<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=Windows-1252">
<style type="text/css" style="display:none;"> P {margin-top:0;margin-bottom:0;} </style>
</head>
<body dir="ltr">
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(23, 78, 134);">
Hi Jason,</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(23, 78, 134);">
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(23, 78, 134);">
If you go through the below cisco live slides it has simple examples to configure the dial peers for your requirement.</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(23, 78, 134);">
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(23, 78, 134);">
<a href="https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKCOL-2125.pdf" id="LPlnk516201">https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKCOL-2125.pdf</a><br>
</div>
<div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(23, 78, 134);">
<br>
</div>
<div id="Signature">
<div style="font-size: 12pt;">
<p style="color: rgb(32, 31, 30); font-family: Calibri, sans-serif; text-align: start; background-color: rgb(255, 255, 255); font-size: 11pt; margin: 0px;">
<span style="margin:0px; color:rgb(47,84,150)">Thanks!</span></p>
<p style="color: rgb(32, 31, 30); font-family: Calibri, sans-serif; text-align: start; background-color: rgb(255, 255, 255); font-size: 11pt; margin: 0px;">
<span style="margin:0px; color:rgb(47,84,150)">Jinto</span></p>
</div>
</div>
</div>
<div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" color="#000000" style="font-size:11pt"><b>From:</b> cisco-voip <cisco-voip-bounces@puck.nether.net> on behalf of JASON BURWELL via cisco-voip <cisco-voip@puck.nether.net><br>
<b>Sent:</b> Friday, June 12, 2020 3:06 PM<br>
<b>To:</b> cisco-voip@puck.nether.net <cisco-voip@puck.nether.net><br>
<b>Subject:</b> [cisco-voip] CUBE Config Dial Peers</font>
<div> </div>
</div>
<div lang="EN-US">
<p></p>
<div style="background-color:#FFEB9C; width:100%; border-style:solid; border-color:#9C6500; border-width:1pt; padding:2pt; font-size:10pt; line-height:12pt; font-family:'Calibri'; color:Black; text-align:left">
<span style="font-weight:bold">CAUTION:</span> This email originated from outside of the University of Guelph. Do not click links or open attachments unless you recognize the sender and know the content is safe. If in doubt, forward suspicious emails to IThelp@uoguelph.ca</div>
<br>
<p></p>
<div class="x_WordSection1">
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: Calibri, sans-serif;">
Does anyone have a good, straightforward reference doc to configuring CUBE dial peers? I have what I would have thought should be a fairly basic config but I’m having trouble getting everything to work properly. I’ve had some assistance but it seems like a
whole lot of configuration to do what little I really need to do. Basically, I just need to send whatever comes from CUCM- either 10, 11 or 3 digits in the SIP invite for outbound and for inbound calls the provider sends me 10 digits in the invite, I just
need to strip off the first 6 and send the last 4 to CUCM to route. I have a lot of adding and stripping digits going on between CUCM and CUBE to make this work. Just trying to find reference docs to see if any of this can be cleaned up. Thanks</p>
</div>
</div>
</div>
</body>
</html>