<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body dir="auto">
You can definitely monitor with SNMP: <a href="https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/63607-mib-voip-show.html">https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/63607-mib-voip-show.html</a><br>
<br>
<div dir="ltr">
<div><br>
</div>
</div>
<div dir="ltr"><br>
<blockquote type="cite">On May 24, 2021, at 5:43 PM, James Avalos via cisco-voip <cisco-voip@puck.nether.net> wrote:<br>
<br>
</blockquote>
</div>
<blockquote type="cite">
<div dir="ltr">
<meta name="Generator" content="Microsoft Word 15 (filtered medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
font-size:11.0pt;
font-family:"Calibri",sans-serif;}
span.EmailStyle19
{mso-style-type:personal-reply;
font-family:"Calibri",sans-serif;
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->*** EXTERNAL EMAIL - DO NOT CLICK LINKS
*** <br>
<br>
<div>
<div class="WordSection1">
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">I’m sure there are better ways, but we use dial-peer status as an indication of a problem with a SIP trunk, at the CUBE level.
<o:p></o:p></p>
<p class="MsoNormal">As long as you have specific IP addresses configured in them as the session target, and have your monitoring tools look for a change in the status<o:p></o:p></p>
<p class="MsoNormal">from “Active” to “Busy-out.” However, if you’re going to use session server groups (multiple IP’s referenced in single dial-peer), then this method will not work,<o:p></o:p></p>
<p class="MsoNormal">as the CUBE does not provide the status of the dial-peer when not using specific IP’s. You will of course need to have the SIP options Ping statement entered on your carrier facing dial-peers.<o:p></o:p></p>
<p class="MsoNormal">Make sure your service provider supports SIP options ping. In some regions, some carriers do not.
<o:p></o:p></p>
<p class="MsoNormal">So far this method appears to be sufficient. We also monitor the physical interface of the switches and routers which terminate the circuits. But if you do not have that option, the dial-peer status method may work.<o:p></o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">-J<o:p></o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<div>
<div style="border:none;border-top:solid #E1E1E1 1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b>From:</b> cisco-voip <cisco-voip-bounces@puck.nether.net>
<b>On Behalf Of </b>Riley, Sean<br>
<b>Sent:</b> Monday, May 24, 2021 3:25 PM<br>
<b>To:</b> cisco-voip@puck.nether.net<br>
<b>Subject:</b> [External] [cisco-voip] CUBE Monitoring SIP Provider<o:p></o:p></p>
</div>
</div>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif">We are transitioning from traditional PSTN PRI’s to SIP using CUBE. With the PRI’s I could monitor the logs on the router for when the PRI went down, so it would trigger an
alert to splunk which we could alert off of. I am having a hard time finding something similar in CUBE for when the SIP provider is down or not allowing calls to progress.<o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif"><o:p> </o:p></span></p>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif">Any guidance on what others are doing to monitor their SIP provider service via CUBE would be much appreciated.
<o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif"><o:p> </o:p></span></p>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif">Thanks.<o:p></o:p></span></p>
</div>
</div>
<span>_______________________________________________</span><br>
<span>cisco-voip mailing list</span><br>
<span>cisco-voip@puck.nether.net</span><br>
<span>https://puck.nether.net/mailman/listinfo/cisco-voip</span><br>
</div>
</blockquote>
</body>
</html>