<div dir="ltr"><div>IMP 12.0 on-prem with Jabber for Windows 12.0 (But I think this would apply to most all current releases of IMP/Jabber)</div><div><br></div><div>Using only UDS directory with LDAP sync on back end. LDAP directory is mapping <i>telephoneNumber</i> to <i>Phone Number</i> and <i>mail</i> to <i>Directory URI</i></div><div><br></div><div>The client seems to default to using the Phone Number as the default selection for the green-button click-to-dial function. I have a need to make this default to the SIP URI.</div><div><br></div><div>I've checked over the parameters available here</div><div><br></div><div><a href="https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/12_0/cjab_b_parameters-reference-guide-for-cisco_12.html">https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/12_0/cjab_b_parameters-reference-guide-for-cisco_12.html</a></div><div><br></div><div>but not finding anything in the XML parameters that would seem to influence this.</div><div><br></div><div>I can successfully click-to-dial either the Phone Number or the SIP URI. I need to make the SIP URI be the *default* for click-to-dial.</div><div><br></div><div>Tested with both a client configured with only a softphone, and client configured for only desk phone control.  No impact on the order.  Always selects SIP URI first.</div><div><br></div><div>I'm in a UC migration situation and the <i>Phone Number</i> for users (imported from LDAP) may not be accurate (not reachable) during the migration, but the SIP URI will be accurate and reachable. Trying to not have to instruct users select the SIP URI manually when dialing from Jabber<br></div><div><br></div><div>Screen capture to illustrate what I'm trying to do.</div><div><div><img src="cid:ii_jjr9ku4j0_164adf1cb3255d8a" width="511" height="511"><br></div><br></div></div>