<div dir="ltr">It just has to be unique, the association comes from the End User device association as well as the Owner User ID. Anthony has it correct.</div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Sep 13, 2019 at 12:41 PM Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca">lelio@uoguelph.ca</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div lang="EN-US">
<div class="gmail-m_-2940001130483822694WordSection1">
<p class="MsoNormal">Ok. Hold on. Are you sure? I did mean userID. As a Cisco requirement. Not company standard.<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">I’m almost 100% positive I read in the deployment guide it needs to be the userID. And it was the Jabber deployment guide. Which, of course, I didn’t save.
<span style="font-family:"Segoe UI Emoji",sans-serif">😉</span><u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">When asking about it, I was told, it was really the only way you could get a Jabber device to associate with a user after logon. How else would you?<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">I mean, there’s nothing else I think I’d really want to use, but, honestly, I believe(d) it’s a requirement.<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Lelio<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif">---<u></u><u></u></span></p>
<p class="MsoNormal"><b><span style="font-family:Arial,sans-serif">Lelio Fulgenzi, B.A.</span></b><span style="font-family:Arial,sans-serif"> | Senior Analyst<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif;color:rgb(51,51,51)">Computing and Communications Services</span><span style="font-family:Arial,sans-serif"> | University of Guelph<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif">Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif">519-824-4120 Ext. 56354 |
<a href="mailto:lelio@uoguelph.ca" target="_blank"><span style="color:rgb(5,99,193)">lelio@uoguelph.ca</span></a><u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif"><u></u> <u></u></span></p>
<p class="MsoNormal"><a href="http://www.uoguelph.ca/ccs" target="_blank"><span style="font-family:Arial,sans-serif">www.uoguelph.ca/ccs</span></a><span style="font-family:Arial,sans-serif;color:rgb(31,73,125)"> | @UofGCCS on Instagram, Twitter and Facebook<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif"><u></u> <u></u></span></p>
<p class="MsoNormal"><img border="0" width="187" height="100" style="width: 1.9479in; height: 1.0416in;" id="gmail-m_-2940001130483822694Picture_x0020_1" src="cid:16d2bbad3dd4cff311" alt="University of Guelph Cornerstone with Improve Life tagline"><u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><b>From:</b> Anthony Holloway <<a href="mailto:avholloway%2Bcisco-voip@gmail.com" target="_blank">avholloway+cisco-voip@gmail.com</a>>
<br>
<b>Sent:</b> Friday, September 13, 2019 12:40 PM<br>
<b>To:</b> Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>><br>
<b>Cc:</b> Brian Meade <<a href="mailto:bmeade90@vt.edu" target="_blank">bmeade90@vt.edu</a>>; cisco-voip voyp list <<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>><br>
<b>Subject:</b> Re: [cisco-voip] Bulk Admin and Jabber<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<p class="MsoNormal">"... when we know the device name for the softphones needs to be the userID"<u></u><u></u></p>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<div>
<p class="MsoNormal">Just to be clear, it does not. That was an old CUPC requirement, and the new requirements are as follows:<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<div>
<p class="MsoNormal">CSF = could be whatever you want, e.g., banana (unless you have QM call recording, then it needs to be all caps CSFSOMETHING for QM)<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">TCT = must be all caps TCTSOMETHING<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">BOT = must be all caps BOTSOMETHING <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">TAB = must be all caps TABSOMETHING<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<div>
<p class="MsoNormal">None of them however, need the User ID in the name. Could be TCTBANANA for example.<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<div>
<p class="MsoNormal">Maybe that's not what you meant. Maybe you meant, for your company's standard build, but I thought I'd address that, since other people might have read that it needed to be that way.<u></u><u></u></p>
</div>
</div>
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<div>
<p class="MsoNormal">On Fri, Sep 13, 2019 at 10:25 AM Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>> wrote:<u></u><u></u></p>
</div>
<blockquote style="border-top:none;border-right:none;border-bottom:none;border-left:1pt solid rgb(204,204,204);padding:0in 0in 0in 6pt;margin-left:4.8pt;margin-right:0in">
<div>
<div>
<p class="MsoNormal">This looks like an interesting option. I’ll have to see how much effort it takes to get the templates set up in order for us to use this.
<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">I didn’t like the fact that it’s asking me to fill in the device name, when we know the device name for the softphones needs to be the userID. So this is a step that could lead
to errors and extra effort. <u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">I know this sounds like _<i>I</i>_ don’t want to do this stuff, but when you’re preparing instructions for a group of people with varying skill sets, the less work required the
better. <u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">At least we have some options.<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif">---</span><u></u><u></u></p>
<p class="MsoNormal"><b><span style="font-family:Arial,sans-serif">Lelio Fulgenzi, B.A.</span></b><span style="font-family:Arial,sans-serif"> | Senior Analyst</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif;color:rgb(51,51,51)">Computing and Communications Services</span><span style="font-family:Arial,sans-serif"> | University of Guelph</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif">Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif">519-824-4120 Ext. 56354 |
<a href="mailto:lelio@uoguelph.ca" target="_blank"><span style="color:rgb(5,99,193)">lelio@uoguelph.ca</span></a></span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif"> </span><u></u><u></u></p>
<p class="MsoNormal"><a href="http://www.uoguelph.ca/ccs" target="_blank"><span style="font-family:Arial,sans-serif">www.uoguelph.ca/ccs</span></a><span style="font-family:Arial,sans-serif;color:rgb(31,73,125)">
| @UofGCCS on Instagram, Twitter and Facebook</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif"> </span><u></u><u></u></p>
<p class="MsoNormal"><img border="0" width="187" height="100" style="width: 1.9479in; height: 1.0416in;" id="gmail-m_-2940001130483822694gmail-m_-7925973857289877766Picture_x0020_1" src="cid:16d2bbad3dd4cff311" alt="University of Guelph Cornerstone with Improve Life tagline"><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal"><b>From:</b> Brian Meade <<a href="mailto:bmeade90@vt.edu" target="_blank">bmeade90@vt.edu</a>>
<br>
<b>Sent:</b> Friday, September 13, 2019 11:02 AM<br>
<b>To:</b> Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>><br>
<b>Cc:</b> Anthony Holloway <<a href="mailto:avholloway%2Bcisco-voip@gmail.com" target="_blank">avholloway+cisco-voip@gmail.com</a>>; cisco-voip voyp list <<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>><br>
<b>Subject:</b> Re: [cisco-voip] Bulk Admin and Jabber<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<div>
<p class="MsoNormal">Have you tried using the Quick/User Phone Add? That works pretty well. Just assign device/line templates to user profiles and adding a CSF/TCT/RDP/Deskphone/TAB/BOT device for
a user takes all of a minute at most.<u></u><u></u></p>
</div>
<p class="MsoNormal"> <u></u><u></u></p>
<div>
<div>
<p class="MsoNormal">On Fri, Sep 13, 2019 at 10:42 AM Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>> wrote:<u></u><u></u></p>
</div>
<blockquote style="border-top:none;border-right:none;border-bottom:none;border-left:1pt solid rgb(204,204,204);padding:0in 0in 0in 6pt;margin:5pt 0in 5pt 4.8pt">
<div>
<div>
<p class="MsoNormal">I guess it’s a combo of built-in tools and tools people are familiar with.
<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">I like the idea, but again, adding extra steps like that might not work. Now, that being said, I wonder if I can modify the order in which the columns are presented to the import
tool? If they allow headers, that should be ok, right?<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">I might be stuck with looking for green columns for the first round.
<span style="font-family:"Segoe UI Emoji",sans-serif">☹</span><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif">---</span><u></u><u></u></p>
<p class="MsoNormal"><b><span style="font-family:Arial,sans-serif">Lelio Fulgenzi, B.A.</span></b><span style="font-family:Arial,sans-serif"> | Senior Analyst</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif;color:rgb(51,51,51)">Computing and Communications Services</span><span style="font-family:Arial,sans-serif"> | University of Guelph</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif">Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif">519-824-4120 Ext. 56354 |
<a href="mailto:lelio@uoguelph.ca" target="_blank"><span style="color:rgb(5,99,193)">lelio@uoguelph.ca</span></a></span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif"> </span><u></u><u></u></p>
<p class="MsoNormal"><a href="http://www.uoguelph.ca/ccs" target="_blank"><span style="font-family:Arial,sans-serif">www.uoguelph.ca/ccs</span></a><span style="font-family:Arial,sans-serif;color:rgb(31,73,125)">
| @UofGCCS on Instagram, Twitter and Facebook</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:Arial,sans-serif"> </span><u></u><u></u></p>
<p class="MsoNormal"><img border="0" width="187" height="100" style="width: 1.9479in; height: 1.0416in;" id="gmail-m_-2940001130483822694gmail-m_-7925973857289877766gmail-m_4924600365179192438Picture_x0020_1" src="cid:16d2bbad3dd4cff311" alt="University of Guelph Cornerstone with Improve Life tagline"><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal"><b>From:</b> Anthony Holloway <<a href="mailto:avholloway%2Bcisco-voip@gmail.com" target="_blank">avholloway+cisco-voip@gmail.com</a>>
<br>
<b>Sent:</b> Friday, September 13, 2019 10:31 AM<br>
<b>To:</b> Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>><br>
<b>Cc:</b> cisco-voip voyp list <<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>><br>
<b>Subject:</b> Re: [cisco-voip] Bulk Admin and Jabber<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<div>
<div>
<p class="MsoNormal">"...I need to use the built-in tools..."<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">So, Excel + BAT is built-in, and Python + AXL is not?<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">I kid, I kid. I get that there's a common familiarity with Excel and not one with Python.<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">I have a recommendation when working with BAT import files in Excel. Insert a few input columns to the left of the actual data, and then drive your entire spreadsheet with formulas.
This will save you from having to constantly scroll left and right look for cells you need to fill in. You will have to exclude them when you export/save as csv. However, keeping the input columns together on the left should make this very easy. You can
duplicate the sheet and delete them, you can have two different files: XLSX and CSV, you can copy and paste into Notepad++ and CTRL+H replace tabs (\t) with commas (,). There's a few options there. Anyway, I find it much nicer to input the data this way.
I hope it helps you too.<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">Do this:<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<div>
<p class="MsoNormal"><img border="0" width="414" height="153" style="width: 4.3125in; height: 1.5937in;" id="gmail-m_-2940001130483822694gmail-m_-7925973857289877766gmail-m_4924600365179192438_x005f_x0000_i1025" src="cid:16d2bbad3de5b16b22" alt="image.png"><u></u><u></u></p>
</div>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">Not this:<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<div>
<p class="MsoNormal"><img border="0" width="415" height="153" style="width: 4.3229in; height: 1.5937in;" id="gmail-m_-2940001130483822694gmail-m_-7925973857289877766gmail-m_4924600365179192438_x005f_x0000_i1026" src="cid:16d2bbad3de692e333" alt="image.png"><u></u><u></u></p>
</div>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
</div>
<p class="MsoNormal"> <u></u><u></u></p>
<div>
<div>
<p class="MsoNormal">On Thu, Sep 12, 2019 at 7:24 PM Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>> wrote:<u></u><u></u></p>
</div>
<blockquote style="border-top:none;border-right:none;border-bottom:none;border-left:1pt solid rgb(204,204,204);padding:0in 0in 0in 6pt;margin:5pt 0in 5pt 4.8pt">
<div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<p class="MsoNormal">We really need to start to minimize the amount of custom scripts / programming that we use, not increase it.
<u></u><u></u></p>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">It’s a bit of a long story.<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">So I need to use the built-in tools. <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">:(<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">We might just stick with super copy if bulk admin doesn’t work out. <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal" style="margin-bottom:12pt">Lelio<u></u><u></u></p>
<div id="gmail-m_-2940001130483822694gmail-m_-7925973857289877766gmail-m_4924600365179192438gmail-m_-7390551623601903521AppleMailSignature">
<p class="MsoNormal"><i>-sent from mobile device-</i><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal"><b>Lelio Fulgenzi, B.A.</b> | Senior Analyst<u></u><u></u></p>
<p class="MsoNormal">Computing and Communications Services | University of Guelph<u></u><u></u></p>
<p class="MsoNormal">Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1<u></u><u></u></p>
<p class="MsoNormal"><span style="color:black"><a href="tel:519-824-4120;56354" target="_blank">519-824-4120 Ext. 56354</a> | <a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a></span><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal"><span style="color:black"><a href="http://www.uoguelph.ca/ccs" target="_blank">www.uoguelph.ca/ccs</a> | @UofGCCS on Instagram, Twitter and Facebook</span><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal" style="margin-bottom:12pt"><br>
On Sep 12, 2019, at 7:48 PM, Anthony Holloway <<a href="mailto:avholloway+cisco-voip@gmail.com" target="_blank">avholloway+cisco-voip@gmail.com</a>> wrote:<u></u><u></u></p>
</div>
<blockquote style="margin-top:5pt;margin-bottom:5pt">
<div>
<div>
<p class="MsoNormal">Why not roll your own build tool in Python? You can ask questions here, as lots of us have Python and AXL experience, and then more people get to benefit from the collaboration.
<u></u><u></u></p>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">Just think how cool it would be to build your very own Jarvis:<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<div>
<p class="MsoNormal"><image.png><u></u><u></u></p>
</div>
</div>
</div>
<p class="MsoNormal"> <u></u><u></u></p>
<div>
<div>
<p class="MsoNormal">On Thu, Sep 12, 2019 at 5:22 PM Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>> wrote:<u></u><u></u></p>
</div>
<blockquote style="border-top:none;border-right:none;border-bottom:none;border-left:1pt solid rgb(204,204,204);padding:0in 0in 0in 6pt;margin:5pt 0in 5pt 4.8pt">
<div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<p class="MsoNormal">It’s been a while since I’ve used Bulk Admin Tool.
<u></u><u></u></p>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">Wondering how it might help with our Jabber deployment. <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">I’m thinking, since our requests will come in one at a time, the best approach would be to create a BAT file that has a line for each device type. We’ve decided to load all types
so users can switch devices out/in as they wish. <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">Can you bulk load _without_ using a template?<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">What have others done with respect to Jabber bulk loads?<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal" style="margin-bottom:12pt">Lelio<u></u><u></u></p>
<div id="gmail-m_-2940001130483822694gmail-m_-7925973857289877766gmail-m_4924600365179192438gmail-m_-7390551623601903521gmail-m_8094507578130393277AppleMailSignature">
<p class="MsoNormal"><i>-sent from mobile device-</i><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal"><b>Lelio Fulgenzi, B.A.</b> | Senior Analyst<u></u><u></u></p>
<p class="MsoNormal">Computing and Communications Services | University of Guelph<u></u><u></u></p>
<p class="MsoNormal">Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1<u></u><u></u></p>
<p class="MsoNormal"><span style="color:black"><a href="tel:519-824-4120;56354" target="_blank">519-824-4120 Ext. 56354</a> | <a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a></span><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal"><span style="color:black"><a href="http://www.uoguelph.ca/ccs" target="_blank">www.uoguelph.ca/ccs</a> | @UofGCCS on Instagram, Twitter and Facebook</span><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
</div>
</div>
<p class="MsoNormal">_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><u></u><u></u></p>
</blockquote>
</div>
</div>
</blockquote>
</div>
</div>
</blockquote>
</div>
</div>
</div>
<p class="MsoNormal">_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><u></u><u></u></p>
</blockquote>
</div>
</div>
</div>
</blockquote>
</div>
</div>
</div>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" rel="noreferrer" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote></div>