<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body dir="auto">
<div dir="ltr"></div>
<div dir="ltr">All good ideas. Thanks again!!</div>
<div dir="ltr"><br>
<blockquote type="cite">On Jan 27, 2022, at 5:13 PM, James Buchanan <james.buchanan2@gmail.com> wrote:<br>
<br>
</blockquote>
</div>
<blockquote type="cite">
<div dir="ltr">
<div dir="ltr">Hello,
<div><br>
</div>
<div>There is also the option of keeping a few of the switches that were refreshed to use for the ATAs.</div>
<div><br>
</div>
<div>Thanks,</div>
<div><br>
</div>
<div>James</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Thu, Jan 27, 2022 at 10:10 PM Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca">lelio@uoguelph.ca</a>> wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir="auto">
<div><br>
</div>
Something to try is to get a cheap DLINK or Linksys switch and insert it between the new 9300uxm and the ata. It might give you some options to get them working until you can replace them. <br>
<br>
<div dir="ltr">Sent from my iPhone</div>
<div dir="ltr"><br>
<blockquote type="cite">On Jan 27, 2022, at 4:41 PM, Lisa Notarianni <<a href="mailto:lisa.notarianni@scranton.edu" target="_blank">lisa.notarianni@scranton.edu</a>> wrote:<br>
<br>
</blockquote>
</div>
<blockquote type="cite">
<div dir="ltr">
<p></p>
<div style="background-color:rgb(255,235,156);width:100%;border-style:solid;border-color:rgb(156,101,0);border-width:1pt;padding:2pt;font-size:10pt;line-height:12pt;font-family:Calibri;color:black;text-align:left">
<span style="font-weight:bold">CAUTION:</span> This email originated from outside of the University of Guelph. Do not click links or open attachments unless you recognize the sender and know the content is safe. If in doubt, forward suspicious emails to
<a href="mailto:IThelp@uoguelph.ca" target="_blank">IThelp@uoguelph.ca</a></div>
<br>
<p></p>
<div>
<p class="MsoNormal">Thank you all for your quick responses. We will go beg for funding and replace the ATAs. We cannot set speed to 10 since it is not an option according to our network engineer.<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Lisa<u></u><u></u></p>
<div>
<div style="border-right:none;border-bottom:none;border-left:none;border-top:1pt solid rgb(225,225,225);padding:3pt 0in 0in">
<p class="MsoNormal"><b>From:</b> Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>>
<br>
<b>Sent:</b> Thursday, January 27, 2022 4:26 PM<br>
<b>To:</b> Lisa Notarianni <<a href="mailto:lisa.notarianni@scranton.edu" target="_blank">lisa.notarianni@scranton.edu</a>><br>
<b>Cc:</b> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<b>Subject:</b> Re: [cisco-voip] ATA 186 question<u></u><u></u></p>
</div>
</div>
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<p class="MsoNormal">You might want to double check that. From this, 17.3, it shows 10 is a valid option.
<u></u><u></u></p>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<div>
<p class="MsoNormal" style="margin-bottom:12pt"><a href="https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.cisco.com%2Fc%2Fen%2Fus%2Ftd%2Fdocs%2Fswitches%2Flan%2Fcatalyst9300%2Fsoftware%2Frelease%2F17-3%2Fconfiguration_guide%2Fint_hw%2Fb_173_int_and_hw_9300_cg%2Fconfiguring_interface_characteristics.html%23task_uw1_3wc_g1b&data=04%7C01%7Clisa.notarianni%40scranton.edu%7C0ba958685f444c7a7c4608d9e1e22682%7Ca8edc49a41f14c699768a7f6d7c3b8c3%7C0%7C0%7C637789184259613443%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=dPuzKYTZWv7Tg1lnwaK47lqsRx4gG3zPtN%2BBqyGa6Uk%3D&reserved=0" originalsrc="https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/17-3/configuration_guide/int_hw/b_173_int_and_hw_9300_cg/configuring_interface_characteristics.html#task_uw1_3wc_g1b" shash="c65uOHjxJMt7PDuBvT9+fH6HCqfH+168NdYUxXNhkSAybc40PpNzWPxOYplkMEO9NJtEOZ6QeMyFwp5fYKSrNacBdYJ1wgGtgcTX+xi8Bsj4bNbSHfOwnF8hf65VPLNgf6JFEuTydNXrcwVAy28jFn7ie7o5Lf31VRrRTkDwV4Y=" target="_blank">https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/17-3/configuration_guide/int_hw/b_173_int_and_hw_9300_cg/configuring_interface_characteristics.html#task_uw1_3wc_g1b</a><u></u><u></u></p>
<div>
<p class="MsoNormal">Sent from my iPhone<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><br>
<br>
<u></u><u></u></p>
<blockquote style="margin-top:5pt;margin-bottom:5pt">
<p class="MsoNormal" style="margin-bottom:12pt">On Jan 27, 2022, at 3:45 PM, Lisa Notarianni <<a href="mailto:lisa.notarianni@scranton.edu" target="_blank">lisa.notarianni@scranton.edu</a>> wrote:<u></u><u></u></p>
</blockquote>
</div>
<blockquote style="margin-top:5pt;margin-bottom:5pt">
<div>
<p class="MsoNormal"> <u></u><u></u></p>
<div style="border:1pt solid rgb(156,101,0);padding:2pt">
<p class="MsoNormal" style="line-height:12pt;background:rgb(255,235,156)"><b><span style="font-size:10pt;color:black">CAUTION:</span></b><span style="font-size:10pt;color:black"> This email originated from outside of the University of Guelph. Do not click links
or open attachments unless you recognize the sender and know the content is safe. If in doubt, forward suspicious emails to
<a href="mailto:IThelp@uoguelph.ca" target="_blank">IThelp@uoguelph.ca</a><u></u><u></u></span></p>
</div>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">We just began Cisco switch upgrade to 9300s and ran into an unexpected issue.<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">We have many ATA 186s out there (about 100) and did not budget for replacement as we were gratefully approved for the massive overhaul of the switches. This ended up being an unforeseen glitch.<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">We cannot get the ATA 186s to work on this switch with this IOS version:
<span style="font-size:10.5pt;font-family:"Segoe UI",sans-serif;color:rgb(36,36,36);background:white">
1 65 C9300-48UXM 17.03.04 CAT9K_IOSXE INSTALL</span><u></u><u></u></p>
<p class="MsoNormal">However, the 186s are working on this switch with this IOS version:
<span style="font-size:10.5pt;font-family:"Segoe UI",sans-serif;color:rgb(36,36,36);background:white">
1 64 C9300-48P 16.9.5 CAT9K_IOSXE INSTALL</span><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">I know it is not an apples to apples comparison but I was wondering if anyone had a workaround for the newer model/IOS.<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">We believe the problem is that the ATA186s are hard coded at 10Mbps/half duplex. Even if we change the switch port parameter from 0x00000000 to 0x000000ff the ATA will not register. The switch port is also configured at duplex auto but
the slowest we can make the port is 100Mbps.<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">Is this not possible? I am hoping you Cisco geniuses have a solution
<span style="font-family:"Segoe UI Emoji",sans-serif">😊</span><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal"><b><i><span style="font-size:12pt;font-family:"Times New Roman",serif">Lisa Notarianni</span></i></b><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:10pt">University of Scranton</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:10pt">Telecommunications Engineer</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:10pt">Infrastructure Services</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:10pt">800 Linden St.</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:10pt">Scranton PA 18510</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:10pt">570.941.4325</span><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpuck.nether.net%2Fmailman%2Flistinfo%2Fcisco-voip&data=04%7C01%7Clisa.notarianni%40scranton.edu%7C0ba958685f444c7a7c4608d9e1e22682%7Ca8edc49a41f14c699768a7f6d7c3b8c3%7C0%7C0%7C637789184259613443%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=BZgFk8a1GkFONrBugWuNMPLDtFDdNFjAr1GFzwGh45E%3D&reserved=0" originalsrc="https://puck.nether.net/mailman/listinfo/cisco-voip" shash="V4HyroQa0Y6xMyYeh8IwZyeIzpyfRP4udQBxGwSnZL2TaKpeYoX6aP3M9paH4iMVbINYPc2nC5nz4mt3RR7ICjtw2/lJhjFfLF19OUCb3HrXci+TbIZE2f5e+Z0rx75SqMT/x+lExyaVgseayPySvGhWW7VTfrQpsUG9k/N5B0s=" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><u></u><u></u></p>
</div>
</blockquote>
</div>
</div>
</div>
</blockquote>
</div>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpuck.nether.net%2Fmailman%2Flistinfo%2Fcisco-voip&data=04%7C01%7Clisa.notarianni%40scranton.edu%7C0ba958685f444c7a7c4608d9e1e22682%7Ca8edc49a41f14c699768a7f6d7c3b8c3%7C0%7C0%7C637789184259613443%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=BZgFk8a1GkFONrBugWuNMPLDtFDdNFjAr1GFzwGh45E%3D&reserved=0" originalsrc="https://puck.nether.net/mailman/listinfo/cisco-voip" shash="V4HyroQa0Y6xMyYeh8IwZyeIzpyfRP4udQBxGwSnZL2TaKpeYoX6aP3M9paH4iMVbINYPc2nC5nz4mt3RR7ICjtw2/lJhjFfLF19OUCb3HrXci+TbIZE2f5e+Z0rx75SqMT/x+lExyaVgseayPySvGhWW7VTfrQpsUG9k/N5B0s=" rel="noreferrer" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote>
</div>
</div>
</blockquote>
</body>
</html>