<div dir="ltr">You can dial any 9-digit meeting number now like <a href="mailto:123456789@webex.com">123456789@webex.com</a>. Webex changed to make these non-site specific. So it's easy to make an Extron/Crestron interface to enter a 9-digit meeting number than have it just add @<a href="http://webex.com">webex.com</a> and dial.<br><div><br></div><div>The other thing you can do is just have a button for <a href="mailto:meet@webex.com">meet@webex.com</a> which prompts you to enter the 9-digit meeting number via DTMF.</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Feb 18, 2020 at 4:12 PM JASON BURWELL via cisco-voip <<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div lang="EN-US">
<div class="gmail-m_5318821337810835687WordSection1">
<p class="MsoNormal">I noticed with CE9.10 they have now added a “Join Webex” button that appears on the Touch 10 home screen that allows direct calling to a webex meeting without dialing the entire URI. This is a great feature but now I’m trying to figure
out if anyone is having luck integrating this Quick connect to webex meeting feature in to room systems that are Crestron controlled and do not have a Touch 10 present. Sure would be nice to be able to be able to have this functionality from the Crestron control
as well. My A/V vendor says they “are working on it” so it could be a while. Anyone had luck with this?<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Thanks Jason<u></u><u></u></p>
</div>
</div>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" rel="noreferrer" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote></div>