<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=utf-8" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.23588"></HEAD>
<BODY dir=auto bgColor=#ffffff>
<DIV><FONT size=2 face=Arial>Hi</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>I have tried several configurations</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Here is the relevent par of the actual
config</FONT></DIV>
<DIV><FONT size=2 face=Arial><BR>version 15.3<BR>boot system flash
bootflash:asr1000rp2-adventerprisek9.03.10.07.S.153-3.S7-ext.bin<BR>!<BR>card
type t1 0 2<BR>!<BR>multilink bundle-name authenticated<BR>isdn switch-type
primary-5ess<BR>!<BR>voice-card 0/0<BR>!<BR>voice service
pots<BR> supported-language FR<BR>!<BR>voice service voip<BR> clid
network-provided<BR> allow-connections h323 to
sip<BR> allow-connections sip to h323<BR> allow-connections sip to
sip<BR> signaling forward unconditional<BR> sip<BR> bind control
source-interface GigabitEthernet1/2/0<BR> bind media source-interface
GigabitEthernet1/2/0<BR> ds0-num<BR> header-passing<BR>
privacy id<BR> outbound-proxy ipv4:172.16.x.y<BR>!<BR>voice class codec
1<BR> codec preference 1 g711ulaw<BR>!<BR>controller T1
0/2/0<BR> framing esf<BR> clock source internal<BR> linecode
b8zs<BR> cablelength long 0db<BR> pri-group timeslots
1-24<BR>!<BR>interface Service-Engine0/0/0<BR>!<BR>interface
Serial0/2/0:23<BR> encapsulation hdlc<BR> isdn switch-type
primary-5ess<BR> isdn negotiate-bchan<BR>!<BR>map-class dialer
DOVtest<BR> dialer voice-call<BR>!<BR>dspfarm profile 1 transcode
universal <BR> rsvp<BR> shutdown<BR>!<BR>dial-peer voice 1
voip<BR> destination-pattern *.<BR> signaling forward
unconditional<BR> session protocol sipv2<BR> session target
sip-server<BR> voice-class codec 1 <BR>!<BR>dial-peer voice 2
pots<BR> destination-pattern xxxxxxx<BR> incoming called-number
xxxxxxx<BR> direct-inward-dial<BR>!<BR>!<BR>sip-ua <BR> credentials
username asr1006 password 7 xxxxxxxx realm yyyyy<BR> retry invite
3<BR> retry bye 3<BR> retry cancel 3<BR> timers trying
1000<BR> timers register 100<BR> sip-server
ipv4:172.16.x.y<BR>!<BR>!</DIV>
<DIV>Pat</DIV>
<DIV></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px"
dir=ltr>
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B>
<A title=ryanhuff@outlook.com href="mailto:ryanhuff@outlook.com">Ryan Huff</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=pfortin@royaume.com
href="mailto:pfortin@royaume.com">Patrick Fortin</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Cc:</B> <A title=cisco-voip@puck.nether.net
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, May 04, 2018 11:43 AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [cisco-voip] ISDN T1 voice
calls hardware validation</DIV>
<DIV><BR></DIV>I assume you have the card type specified and controller
interface configured with timeslots?
<DIV><BR></DIV>
<DIV>Can you send the running-config and code version?<BR><BR>
<DIV id=AppleMailSignature>Sent from my iPhone</DIV>
<DIV><BR>On May 4, 2018, at 11:35, Patrick Fortin <<A
href="mailto:pfortin@royaume.com">pfortin@royaume.com</A>>
wrote:<BR><BR></DIV>
<BLOCKQUOTE type="cite">
<DIV>
<META name=GENERATOR content="MSHTML 8.00.6001.23588">
<DIV><FONT size=2 face=Arial>Hi</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>I get this error</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial> **ERROR**: call_incoming: Received a call
id 0x2F with a bad bearercap from xxxxxxxxxx on b channel
1</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>seems like the dsp are not associated with the
t1 card</FONT></DIV>
<DIV><FONT size=2 face=Arial><BR>in the config we don't have acces to the
following :</FONT></DIV><FONT size=2 face=Arial></FONT>
<DIV><FONT size=2 face=Arial>
<P>isdn incoming-voice voice<BR>which should go on the Serial interface.
<BR><BR>we also don't have the "port" command that should go in the
dial-peer voice section</P></FONT></DIV>
<DIV><FONT size=2 face=Arial>any ideas ?</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Thanks</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Pat</FONT></DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px"
dir=ltr>
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B>
<A title=ryanhuff@outlook.com href="mailto:ryanhuff@outlook.com">Ryan
Huff</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=pucknether@foril.com
href="mailto:pucknether@foril.com">PF</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Cc:</B> <A
title=cisco-voip@puck.nether.net
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, May 04, 2018 11:11
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [cisco-voip] ISDN T1
voice calls hardware validation</DIV>
<DIV><BR></DIV>That correct! I misread! Yeah the shared port adapter T1
should work.
<DIV><BR><BR>
<DIV id=AppleMailSignature>Sent from my iPhone</DIV>
<DIV><BR>On May 4, 2018, at 10:36, PF <<A
href="mailto:pucknether@foril.com">pucknether@foril.com</A>>
wrote:<BR><BR></DIV>
<BLOCKQUOTE type="cite">
<DIV>
<META name=GENERATOR content="MSHTML 8.00.6001.23588">
<DIV><FONT size=2 face=Arial>Hi</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Thanks for your help</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>But there are no NIM slot in the ASR1006
chassis</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>NIM is for ASR1001-X I think</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Pat</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px"
dir=ltr>
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B>
<A title=ryanhuff@outlook.com href="mailto:ryanhuff@outlook.com">Ryan
Huff</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=pucknether@foril.com
href="mailto:pucknether@foril.com">PF</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Cc:</B> <A
title=cisco-voip@puck.nether.net
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, May 04, 2018 9:56
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [cisco-voip] ISDN T1
voice calls hardware validation</DIV>
<DIV><BR></DIV>For isdn voice you’ll need a NIM-8MFT-T1/E1<BR><BR>
<DIV id=AppleMailSignature>Sent from my iPhone</DIV>
<DIV><BR>On May 4, 2018, at 09:31, PF <<A
href="mailto:pucknether@foril.com">pucknether@foril.com</A>>
wrote:<BR><BR></DIV>
<BLOCKQUOTE type="cite">
<DIV>
<META name=GENERATOR content="MSHTML 8.00.6001.23588">
<STYLE></STYLE>
<DIV><FONT size=2 face=Arial>
<DIV>Hi</DIV>
<DIV>
<P>Can someone help us validate if we can use this hardware to
receive voice calls from a isdn T1 (23B+D) and send them in SIP to a
softswitch and vice-versa</P>
<P>ASR1006<BR>SPA-8XCHT1/E1<BR>SPA-DSP<BR>ASR1000-RP2<BR>ASR1000-ESP40</P>
<P>in short can it be used to build a voip gateway like an audiocode
mediant or a patton smartnode</P>
<P>Thanks</P>
<P>Pat</P></DIV></FONT></DIV></DIV></BLOCKQUOTE>
<BLOCKQUOTE type="cite">
<DIV><SPAN>_______________________________________________</SPAN><BR><SPAN>cisco-voip
mailing list</SPAN><BR><SPAN><A
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A></SPAN><BR><SPAN><A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A></SPAN><BR></DIV></BLOCKQUOTE></BLOCKQUOTE></DIV></BLOCKQUOTE></DIV></BLOCKQUOTE></DIV></BLOCKQUOTE></DIV></BLOCKQUOTE></BODY></HTML>