<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body dir="auto">
<div><br>
</div>
That would be great.
<div><br>
</div>
<div>We’re concerned with out of the box 8851s. No side cars. Maybe add a few watts for USB powering of devices. </div>
<div><br>
</div>
<div>We understand that they may request 30w on power up, then revert down to ~15w. Which means phones may not all come up at once if our power supplies are not sufficient. </div>
<div><br>
</div>
<div>But as long as there’s sufficient normal operating power, we should be good. </div>
<div><br>
</div>
<div>Complicating factor is we have APs to contend with as well. They’re sucking power, too!</div>
<div><br>
</div>
<div>Thanks again. </div>
<div><br>
<div id="AppleMailSignature" dir="ltr">Sent from my iPhone</div>
<div dir="ltr"><br>
On Feb 6, 2020, at 6:57 PM, Pawlowski, Adam <<a href="mailto:ajp26@buffalo.edu">ajp26@buffalo.edu</a>> wrote:<br>
<br>
</div>
<blockquote type="cite">
<div dir="ltr">
<p>Sure, I can do that for you in the morning.</p>
<p><br>
</p>
<p>Check the datasheet on the KEM as well - those draw different power. The A-KEM is supported with 1 per, BEKEM with 2 (big easy is BE, code name for the model).</p>
<p><br>
</p>
<p>If you're running gear with a low budget, "show power inline <interface> detail" tells you what it's actually drawn, in case you need to dip into manual policing. The LLDP-MED/CDP power request values can be higher than what it really needs.<br>
</p>
<div style="color: rgb(33, 33, 33);">
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="divRplyFwdMsg" dir="ltr"><font style="font-size:11pt" face="Calibri, sans-serif" color="#000000"><b>From:</b> cisco-voip <<a href="mailto:cisco-voip-bounces@puck.nether.net">cisco-voip-bounces@puck.nether.net</a>> on behalf of Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca">lelio@uoguelph.ca</a>><br>
<b>Sent:</b> Thursday, February 6, 2020 6:11 PM<br>
<b>To:</b> voyp list, cisco-voip (<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>)<br>
<b>Subject:</b> [cisco-voip] 8851 - power draw</font>
<div> </div>
</div>
<div>
<div class="WordSection1">
<p class="MsoNormal"> </p>
<p class="MsoNormal">Does anyone have a bunch of 8851s deployed? Can I trouble you for a “show inline power” output? I’m looking for what normal operating power draw is for this model. No side cars, no USB, sort of thing.</p>
<p class="MsoNormal"> </p>
<p class="MsoNormal">I’ve got an 8865 showing 12.9W, and I’m hoping it’s less. We’re looking at selecting 8841 or 8851 and power draw is a concern. Startup too, but apparently, startup will cycle through.</p>
<p class="MsoNormal"> </p>
<p class="MsoNormal">Lelio</p>
<p class="MsoNormal"> </p>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</body>
</html>