<div dir="ltr">my question is do you have backups from a different version? I have found that If I have backups from a different version in the same directory it can cause the same problem.<div><br></div><div>We only keep about a week of backups before we delete. But the backup server is then backed up to our long term storage so I can go back much longer if needed.</div><div><br></div><div>YMMV</div><div><br></div><div>Scott</div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Feb 23, 2021 at 1:00 PM Hunter Fuller via cisco-voip <<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Surely "try again with an empty directory" defeats the purpose if the<br>
goal is to restore a backup, no?<br>
<br>
If the directory has to be empty, it isn't much of a backup - right?<br>
<br>
--<br>
Hunter Fuller (they)<br>
Router Jockey<br>
VBH Annex B-5<br>
+1 256 824 5331<br>
<br>
Office of Information Technology<br>
The University of Alabama in Huntsville<br>
Network Engineering<br>
<br>
On Tue, Feb 23, 2021 at 9:19 AM Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>> wrote:<br>
><br>
><br>
><br>
> I have found, and I didn’t think of this earlier, that sometimes a clean directory works much better. It has to do with the XML files that remain explaining what is supposed to be in there.<br>
><br>
><br>
><br>
> I didn’t notice this as much with the core apps as I did with the express apps, like CUE. IT drove me nuts for weeks.<br>
><br>
><br>
><br>
> So, yes, I too have “try a new, empty directory” on my list of things to try (in my head which I forget all the time).<br>
><br>
><br>
><br>
><br>
><br>
><br>
><br>
> From: cisco-voip <<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>> On Behalf Of Andy Carse<br>
> Sent: Tuesday, February 23, 2021 5:10 AM<br>
> To: Wes Sisk (wsisk) <<a href="mailto:wsisk@cisco.com" target="_blank">wsisk@cisco.com</a>><br>
> Cc: Cisco VoIP List <<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>><br>
> Subject: Re: [cisco-voip] CUCM 12.5 issue with restore<br>
><br>
><br>
><br>
> CAUTION: This email originated from outside of the University of Guelph. Do not click links or open attachments unless you recognize the sender and know the content is safe. If in doubt, forward suspicious emails to <a href="mailto:IThelp@uoguelph.ca" target="_blank">IThelp@uoguelph.ca</a><br>
><br>
><br>
><br>
> So I’m now confused, by changing the backup directory to a new directory on our work system I can now backup and restore.<br>
><br>
> It still doesn’t like to restore from the original location but will backup to it.<br>
><br>
> The permissions are the same for both. The def logs don’t show any issues.<br>
><br>
> So I’ll add it to our list of things to check in the future.<br>
><br>
> Case closed<br>
><br>
><br>
><br>
><br>
><br>
> On Sun, 21 Feb 2021 at 14:21, Andy Carse <<a href="mailto:andy.carse@gmail.com" target="_blank">andy.carse@gmail.com</a>> wrote:<br>
><br>
> So,<br>
><br>
> I configured a new location for the backups to be stored (a subdirectory on the original)<br>
><br>
> did a few backups to it from the cluster no problems as usual.<br>
><br>
> ran the restore wizard it found the recent backups no issues, I even ran a backup just to make sure as its my lab environment.<br>
><br>
> then I copied the contents of the original backup directory into the new location.<br>
><br>
> Ran the restore wizard expecting it to time out, but no it found the relevant files.<br>
><br>
> So I'm a bit stumped.<br>
><br>
><br>
><br>
> Now as this is my Lab its not exactly the same as the work environment (network infrastructure etc) So I will raise a change control Monday so I'll see if I can replicate the issue in Production.<br>
><br>
> Just to be clear the original issue is with running the Restore Wizard and not being able to see the backup just taken.<br>
><br>
> So it's not a cop file mismatch, different versions of the cluster, it's not file permissions.<br>
><br>
> So I suggest that don't take it for granted that if you can backup your cluster that you will be able to restore should you need to, you need to test it periodically.<br>
><br>
> Any how I'll update with the outcome.<br>
><br>
><br>
><br>
> Rgds Andy<br>
><br>
><br>
><br>
><br>
><br>
> On Sat, 20 Feb 2021 at 14:19, Wes Sisk (wsisk) <<a href="mailto:wsisk@cisco.com" target="_blank">wsisk@cisco.com</a>> wrote:<br>
><br>
> Andy, sounds like a good start:<br>
><br>
> <a href="https://community.cisco.com/t5/ip-telephony-and-phones/disaster-recovery-problem/td-p/2767755" rel="noreferrer" target="_blank">https://community.cisco.com/t5/ip-telephony-and-phones/disaster-recovery-problem/td-p/2767755</a><br>
><br>
><br>
><br>
> I see 2 other situations that might be relevant:<br>
><br>
> 1. All the same .cop files not installed<br>
><br>
> 2. Attempting to restore a backup of a different version<br>
><br>
><br>
><br>
><br>
><br>
> -Wes<br>
><br>
><br>
><br>
> On Feb 19, 2021, at 6:46 PM, Andy Carse <<a href="mailto:andy.carse@gmail.com" target="_blank">andy.carse@gmail.com</a>> wrote:<br>
><br>
><br>
><br>
> Wes,<br>
><br>
> I select Restore Wizard then select the backup device<br>
><br>
> click next<br>
><br>
> The Ccx then spins the hour glass for 5 mins then says<br>
><br>
> “Restore request timing out. Either master agent is down or Sftp server is inaccessible or too slow to respond”<br>
><br>
><br>
><br>
> It’s the same location all the other UC apps backup to. Could it be that there are too many files in the directory?<br>
><br>
> Even though they would have different names etc?<br>
><br>
><br>
><br>
> It seems to do a couple of hundred new sessions for some reason looking at the backup server syslog.<br>
><br>
> It’s keeping 14 versions of cucm cluster backups is that too many, although I’ve not seen anything to say so.<br>
><br>
><br>
><br>
> I’m going to change the file path tomorrow and see what happens with that.<br>
><br>
><br>
><br>
> Andy<br>
><br>
><br>
><br>
> On Fri, 19 Feb 2021 at 19:16, Wes Sisk (wsisk) <<a href="mailto:wsisk@cisco.com" target="_blank">wsisk@cisco.com</a>> wrote:<br>
><br>
> What is the exact error? What do DRS logs show?<br>
><br>
><br>
><br>
> I see one report that after re-install dbreplication is not established leading to "Unable to send network request to master agent. This may be due to Master or Local Agent being down”<br>
><br>
><br>
><br>
> Resolved by resetting dbrepliaction for all nodes.<br>
><br>
><br>
><br>
> Thanks,<br>
><br>
> Wes<br>
><br>
><br>
><br>
> On Feb 19, 2021, at 1:51 PM, Andy Carse <<a href="mailto:andy.carse@gmail.com" target="_blank">andy.carse@gmail.com</a>> wrote:<br>
><br>
><br>
><br>
> So I thought that if a CUCM could backup to and sftp server without issue, that it would be able to restore.<br>
><br>
> But that turns out to be wrong.<br>
><br>
><br>
><br>
> The cluster can backup to sftp without issue, but when I try to restore said backup, the restore seems to make a large amount of ssh connections and times out saying the DRS maybe down of the sftp server is tacking too long to respond.<br>
><br>
><br>
><br>
> this is the sftp server syslog output.<br>
><br>
> Feb 19 18:29:49 sukucmbkup systemd[1]: Started Session 226 of user support.<br>
><br>
> Feb 19 18:29:49 sukucmbkup systemd[1]: Started Session 227 of user support.<br>
><br>
> Feb 19 18:29:50 sukucmbkup systemd[1]: Started Session 228 of user support.<br>
><br>
> Feb 19 18:29:51 sukucmbkup systemd[1]: Started Session 229 of user support.<br>
><br>
> Feb 19 18:29:52 sukucmbkup systemd[1]: Started Session 230 of user support.<br>
><br>
> Feb 19 18:29:53 sukucmbkup systemd[1]: Started Session 231 of user support.<br>
><br>
><br>
><br>
> any pointers grateful<br>
><br>
><br>
><br>
> Rgds Andy<br>
><br>
><br>
><br>
> _______________________________________________<br>
> cisco-voip mailing list<br>
> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" rel="noreferrer" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
><br>
><br>
><br>
> --<br>
><br>
> Rgds Andy<br>
><br>
><br>
><br>
> --<br>
><br>
> Rgds Andy<br>
><br>
> _______________________________________________<br>
> cisco-voip mailing list<br>
> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" rel="noreferrer" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" rel="noreferrer" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote></div>