[e-nsp] Aspen-8810 wont respond to ping / cant ping over 10G link with ipforwarding enabled.

[Daniel Husand]

Im trying to setup a l3 10G link between my Aspen-8810 and my BD10K.
And im having trouble getting the link to work when I have
ipforwarding enabled.

Can anyone shed some light on why this wont work?

>From what I can see    Ports:   1.       (Number of active ports=0)
changes to 1 active ports, when i disable ipforwarding. And that is
likely the culprit, how do I keep it active whilst having ipforwarding
enabled?


ExtremeWare XOS
Copyright (C) 2000-2004 Extreme Networks. All rights reserved.
Protected by US Patent Nos: 6,678,248; 6,104,700; 6,766,482;
6,618,388; 6,034,957.
==============================================================================

Press the <tab> or '?' key at any time for completions.
Remember to save your configuration changes.

* Aspen-8810.1 #
Aspen-8810.1 #
Aspen-8810.1 # show switch

SysName:          Aspen-8810
SysLocation:
SysContact:       support at extremenetworks.com, +1 888 257 3000
System MAC:       00:04:96:1F:A2:10

SysHealth check:  Enabled
Recovery Mode:    All
System Watchdog:  Enabled

Current Time:     Fri Sep 29 22:37:17 2006
Timezone:         [Auto DST Disabled] GMT Offset: 0 minutes, name is UTC.
Boot Time:        Fri Sep 29 22:35:48 2006
Next Reboot:      None scheduled


MSM:              MSM-A *                      MSM-B
                  ------------------------     ------------------------
Current State:    MASTER

Image Selected:   primary
Image Booted:     primary
Primary ver:      11.1.3.3
Secondary ver:    11.4.1.4

Config Selected:  primary.cfg
Config Booted:    primary.cfg

primary.cfg       Created by ExtremeWare XOS version 11.1.3.3
                  115146 bytes saved on Fri Sep 29 22:29:41 2006
Aspen-8810.2 # show vlan v901
VLAN Interface with name v901 created by user
        Tagging:Untagged (Internal tag 4094)
        Priority:       802.1P Priority 0
        Virtual router: VR-Default
        Primary IP    : 81.162.255.2/30
        STPD:           None
        Protocol:       Match all unfiltered protocols
        Loopback:       Disable
        NetLogin:       Disabled
        Rate Shape:     Disabled
        QosProfile:     None configured
        Ports:   1.       (Number of active ports=0)
           Untag:     2:1
        Flags:    (*) Active, (!) Disabled, (g) Load Sharing port
                  (b) Port blocked on the vlan, (a) Authenticated NetLogin port
                  (u) Unauthenticated NetLogin port
Aspen-8810.3 #  ping 81.162.255.1
Ping(ICMP) 81.162.255.1: 4 packets, 8 data bytes, interval 1 second(s).

--- 81.162.255.1 ping statistics ---
4 packets transmitted, 0 received, 100% loss
round-trip min/avg/max = 0/0/0 ms
Aspen-8810.4 #
Aspen-8810.4 # disable ipforwarding
* Aspen-8810.5 #  ping 81.162.255.1
Ping(ICMP) 81.162.255.1: 4 packets, 8 data bytes, interval 1 second(s).
16 bytes from 81.162.255.1: icmp_seq=0 ttl=255 time=32 ms
16 bytes from 81.162.255.1: icmp_seq=1 ttl=255 time=13 ms
16 bytes from 81.162.255.1: icmp_seq=2 ttl=255 time=21 ms
16 bytes from 81.162.255.1: icmp_seq=3 ttl=255 time=4.998 ms

--- 81.162.255.1 ping statistics ---
4 packets transmitted, 4 received, 0% loss
round-trip min/avg/max = 4/18/32 ms
* Aspen-8810.6 #
* Aspen-8810.6 # show vlan v901
VLAN Interface with name v901 created by user
        Tagging:Untagged (Internal tag 4094)
        Priority:       802.1P Priority 0
        Virtual router: VR-Default
        Primary IP    : 81.162.255.2/30
        STPD:           None
        Protocol:       Match all unfiltered protocols
        Loopback:       Disable
        NetLogin:       Disabled
        Rate Shape:     Disabled
        QosProfile:     None configured
        Ports:   1.       (Number of active ports=1)
           Untag:    *2:1
        Flags:    (*) Active, (!) Disabled, (g) Load Sharing port
                  (b) Port blocked on the vlan, (a) Authenticated NetLogin port
                  (u) Unauthenticated NetLogin port
* Aspen-8810.7 #
* Aspen-8810.7 #

-- 
Daniel Husand