<div><div dir="auto">If you can do a tcpdump between expressway and call manager you will see a 404 and it would verify that. We didn’t see it on Jabber because we just hadn’t tried it - only needed multiple lines on hard phones. </div></div><div dir="auto"><br></div><div dir="auto">Or you can just change the setting on expressway, reregister Jabber, and hope for the best. Depends on what kind of lifestyle you subscribe to, I suppose. </div><div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, Mar 30, 2020 at 13:01 Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca">lelio@uoguelph.ca</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div lang="EN-US" link="blue" vlink="purple">
<div class="m_-5844603661381964752WordSection1">
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">Um, ok. I just got a call from someone saying secondary lines are not working on Jabber desktop via MRA.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">I was under the impression from our discussion below that this only affects the 8800?<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">But it affects Jabber too?<u></u><u></u></span></p></div></div><div lang="EN-US" link="blue" vlink="purple"><div class="m_-5844603661381964752WordSection1">
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif"><u></u> <u></u></span></p>
<div>
<div style="border:none;border-top:solid #e1e1e1 1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif"> Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>>
<br>
<b>Sent:</b> Monday, March 23, 2020 9:52 PM<br>
<b>To:</b> Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>>; Wakelin, Frank <<a href="mailto:FWakelin@richmond.ca" target="_blank">FWakelin@richmond.ca</a>><br>
<b>Cc:</b> voyp list, cisco-voip <<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>><br>
<b>Subject:</b> RE: [cisco-voip] CCX phone agent over MRA?<u></u><u></u></span></p>
</div>
</div>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">Yeah. It exists! (on
<b>8.</b>10) <u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif"><u></u> <u></u></span></p>
<div>
<div style="border:none;border-top:solid #e1e1e1 1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif"> cisco-voip <<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>>
<b>On Behalf Of </b>Lelio Fulgenzi<br>
<b>Sent:</b> Monday, March 23, 2020 9:41 PM<br>
<b>To:</b> Wakelin, Frank <<a href="mailto:FWakelin@richmond.ca" target="_blank">FWakelin@richmond.ca</a>><br>
<b>Cc:</b> voyp list, cisco-voip <<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>><br>
<b>Subject:</b> Re: [cisco-voip] CCX phone agent over MRA?<u></u><u></u></span></p>
</div>
</div>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Wow. Interesting. Will have to read the X10.4 (*cough*) guide to see if a similar feature exists.
<span style="font-size:11.0pt"><u></u><u></u></span></p>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt">Thanks for this. <u></u><u></u></p>
<div id="m_-5844603661381964752AppleMailSignature">
<p class="MsoNormal">Sent from my iPhone<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><br>
On Mar 23, 2020, at 9:29 PM, Wakelin, Frank <<a href="mailto:FWakelin@richmond.ca" target="_blank">FWakelin@richmond.ca</a>> wrote:<u></u><u></u></p>
</div>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Absolutely, here’s what Aman sent me:</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal" style="margin-left:.5in">Anther thing of note is use of <b><u>SIP Path header</u></b> on Expressway C. This may be needed to turned on if you multiple lines on 88xx phone. I have seen an issue when were we not able to ring second line on
the phone when this was turned off on Expressway C.<u></u><u></u></p>
<p class="MsoNormal" style="margin-left:.5in"> <u></u><u></u></p>
<p class="MsoNormal" style="margin-left:.5in">You will need that turned up on Expressway C under unified communication - configuration.<u></u><u></u></p>
<p class="MsoNormal" style="margin-left:.5in"> <u></u><u></u></p>
<p class="MsoNormal" style="margin-left:.5in">I ran into this in testing in my environment few days back.<u></u><u></u></p>
<p class="MsoNormal" style="margin-left:.5in"> <u></u><u></u></p>
<p class="MsoNormal" style="margin-left:.5in">There are certain version requirements to have this turned on with CUCM. Page 33<u></u><u></u></p>
<p class="MsoNormal" style="margin-left:.5in"> <u></u><u></u></p>
<p class="MsoNormal" style="margin-left:.5in"><a href="https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-11/Mobile-Remote-Access-via-Expressway-Deployment-Guide-X8-11-4.pdf" target="_blank">https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-11/Mobile-Remote-Access-via-Expressway-Deployment-Guide-X8-11-4.pdf</a> <u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">---</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Frank Wakelin – Senior Network Analyst</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Information Technology | City of Richmond
</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Office +16042764190</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Mobile +17788394693</span><u></u><u></u></p>
<p class="MsoNormal"><a href="mailto:fwakelin@richmond.ca" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#0563c1">fwakelin@richmond.ca</span></a><u></u><u></u></p>
</div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<div>
<div style="border:none;border-top:solid #e1e1e1 1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif"> Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>>
<br>
<b>Sent:</b> March 23, 2020 6:23 PM<br>
<b>To:</b> Wakelin, Frank <<a href="mailto:FWakelin@richmond.ca" target="_blank">FWakelin@richmond.ca</a>><br>
<b>Cc:</b> voyp list, cisco-voip <<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>><br>
<b>Subject:</b> Re: [cisco-voip] CCX phone agent over MRA?</span><u></u><u></u></p>
</div>
</div>
<p class="MsoNormal"> <u></u><u></u></p>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<p class="MsoNormal">Um, so, outside of ccx, getting multiline 8800s working over MRA requires extra config?
<u></u><u></u></p>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">Can you share any tech notes ?<u></u><u></u></p>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt"> <u></u><u></u></p>
<div id="m_-5844603661381964752AppleMailSignature">
<p class="MsoNormal">Sent from my iPhone<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><br>
On Mar 23, 2020, at 8:53 PM, Wakelin, Frank <<a href="mailto:FWakelin@richmond.ca" target="_blank">FWakelin@richmond.ca</a>> wrote:<u></u><u></u></p>
</div>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Yeah, once again as it turns out it was the Cisco TAC engineer not really knowing the product they are apparently supporting – which is fine, but they also never
escalated the call to someone who does when the question was over their head either. – heavy sigh –
</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">As it turns out we generally configure all of our agents contact centre lines as their second line. After my post Aman reached out to me with a note about the
use of the <b>SIP Path header</b> on Expressway C as this is needed to support multiple lines on 88xx phone. The lack of multiline support was what was killing the call to the agent extension (on the second line of the phone) when it was presented by CCX.
I had a chance to enable the SIP path header today and successfully tested CCX.</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">So thanks all for your assistance and more so your insistence that this is supported/working in your environments. Thanks Aman for the mention of the SIP path
header!</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">---</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Frank Wakelin – Senior Network Analyst</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Information Technology | City of Richmond
</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Office +16042764190</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Mobile +17788394693</span><u></u><u></u></p>
<p class="MsoNormal"><a href="mailto:fwakelin@richmond.ca" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#0563c1">fwakelin@richmond.ca</span></a><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif"> cisco-voip <</span><a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">cisco-voip-bounces@puck.nether.net</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">>
<b>On Behalf Of </b>Anthony Holloway<br>
<b>Sent:</b> March 23, 2020 5:02 PM<br>
<b>To:</b> NateCCIE <</span><a href="mailto:nateccie@gmail.com" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">nateccie@gmail.com</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">><br>
<b>Cc:</b> voyp list, cisco-voip <</span><a href="mailto:cisco-voip@puck.nether.net" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">cisco-voip@puck.nether.net</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">><br>
<b>Subject:</b> Re: [cisco-voip] CCX phone agent over MRA?</span><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<div>
<p class="MsoNormal">Yep, remote control via SIP from CUCM.<u></u><u></u></p>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">I just tried this again but on a CUCM 11.5, UCCX 12.0 and Expressway X12.5.5.<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">I pulled the traces off of two phones: one on-prem, one MRA, and the messages were the same.<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">This was Finesse telling the phone (Agent ext 2000) to answer a call, and thus CUCM using out of dialog REFER containing remote call control commands to answer the call.<u></u><u></u></p>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><span style="font-family:"Courier New"">REFER </span><a><span style="font-family:"Courier New"">sip:e367249a-d9c8-4fbc-8f79-33b3e1be127f@10.1.75.44:50868;transport=tcp</span></a><span style="font-family:"Courier New"">
SIP/2.0^M<br>
Via: SIP/2.0/TCP 10.1.70.110:5060;branch=z9hG4bKec56650110b79^M<br>
From: <</span><a href="mailto:sip%3A2000@10.1.70.110" target="_blank"><span style="font-family:"Courier New"">sip:2000@10.1.70.110</span></a><span style="font-family:"Courier New"">>;tag=790972480^M<br>
To: <</span><a href="mailto:sip%3A2000@10.1.75.44" target="_blank"><span style="font-family:"Courier New"">sip:2000@10.1.75.44</span></a><span style="font-family:"Courier New"">>^M<br>
Call-ID: </span><a href="mailto:4412b800-e7914b99-de968-6e46010a@10.1.70.110" target="_blank"><span style="font-family:"Courier New"">4412b800-e7914b99-de968-6e46010a@10.1.70.110</span></a><span style="font-family:"Courier New"">^M<br>
CSeq: 101 REFER^M<br>
Max-Forwards: 70^M<br>
Contact: <</span><a><span style="font-family:"Courier New"">sip:2000@10.1.70.110:5060;transport=tcp</span></a><span style="font-family:"Courier New"">>^M<br>
User-Agent: Cisco-CUCM11.5^M<br>
Require: norefersub^M<br>
Expires: 0^M<br>
Refer-To: </span><a href="mailto:cid%3A1234567890@10.1.70.110" target="_blank"><span style="font-family:"Courier New"">cid:1234567890@10.1.70.110</span></a><span style="font-family:"Courier New"">^M<br>
Content-Id: <</span><a href="mailto:1234567890@10.1.70.110" target="_blank"><span style="font-family:"Courier New"">1234567890@10.1.70.110</span></a><span style="font-family:"Courier New"">>^M<br>
Content-Type: <span style="color:black;background:#fff2cc">application/x-cisco-remotecc-request+xml^M<br>
Referred-By: <</span></span><a href="mailto:sip%3A2000@10.1.70.110" target="_blank"><span style="font-family:"Courier New"">sip:2000@10.1.70.110</span></a><span style="font-family:"Courier New"">>^M<br>
Content-Length: 340^M<br>
^M<br>
<br>
<x-cisco-remotecc-request><br>
<br>
<<span style="color:black;background:#fff2cc">answercallreq</span>><br>
<dialogid><br>
<callid></span><a href="mailto:42e18b00-e7914b97-de965-6e46010a@10.1.70.110" target="_blank"><span style="font-family:"Courier New"">42e18b00-e7914b97-de965-6e46010a@10.1.70.110</span></a><span style="font-family:"Courier New""></callid><br>
<localtag>2490017~9e5ce725-d89d-4564-a3be-db63e3605d34-42471213</localtag><br>
<remotetag>ec1d8bbaebe266b0246fba9d-5a3ccd67</remotetag><br>
</dialogid><br>
</answercallreq><br>
<br>
</x-cisco-remotecc-request></span><u></u><u></u></p>
</div>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><span style="font-family:"Arial",sans-serif">Or if you're interested, here's what the XML looks like when the user makes an outgoing call with Finesse's dial pad to extension 2500.</span><u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><span style="font-family:"Courier New""><x-cisco-remotecc-request><br>
<br>
<initiatecallreq><br>
<dialstring><span style="color:black;background:#fff2cc">2500</span></dialstring><br>
<linenumber>1</linenumber><br>
<globalcallid>1-812082</globalcallid><br>
</initiatecallreq><br>
<br>
</x-cisco-remotecc-request></span><u></u><u></u></p>
</div>
</div>
<p class="MsoNormal"> <u></u><u></u></p>
<div>
<div>
<p class="MsoNormal">On Mon, Mar 23, 2020 at 4:23 PM NateCCIE <<a href="mailto:nateccie@gmail.com" target="_blank">nateccie@gmail.com</a>> wrote:<u></u><u></u></p>
</div>
<blockquote style="border:none;border-left:solid #cccccc 1.0pt;padding:0in 0in 0in 6.0pt;margin-left:4.8pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt">
<div>
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">I could be confused but I don’t think the phones talk CTI or CTI-QBE, they just talk SIP/SCCP. UCCX talks CTI to
CUCM’s CTI manager which then tells the phone to do something. I know CTI isn’t supported over MRA, but that is for deskphone control from Jabber, not the jabber softclient.</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif"> </span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">I have people using CCE via thin client talking to a MRA registered jabber. Now that I think of it, they said you
can’t use Jabber for mobile because as an agent device, but I would think that is some other limitation.</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif"> </span><u></u><u></u></p>
<div>
<div style="border:none;border-top:solid #e1e1e1 1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif"> cisco-voip <</span><a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">cisco-voip-bounces@puck.nether.net</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">>
<b>On Behalf Of </b>Wakelin, Frank<br>
<b>Sent:</b> Monday, March 23, 2020 2:49 PM<br>
<b>To:</b> 'Aman Chugh' <</span><a href="mailto:aman.chugh@gmail.com" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">aman.chugh@gmail.com</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">><br>
<b>Cc:</b> voyp list, cisco-voip (</span><a href="mailto:cisco-voip@puck.nether.net" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">cisco-voip@puck.nether.net</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">)
<</span><a href="mailto:cisco-voip@puck.nether.net" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">cisco-voip@puck.nether.net</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">><br>
<b>Subject:</b> Re: [cisco-voip] CCX phone agent over MRA?</span><u></u><u></u></p>
</div>
</div>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">I’m not really sure – I have my doubts as well. They sited the lack of CTI-QBE support as to why the
CCX servers could not use CTI to control the phones connected over MRA. The more folks that tell me they had it working with CCX, the more I think they just latched on to the phrase in the feature configuration guide and went with that. It certainly wouldn’t
be the first time TAC has given me a pat answer and been unwilling to escalate/troubleshoot with me.
</span><span style="font-size:11.0pt;font-family:Wingdings;color:#1f497d">L</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">---</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Frank Wakelin – Senior Network Analyst</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Information Technology | City of Richmond
</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Office +16042764190</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Mobile +17788394693</span><u></u><u></u></p>
<p class="MsoNormal"><a href="mailto:fwakelin@richmond.ca" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#0563c1">fwakelin@richmond.ca</span></a><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif"> Aman Chugh <</span><a href="mailto:aman.chugh@gmail.com" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">aman.chugh@gmail.com</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">>
<br>
<b>Sent:</b> March 23, 2020 1:43 PM<br>
<b>To:</b> Wakelin, Frank <</span><a href="mailto:FWakelin@richmond.ca" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">FWakelin@richmond.ca</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">><br>
<b>Cc:</b> voyp list, cisco-voip (</span><a href="mailto:cisco-voip@puck.nether.net" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">cisco-voip@puck.nether.net</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">)
<</span><a href="mailto:cisco-voip@puck.nether.net" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">cisco-voip@puck.nether.net</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">><br>
<b>Subject:</b> Re: [cisco-voip] CCX phone agent over MRA?</span><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<div>
<p class="MsoNormal">Just curious as to what makes it unsupported with 11.5 or what is added in 12 which makes it supported.<u></u><u></u></p>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">Does SIP phone doing MRA require support for certain sip headers which are only supported with CSR 12 or later.<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">I did have it working with CUCM 10.5 , UCCE 11.6 and Expressway 8.11.2<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
</div>
<p class="MsoNormal"> <u></u><u></u></p>
<div>
<div>
<p class="MsoNormal">On Mon, Mar 23, 2020 at 4:32 PM Wakelin, Frank <<a href="mailto:FWakelin@richmond.ca" target="_blank">FWakelin@richmond.ca</a>> wrote:<u></u><u></u></p>
</div>
<blockquote style="border:none;border-left:solid #cccccc 1.0pt;padding:0in 0in 0in 6.0pt;margin-left:4.8pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt">
<div>
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Thanks all – I did get confirmation from TAC that this is not supported – at least not with 11.5.
Not sure I’m ready to upgrade everything to 12.x at the moment to test but will eat-mark it for later this year.</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">---</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Frank Wakelin – Senior Network Analyst</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Information Technology | City of Richmond
</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Office +16042764190</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Mobile +17788394693</span><u></u><u></u></p>
<p class="MsoNormal"><a href="mailto:fwakelin@richmond.ca" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#0563c1">fwakelin@richmond.ca</span></a><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif"> Anthony Holloway <</span><a href="mailto:avholloway%2Bcisco-voip@gmail.com" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">avholloway+cisco-voip@gmail.com</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">>
<br>
<b>Sent:</b> March 23, 2020 11:05 AM<br>
<b>To:</b> James B <</span><a href="mailto:james.buchanan2@gmail.com" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">james.buchanan2@gmail.com</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">><br>
<b>Cc:</b> Wakelin, Frank <</span><a href="mailto:FWakelin@richmond.ca" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">FWakelin@richmond.ca</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">>; voyp list,
cisco-voip (</span><a href="mailto:cisco-voip@puck.nether.net" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">cisco-voip@puck.nether.net</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">) <</span><a href="mailto:cisco-voip@puck.nether.net" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">cisco-voip@puck.nether.net</span></a><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">><br>
<b>Subject:</b> Re: Re: [cisco-voip] CCX phone agent over MRA?</span><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<div>
<p class="MsoNormal">No, I wouldn't think it has anything to do with finesse. Again the user had direct access to Finesse, no VPN or Internet exposure, just simply the user was on the network with
the PC while the phone was on a public internet circuit. I'd guess it has worked in previous versions, as it's been in the UCCX SRND for a while now, but perhaps there's some issues with it. I just wanted to add a story of success to this otherwise long
thread of failures.<u></u><u></u></p>
</div>
<p class="MsoNormal"> <u></u><u></u></p>
<div>
<div>
<p class="MsoNormal">On Mon, Mar 23, 2020 at 12:46 PM James B <<a href="mailto:james.buchanan2@gmail.com" target="_blank">james.buchanan2@gmail.com</a>> wrote:<u></u><u></u></p>
</div>
<blockquote style="border:none;border-left:solid #cccccc 1.0pt;padding:0in 0in 0in 6.0pt;margin-left:4.8pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt">
<div>
<div>
<p class="MsoNormal"><span lang="EN-GB">Hi Anthony,</span><u></u><u></u></p>
<p class="MsoNormal"><span lang="EN-GB"> </span><u></u><u></u></p>
<p class="MsoNormal"><span lang="EN-GB">Do you attribute that to the change in web connectivity for Finesse with 12.x?</span><u></u><u></u></p>
<p class="MsoNormal"><span lang="EN-GB"> </span><u></u><u></u></p>
<p class="MsoNormal"><span lang="EN-GB">James</span><u></u><u></u></p>
<p class="MsoNormal"><span lang="EN-GB"> </span><u></u><u></u></p>
<p class="MsoNormal"><span lang="EN-GB"> </span><u></u><u></u></p>
<p class="MsoNormal"><span lang="EN-GB"> </span><u></u><u></u></p>
<div style="border:none;border-top:solid #e1e1e1 1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b><span lang="EN-GB">From:
</span></b><a href="mailto:avholloway+cisco-voip@gmail.com" target="_blank"><span lang="EN-GB">Anthony Holloway</span></a><span lang="EN-GB"><br>
<b>Sent: </b>23 March 2020 17:44<br>
<b>To: </b></span><a href="mailto:FWakelin@richmond.ca" target="_blank"><span lang="EN-GB">Wakelin, Frank</span></a><span lang="EN-GB"><br>
<b>Cc: </b></span><a href="mailto:cisco-voip@puck.nether.net" target="_blank"><span lang="EN-GB">voyp list, cisco-voip (cisco-voip@puck.nether.net)</span></a><span lang="EN-GB"><br>
<b>Subject: </b>Re: [cisco-voip] CCX phone agent over MRA?</span><u></u><u></u></p>
</div>
<p class="MsoNormal"><span lang="EN-GB"> </span><u></u><u></u></p>
<div>
<p class="MsoNormal"><span lang="EN-GB">For whatever it's worth, I just upgraded a customer from CSR 11 to CSR 12.5 (including UCCX), and testing of an Agent phone registered over MRA with the Finesse
client directly accessing Finesse server worked. Clicking call control buttons in Finesse was successful in controlling the phone. So, while the documentation and field experiences maybe fuzzy, here's one empirical case of evidence that it does work on the
latest versions.</span><u></u><u></u></p>
<div>
<p class="MsoNormal"><span lang="EN-GB"> </span><u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-GB">Frank, what did TAC respond to you with?</span><u></u><u></u></p>
</div>
</div>
<p class="MsoNormal"><span lang="EN-GB"> </span><u></u><u></u></p>
<div>
<div>
<p class="MsoNormal"><span lang="EN-GB">On Wed, Mar 18, 2020 at 1:07 PM Wakelin, Frank <</span><a href="mailto:FWakelin@richmond.ca" target="_blank"><span lang="EN-GB">FWakelin@richmond.ca</span></a><span lang="EN-GB">>
wrote:</span><u></u><u></u></p>
</div>
<blockquote style="border:none;border-left:solid #cccccc 1.0pt;padding:0in 0in 0in 6.0pt;margin-left:4.8pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt">
<div>
<div>
<p class="MsoNormal"><span style="color:#1f497d">Thanks for the reply. Finesse is using VPN, but the physical desk phone is not – it is connected via MRA. Standard inbound/outbound calling to the
phone itself works flawlessly over MRA. What isn’t working are CCX calls to the agent phone; CCX uses CTI to control/monitor the desk phone.</span><u></u><u></u></p>
<p class="MsoNormal"><span style="color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><span style="color:#1f497d">I did read the CCX/expressway design guide which generally states that CCX over MRA is supported, but features that rely on CTI-QBE are not. The documentation
isn’t clear as to what CCX features rely on that. It does say CCX is supported however and in my mind the base feature required in order to say that “CCX is supported” would be routing calls to agents. I’ve asked TAC to confirm what CCX features/functions
are available/supported and which are not?</span><u></u><u></u></p>
<p class="MsoNormal"><span style="color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><span style="color:#1f497d">This is not critical as we do have the ability to use Jabber softphones via VPN, but we do wish to use 8800 series phones connected via MRA if possible.</span><u></u><u></u></p>
<p class="MsoNormal"><span style="color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><span style="color:#1f497d">---</span><u></u><u></u></p>
<p class="MsoNormal"><span style="color:#1f497d">Frank Wakelin – Senior Network Analyst</span><u></u><u></u></p>
<p class="MsoNormal"><span style="color:#1f497d">Information Technology | City of Richmond
</span><u></u><u></u></p>
<p class="MsoNormal"><span style="color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><span style="color:#1f497d">Office +16042764190</span><u></u><u></u></p>
<p class="MsoNormal"><span style="color:#1f497d">Mobile +17788394693</span><u></u><u></u></p>
<p class="MsoNormal"><a href="mailto:fwakelin@richmond.ca" target="_blank"><span style="color:#0563c1">fwakelin@richmond.ca</span></a><u></u><u></u></p>
<p class="MsoNormal"><span style="color:#1f497d"> </span><u></u><u></u></p>
<p class="MsoNormal"><b>From:</b> Aman Chugh <<a href="mailto:aman.chugh@gmail.com" target="_blank">aman.chugh@gmail.com</a>>
<br>
<b>Sent:</b> March 17, 2020 7:45 PM<br>
<b>To:</b> Wakelin, Frank <<a href="mailto:FWakelin@richmond.ca" target="_blank">FWakelin@richmond.ca</a>><br>
<b>Cc:</b> Erick Bergquist <<a href="mailto:erickbee@gmail.com" target="_blank">erickbee@gmail.com</a>>; Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>>; voyp list, cisco-voip (<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>)
<<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>><br>
<b>Subject:</b> Re: [cisco-voip] CCX phone agent over MRA?<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<div>
<div>
<p class="MsoNormal">It should work if CTI from Finesse is using VPN.<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">Are you able to make inbound and outbound call to the MRA phone without Finesse.<u></u><u></u></p>
</div>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">For the inbound call Cucm sends an invite over to Expressway C with which the mra phone is registered. I would pull CUCM and CTI trace for the inbound call.<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">Aman<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"> <u></u><u></u></p>
<div>
<div>
<p class="MsoNormal">On Tue, Mar 17, 2020 at 3:04 PM Wakelin, Frank <<a href="mailto:FWakelin@richmond.ca" target="_blank">FWakelin@richmond.ca</a>> wrote:<u></u><u></u></p>
</div>
<blockquote style="border:none;border-left:solid #cccccc 1.0pt;padding:0in 0in 0in 6.0pt;margin-left:4.8pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt">
<p class="MsoNormal">Did anyone get this to work? I'm currently testing with a remote 88xx phone registered via MRA. Finesse is logged in on PC connected over VPN. Finesse desktop works fine, but
once agent goes ready, the call is never presented to the phone; the agent immediately goes from reserved to not ready again.<br>
<br>
I use Jabber as a softphone on the laptop the call is presented no problem. Any ideas?<br>
<br>
---<br>
Frank Wakelin - Senior Network Analyst<br>
Information Technology | City of Richmond <br>
<br>
Office +16042764190<br>
Mobile +17788394693<br>
<a href="mailto:fwakelin@richmond.ca" target="_blank">fwakelin@richmond.ca</a><br>
<br>
-----Original Message-----<br>
From: cisco-voip <<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>> On Behalf Of Erick Bergquist<br>
Sent: January 30, 2020 10:44 AM<br>
To: Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>><br>
Cc: voyp list, cisco-voip (<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>) <<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>><br>
Subject: Re: [cisco-voip] CCX phone agent over MRA?<br>
<br>
Has anyone done a Agent with a hard phone over MRA (8865)? Finding<br>
the documents don't really come out and say if it is supported or not.<br>
See the notes about expressway versions and that is about it.<br>
<br>
How about extension mobility login on MRA hard phone for agent use?<br>
<br>
Erick<br>
<br>
On Thu, Jan 23, 2020 at 1:38 PM Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>> wrote:<br>
><br>
> p.s. I just caught that bug description and your comment. Omg.<br>
><br>
><br>
><br>
> From: Anthony Holloway <<a href="mailto:avholloway%2Bcisco-voip@gmail.com" target="_blank">avholloway+cisco-voip@gmail.com</a>><br>
> Sent: Thursday, January 23, 2020 3:30 PM<br>
> To: Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>><br>
> Cc: voyp list, cisco-voip (<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>) <<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>><br>
> Subject: Re: [cisco-voip] CCX phone agent over MRA?<br>
><br>
><br>
><br>
> Are you talking Finesse IP Phone Agent (FIPPA)?<br>
><br>
><br>
><br>
> If so, the below enhancement defect requesting that these types of details be documented (I mean should we even have to request that?) states that they tested FIPPA via MRA and it worked.<br>
><br>
><br>
><br>
> <a href="https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvi51697" target="_blank">
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvi51697</a><br>
><br>
><br>
><br>
> Just know that you'll have to add your UCCX server addresses to the HTTP Allow list on Expressway-C.<br>
><br>
><br>
><br>
> And this makes sense to me, since FIPPA is stateless and all needed information is included in the URL to perform the actions like Login, Logout, Reason Codes, Ready, Not Ready, etc. The actual ringing of the phone and answering etc., are just phone functions,
which we know works over MRA. That's kind of the point. ;)<br>
><br>
><br>
><br>
> What I am not sure of is whether the FIPPA push to phone works, if you're even using that; wherein, upon a new call, UCCX attempts to push content to the Agent's phone using the Phone API, but I would think, though I cannot confirm, that this would fail,
since the phone IP is actually like 192.168.1.1 or something, and UCCX wont know to contact Expressway-C about it, nor would Expressway-C forward the API call on to the phone, etc.<br>
><br>
><br>
><br>
> Finesse itself, the web app on port 8445, would not be available over MRA, as the document states, and would require a VPN or other networking solution to be available to the Agent. Brian Meade commented on a previous conversation to a similar topic that
a reverse proxy would help in this scenario.<br>
><br>
><br>
><br>
> On Thu, Jan 23, 2020 at 2:07 PM Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>> wrote:<br>
><br>
><br>
> Can anyone say whether or not a CCX phone agent (or finesse agent in the future) is supported over MRA?<br>
><br>
> The MRA guides say:<br>
><br>
> The Expressway does not support some Cisco Unified Contact Center Express (Unified CCX) features for contact center agents or other users who connect over MRA. Jabber for Mac and Jabber for Windows cannot provide deskphone control over MRA, because the Expressway
pair does not traverse the CTI-QBE protocol. However, if these Jabber applications, or other CTI applications, can connect to Unified CM CTIManager (directly or through the VPN) they can provide deskphone control of MRA-connected clients.<br>
><br>
> We're looking at a simple phone agent setup, no desktop agent/control, etc.<br>
><br>
> Thoughts?<br>
> _______________________________________________<br>
> cisco-voip mailing list<br>
> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
><br>
> _______________________________________________<br>
> cisco-voip mailing list<br>
> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><u></u><u></u></p>
</blockquote>
</div>
</div>
</div>
</div>
</blockquote>
</div>
<p class="MsoNormal" style="margin-left:4.8pt">
<span lang="EN-GB">_______________________________________________<br>
cisco-voip mailing list<br>
</span><a href="mailto:cisco-voip@puck.nether.net" target="_blank"><span lang="EN-GB">cisco-voip@puck.nether.net</span></a><span lang="EN-GB"><br>
</span><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank"><span lang="EN-GB">https://puck.nether.net/mailman/listinfo/cisco-voip</span></a><u></u><u></u></p>
<p class="MsoNormal"><span lang="EN-GB"> </span><u></u><u></u></p>
</div>
</div>
</blockquote>
</div>
</div>
</div>
<p class="MsoNormal">_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><u></u><u></u></p>
</blockquote>
</div>
</div>
</div>
<p class="MsoNormal">_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><u></u><u></u></p>
</blockquote>
</div>
</div>
</blockquote>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<div>
<p class="MsoNormal">_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><u></u><u></u></p>
</div>
</blockquote>
</div>
</div>
</div>
</blockquote>
</div>
</div>
</div>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" rel="noreferrer" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote></div></div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><br>--<br>Hunter Fuller<br>Router Jockey<br>VBH Annex B-5<br>+1 256 824 5331<br><br>Office of Information Technology<br>The University of Alabama in Huntsville<br>Network Engineering</div></div></div>