style="font-size: 11pt;"><br>
<b>To:</b> Hamu Ebiso<br>
<b>Cc:</b> Cisco VoIP Group<br>
<b>Subject:</b> Re: [cisco-voip] Need help configuring router for 911 with POTS Lines connected to FXO port on the router</font></div>
</div>
</div>
</div>
<div dir="ltr">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<div style="color: rgb(0, 0, 0);">
<div>
<div dir="ltr">According to the debug, you're calling <a id="LPlnk314680" href="tel:(952)%20947-3283" target="_blank" value="+19529473283" previewremoved="true">
19529473283</a>. Is that correct?
<div><br>
</div>
<div>
<pre class="x_m_-8988581562981479245x_m_-7869792497629053543x_inbox-inbox-ndfHFb-c4YZDc-pf-DARUcf" style="font-family: "Courier New",Courier,monospace,arial,sans-serif; font-size: 14px; margin-top: 0px; margin-bottom: 0px; white-space: pre-wrap;">Called Number=<a id="LPlnk925112" href="tel:(952)%20947-3283" target="_blank" value="+19529473283" previewremoved="true">19529473283</a>(TON=Unknown, NPI=Unknown),</pre>
<div><br>
</div>
<div>If so, then this debug is not for this gateway, because you're hitting Outgoing Dial-peer=5</div>
<div><br>
</div>
<div>
<pre class="x_m_-8988581562981479245x_m_-7869792497629053543x_inbox-inbox-ndfHFb-c4YZDc-pf-DARUcf" style="font-family: "Courier New",Courier,monospace,arial,sans-serif; font-size: 14px; margin-top: 0px; margin-bottom: 0px; white-space: pre-wrap;">Outgoing Dial-peer=5, Params=0x688FF3FC, Progress Indication=ORIGINATING SIDE IS NON ISDN(3)</pre>
</div>
<div><br>
</div>
<div>And dial-peer 5, while it exists in your config you pasted, it doesn't match the called number.</div>
<div><br>
</div>
<div>
<div><font face="monospace">dial-peer voice 5 voip</font></div>
<div><font face="monospace"> description FXO test</font></div>
<div><font face="monospace"> destination-pattern <a id="LPlnk308097" href="tel:(208)%20343-7020" target="_blank" value="+12083437020" previewremoved="true">
12083437020</a></font></div>
<div><font face="monospace"> session target ipv4:10.0.2.5</font></div>
</div>
<div><font face="monospace">!</font></div>
<div><br>
</div>
<div>Even if it did match the destination pattern, you're missing some config on this dial-peer to make a SIP capable dial-peer, which means it's sending H323 setup to CUCM. If you built the gateway as H323, then I can see how it rang your CIPC, otherwise,
if you built it as SIP, which you said you did, then it would never ring your CIPC.</div>
<div><br>
</div>
<div>So, something is not adding up here.</div>
<div><br>
</div>
<div>Also, you're hitting Incoming Dial-peer=0, which on a POTS leg is not too terrible, but it's also not good practice to be using dial-peer 0. It's really VoIP DP 0 that is messy though.<br>
</div>
<div><br>
</div>
<div>
<pre class="x_m_-8988581562981479245x_m_-7869792497629053543x_inbox-inbox-ndfHFb-c4YZDc-pf-DARUcf" style="font-family: "Courier New",Courier,monospace,arial,sans-serif; font-size: 14px; margin-top: 0px; margin-bottom: 0px; white-space: pre-wrap;">Incoming Dial-peer=0, Progress Indication=ORIGINATING SIDE IS NON ISDN(3), Calling IE Present=FALSE,</pre>
</div>
<div><br>
</div>
</div>
</div>
<br>
<div class="x_m_-8988581562981479245x_m_-7869792497629053543x_gmail_quote">
<div dir="ltr">On Thu, Mar 1, 2018 at 10:06 AM Hamu Ebiso <<a id="LPlnk665604" href="mailto:hebiso2010@hotmail.com" target="_blank" previewremoved="true">hebiso2010@hotmail.com</a>> wrote:<br>
</div>
<blockquote class="x_m_-8988581562981479245x_m_-7869792497629053543x_gmail_quote" style="margin: 0px 0px 0px 0.8ex; padding-left: 1ex; border-left-color: rgb(204, 204, 204); border-left-width: 1px; border-left-style: solid;">
<div dir="ltr">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<p style="margin-top: 0px; margin-bottom: 0px;">Hi Anthony,</p>
<p style="margin-top: 0px; margin-bottom: 0px;"><br>
</p>
<p style="margin-top: 0px; margin-bottom: 0px;">yes the call was hitting the gateway because I was seeing FXO port going Off-Hook. The problem was that Logging was not setup in the gateway. After I setup the Logging, I'm now seeing logs.</p>
<p style="margin-top: 0px; margin-bottom: 0px;"><br>
</p>
<p style="margin-top: 0px; margin-bottom: 0px;">I have attached the log.<br>
</p>
<p><br>
thanks</p>
<p>Hamu<br>
</p>
<div style="color: rgb(0, 0, 0);">
<hr style="width: 98%; display: inline-block;">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071divRplyFwdMsg" dir="ltr">
<font color="#000000" face="Calibri, sans-serif" style="font-size: 11pt;"><b>From:</b>
<a id="LPlnk320228" href="mailto:avholloway@gmail.com" target="_blank" previewremoved="true">
avholloway@gmail.com</a> <<a id="LPlnk894081" href="mailto:avholloway@gmail.com" target="_blank" previewremoved="true">avholloway@gmail.com</a>> on behalf of Anthony Holloway <<a id="LPlnk270175" href="mailto:avholloway%2Bcisco-voip@gmail.com" target="_blank" previewremoved="true">avholloway+cisco-voip@gmail.com</a>><br>
<b>Sent:</b> Thursday, March 1, 2018 8:45 AM<br>
<b>To:</b> Hamu Ebiso<br>
<b>Cc:</b> Cisco VoIP Group</font></div>
</div>
</div>
</div>
<div dir="ltr">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<div style="color: rgb(0, 0, 0);">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071divRplyFwdMsg" dir="ltr">
<font color="#000000" face="Calibri, sans-serif" style="font-size: 11pt;"><br>
<b>Subject:</b> Re: [cisco-voip] Need help configuring router for 911 with POTS Lines connected to FXO port on the router</font></div>
</div>
</div>
</div>
<div dir="ltr">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<div style="color: rgb(0, 0, 0);">
<div>
<div dir="auto">Since you didn't see the call in your debugs, your call likely didn't hit your gateway.
<div dir="auto"><br>
</div>
<div dir="auto">Can you confirm how you made your test call, when you had your debug running?</div>
</div>
<div class="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_gmail_extra">
<br>
<div class="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_gmail_quote">
On Feb 28, 2018 2:46 PM, "Hamu Ebiso" <<a id="LPlnk597189" href="mailto:hebiso2010@hotmail.com" target="_blank" previewremoved="true">hebiso2010@hotmail.com</a>> wrote:<br type="attribution">
<blockquote class="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_gmail_quote" style="margin: 0px 0px 0px 0.8ex; padding-left: 1ex; border-left-color: rgb(204, 204, 204); border-left-width: 1px; border-left-style: solid;">
<div dir="ltr">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<p style="margin-top: 0px; margin-bottom: 0px;"></p>
<div>Here is the dial-peer output</div>
<div><br>
</div>
<div>1#show run | sec dial-peer<br>
dial-peer voice 1 pots<br>
trunkgroup FXO_EM<br>
translation-profile incoming Inbound<br>
call-block translation-profile incoming block_profile<br>
call-block disconnect-cause incoming call-reject<br>
incoming called-number .<br>
direct-inward-dial<br>
dial-peer voice 911 pots<br>
trunkgroup FXO_EM<br>
description Services<br>
translation-profile outgoing Strip9<br>
destination-pattern 911<br>
dial-peer voice 9911 pots<br>
trunkgroup FXO_EM<br>
description Services<br>
translation-profile outgoing Strip9<br>
destination-pattern 9911<br>
dial-peer voice 2 voip<br>
description CUCM Dial-Peer - Inbound<br>
preference 1<br>
destination-pattern <a id="LPlnk67371" href="tel:(208)%20685-8038" target="_blank" value="+12086858038" previewremoved="true">
12086858038</a><br>
session protocol sipv2<br>
session target ipv4:10.0.2.6<br>
incoming uri via 10<br>
voice-class codec 1<br>
dtmf-relay rtp-nte sip-kpml<br>
fax-relay ecm disable<br>
fax nsf 000000<br>
ip qos dscp cs3 signaling<br>
no vad<br>
dial-peer voice 3 voip<br>
preference 2<br>
destination-pattern <a id="LPlnk943737" href="tel:(208)%20685-8038" target="_blank" value="+12086858038" previewremoved="true">
12086858038</a><br>
session target ipv4:10.0.2.3<br>
dial-peer voice 650 pots<br>
trunkgroup Local<br>
description Local outbound<br>
translation-profile outgoing Strip9<br>
destination-pattern 9208.......<br>
dial-peer voice 4 pots<br>
trunkgroup FXO_EM<br>
description ** 10-digit Local Call **<br>
translation-profile outgoing Strip9<br>
destination-pattern ^9[2-9]..[2-9]......$<br>
forward-digits 10<br>
dial-peer voice 5 voip<br>
description FXO test<br>
destination-pattern <a id="LPlnk658799" href="tel:(208)%20343-7020" target="_blank" value="+12083437020" previewremoved="true">
12083437020</a><br>
session target ipv4:10.0.2.5<br>
</div>
<p></p>
<p><br>
</p>
thank you very much!!<br>
<br>
<div style="color: rgb(0, 0, 0);">
<hr style="width: 98%; display: inline-block;">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705divRplyFwdMsg" dir="ltr">
<font color="#000000" face="Calibri, sans-serif" style="font-size: 11pt;"><b>From:</b> Anthony Holloway <<a id="LPlnk109093" href="mailto:avholloway%2Bcisco-voip@gmail.com" target="_blank" previewremoved="true">avholloway+cisco-voip@gmail.com</a>><br>
<b>Sent:</b> Wednesday, February 28, 2018 1:29 PM<br>
<b>To:</b> Hamu Ebiso<br>
<b>Cc:</b> cisco-voip voyp list<br>
<b>Subject:</b> Re: [cisco-voip] Need help configuring router for 911 with POTS Lines connected to FXO port on the router</font>
<div> </div>
</div>
<div>
<div dir="ltr">Maybe you're actually using MGCP then? You still haven't shown the dial-peers on the gateway. Is that because you don't have any?
<div><br>
</div>
<div>show run | section dial-peer<br>
<br>
<div class="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_gmail_quote">
<div dir="ltr">On Wed, Feb 28, 2018 at 12:19 PM Hamu Ebiso <<a id="LPlnk20722" href="mailto:hebiso2010@hotmail.com" target="_blank" previewremoved="true">hebiso2010@hotmail.com</a>> wrote:<br>
</div>
<blockquote class="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_gmail_quote" style="margin: 0px 0px 0px 0.8ex; padding-left: 1ex; border-left-color: rgb(204, 204, 204); border-left-width: 1px; border-left-style: solid;">
<div dir="ltr">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_m_6475442122256384463divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<p style="margin-top: 0px; margin-bottom: 0px;">debug was turned on as shown below.</p>
<p style="margin-top: 0px; margin-bottom: 0px;"><br>
</p>
<p style="margin-top: 0px; margin-bottom: 0px;"></p>
<div>1#debug voice ccapi inout<br>
voip ccapi inout debugging is on</div>
<div><br>
</div>
<div>made test calls and then show log, I see below output.<br>
</div>
<p></p>
<p></p>
<p>1#show log<br>
Syslog logging: enabled (0 messages dropped, 37 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)</p>
<p>No Active Message Discriminator.</p>
<p><br>
</p>
<p>No Inactive Message Discriminator.</p>
<p><br>
Console logging: level debugging, 517 messages logged, xml disabled,<br>
filtering disabled<br>
Monitor logging: level debugging, 0 messages logged, xml disabled,<br>
filtering disabled<br>
Buffer logging: level debugging, 550 messages logged, xml disabled,<br>
filtering disabled<br>
Exception Logging: size (4096 bytes)<br>
Count and timestamp logging messages: disabled<br>
Persistent logging: disabled</p>
<p>No active filter modules.</p>
<p> Trap logging: level debugging, 620 message lines logged<br>
Logging to 10.0.7.139 (udp port 514, audit disabled,<br>
link up),<br>
435 message lines logged,<br>
0 message lines rate-limited,<br>
0 message lines dropped-by-MD,<br>
xml disabled, sequence number disabled<br>
filtering disabled<br>
Logging to 10.0.8.12 (udp port 514, audit disabled,<br>
link up),<br>
435 message lines logged,<br>
0 message lines rate-limited,<br>
0 message lines dropped-by-MD,<br>
xml disabled, sequence number disabled<br>
filtering disabled<br>
Logging Source-Interface: VRF Name:<br>
Loopback0<br>
</p>
<p></p>
<p><br>
</p>
<p>I don't see any calls activity.</p>
<p><br>
</p>
<p>thanks<br>
<br>
</p>
<div style="color: rgb(0, 0, 0);">
<hr style="width: 98%; display: inline-block;">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_m_6475442122256384463divRplyFwdMsg" dir="ltr">
<font color="#000000" face="Calibri, sans-serif" style="font-size: 11pt;"><b>From:</b> Anthony Holloway <<a id="LPlnk561808" href="mailto:avholloway%2Bcisco-voip@gmail.com" target="_blank" previewremoved="true">avholloway+cisco-voip@gmail.com</a>><br>
<b>Sent:</b> Wednesday, February 28, 2018 11:19 AM</font></div>
</div>
</div>
</div>
<div dir="ltr">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_m_6475442122256384463divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<div style="color: rgb(0, 0, 0);">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_m_6475442122256384463divRplyFwdMsg" dir="ltr">
<font color="#000000" face="Calibri, sans-serif" style="font-size: 11pt;"><br>
<b>To:</b> Hamu Ebiso<br>
<b>Cc:</b> cisco-voip voyp list<br>
<b>Subject:</b> Re: [cisco-voip] Need help configuring router for 911 with POTS Lines connected to FXO port on the router</font></div>
</div>
</div>
</div>
<div dir="ltr">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_m_6475442122256384463divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<div style="color: rgb(0, 0, 0);">
<div>
<div dir="ltr">But you didn't send all the information, because your output doesn't show the dial-peers.
<div><br>
</div>
<div>One method is to capture the output from "debug voip ccapi inout" and look for the following line "Outgoing Dial-peer="</div>
<div><br>
</div>
<div>You also didn't address the regions either. Can you send that too?</div>
</div>
<br>
<div class="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_m_6475442122256384463x_gmail_quote">
<div dir="ltr">On Wed, Feb 28, 2018 at 11:13 AM Hamu Ebiso <<a id="LPlnk901222" href="mailto:hebiso2010@hotmail.com" target="_blank" previewremoved="true">hebiso2010@hotmail.com</a>> wrote:<br>
</div>
<blockquote class="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_m_6475442122256384463x_gmail_quote" style="margin: 0px 0px 0px 0.8ex; padding-left: 1ex; border-left-color: rgb(204, 204, 204); border-left-width: 1px; border-left-style: solid;">
<div dir="ltr">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_m_6475442122256384463x_m_2219273772835208879divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<p style="margin-top: 0px; margin-bottom: 0px;">I was just trying to give you all the information so that you will be able to see the whole picture.</p>
<p style="margin-top: 0px; margin-bottom: 0px;">Regarding your questions, I don't know how to check that.<br>
</p>
<br>
<br>
<div style="color: rgb(0, 0, 0);">
<hr style="width: 98%; display: inline-block;">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_m_6475442122256384463x_m_2219273772835208879divRplyFwdMsg" dir="ltr">
<font color="#000000" face="Calibri, sans-serif" style="font-size: 11pt;"><b>From:</b> Anthony Holloway <<a id="LPlnk375648" href="mailto:avholloway%2Bcisco-voip@gmail.com" target="_blank" previewremoved="true">avholloway+cisco-voip@gmail.com</a>><br>
<b>Sent:</b> Wednesday, February 28, 2018 10:45 AM</font></div>
</div>
</div>
</div>
<div dir="ltr">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_m_6475442122256384463x_m_2219273772835208879divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<div style="color: rgb(0, 0, 0);">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_m_6475442122256384463x_m_2219273772835208879divRplyFwdMsg" dir="ltr">
<font color="#000000" face="Calibri, sans-serif" style="font-size: 11pt;"><br>
<b>To:</b> Hamu Ebiso<br>
<b>Cc:</b> cisco-voip voyp list<br>
<b>Subject:</b> Re: [cisco-voip] Need help configuring router for 911 with POTS Lines connected to FXO port on the router</font></div>
</div>
</div>
</div>
<div dir="ltr">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_m_6475442122256384463x_m_2219273772835208879divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<div style="color: rgb(0, 0, 0);">
<div>
<div dir="ltr">That's interesting that I asked for the dial-peer config, and you sent everything but.
<div><br>
</div>
<div>Do you know how to confirm which dial-peer the gateway is using?</div>
</div>
<br>
<div class="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_m_6475442122256384463x_m_2219273772835208879x_gmail_quote">
<div dir="ltr">On Wed, Feb 28, 2018 at 10:38 AM Hamu Ebiso <<a id="LPlnk268045" href="mailto:hebiso2010@hotmail.com" target="_blank" previewremoved="true">hebiso2010@hotmail.com</a>> wrote:<br>
</div>
<blockquote class="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_m_6475442122256384463x_m_2219273772835208879x_gmail_quote" style="margin: 0px 0px 0px 0.8ex; padding-left: 1ex; border-left-color: rgb(204, 204, 204); border-left-width: 1px; border-left-style: solid;">
<div dir="ltr">
<div id="x_m_-8988581562981479245x_m_-7869792497629053543x_m_935747933123784071x_m_3941368411824381705x_m_6475442122256384463x_m_2219273772835208879x_m_-8897566770194573471divtagdefaultwrapper" style="color: rgb(0, 0, 0); font-family: Calibri,Helvetica,sans-serif; font-size: 12pt;" dir="ltr">
<p style="margin-top: 0px; margin-bottom: 0px;">Below is gateway configuration</p>
<p style="margin-top: 0px; margin-bottom: 0px;"><br>
</p>
<p style="margin-top: 0px; margin-bottom: 0px;"><br>
</p>
<p style="margin-top: 0px; margin-bottom: 0px;"><br>
</p>
<p style="margin-top: 0px; margin-bottom: 0px;"></p>
<div>
<div>isdn switch-type primary-ni<br>
!<br>
!<br>
trunk group FXO_EM<br>
hunt-scheme sequential<br>
translation-profile incoming Incoming<br>
!<br>
!<br>
trunk group Local<br>
hunt-scheme sequential<br>
translation-profile outgoing outbound<br>
!<br>
!<br>
trunk group LD<br>
translation-profile outgoing outbound<br>
!<br>
voice-card 0<br>
dspfarm<br>
dsp services dspfarm<br>
!<br>
!<br>
voice call send-alert<br>
voice rtp send-recv<br>
!<br>
voice service voip<br>
ip address trusted list<br>
ipv4 10.170.99.12<br>
ipv4 10.44.50.14<br>
ipv4 10.44.50.39<br>
no ip address trusted authenticate<br>
clid substitute name<br>
clid network-provided<br>
allow-connections h323 to h323<br>
allow-connections h323 to sip<br>
allow-connections sip to h323<br>
allow-connections sip to sip<br>
redirect ip2ip<br>
signaling forward unconditional<br>
fax protocol t38 nse force version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw<br>
no fax-relay sg3-to-g3<br>
modem passthrough nse codec g711ulaw<br>
sip<br>
bind control source-interface Loopback0<br>
bind media source-interface Loopback0<br>
session transport tcp<br>
min-se 360 session-expires 360<br>
ds0-num<br>
header-passing<br>
error-passthru<br>
registrar server expires max 600 min 60<br>
early-offer forced<br>
midcall-signaling passthru<br>
no call service stop<br>
!<br>
!<br>
voice class uri 10 sip<br>
host ipv4:10.x.x.x<br>
host ipv4:10..x.x.x<br>
host ipv4:10..x.x.x<br>
voice class codec 1<br>
codec preference 1 g711ulaw<br>
codec preference 2 g729r8<br>
!<br>
voice class codec 2<br>
codec preference 1 g711ulaw<br>
!<br>
!<br>
!<br>
!<br>
voice translation-rule 1<br>
rule 1 /^208343\(....\)$/ /1208343\1/<br>
!<br>
voice translation-rule 9<br>
rule 1 /5.../ /1208343\0/<br>
!<br>
voice translation-rule 10<br>
rule 1 /^911/ /911/<br>
rule 2 /^9911/ /911/<br>
!<br>
voice translation-rule 15<br>
!<br>
voice translation-rule 30<br>
rule 1 /^911/ /911/<br>
rule 2 /^9911/ /911/<br>
rule 4 /^9\(011.*\)/ /\1/<br>
rule 9 /^9\(.*\)/ /\1/<br>
!<br>
!<br>
voice translation-profile Add1<br>
translate calling 91<br>
translate called 1<br>
!<br>
voice translation-profile Inbound<br>
translate called 1<br>
!<br>
voice translation-profile Strip9<br>
translate called 10<br>
!<br>
voice translation-profile block_profile<br>
translate calling 15<br>
!<br>
voice translation-profile outbound<br>
translate calling 10<br>
!<br>
!<br>
crypto pki token default removal timeout 0<br>
!<br>
!<br>
!<br>
!<br>
license udi pid CISCO3845-MB sn FOC123128X5<br>
license accept end user agreement<br>
archive<br>
log config<br>
hidekeys<br>
username admin privilege 15 password 7 105D1F0C<br>
username svuntbd privilege 15 secret 5 $1$vRxN$nu4JPZttcuPskPHoSdQZx.<br>
!<br>
!<br>
controller T1 0/0/0<br>
shutdown<br>
cablelength long 0db<br>
!<br>
controller T1 0/1/0<br>
shutdown<br>
cablelength long 0db<br>
!<br>
!<br>
!<br>
!<br>
!<br>
!<br>
interface Loopback0<br>
ip address 10.x.x.x 255.255.255.128<br>
!<br>
interface GigabitEthernet0/0<br>
description uplink to Lan1<br>
ip address 10.x.x.x 255.255.255.252<br>
duplex auto<br>
speed auto<br>
media-type rj45<br>
!<br>
interface GigabitEthernet0/1<br>
description uplink to Lan2<br>
ip address 10.x.x.x 255.255.255.252<br>
duplex auto<br>
speed auto<br>
media-type rj45<br>
!<br>
router ospf 1<br>
auto-cost reference-bandwidth 10000<br>
network 10.0.0.0 0.0.255.255 area 10.0.0.0<br>
!<br>
ip forward-protocol nd<br>
!<br>
!<br>
no ip http server<br>
no ip http secure-server<br>
!</div>
<div><br>
</div>
<div><br>
</div>
</div>
<p></p>
</div>
</div>
</blockquote>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</div>
</div>
</div>
</div>
</div>
</body>
</html>