[e-nsp] old Summit48 and 1000BaseT GBIC

Jo Rhett jrhett at svcolo.com
Tue Feb 20 23:25:51 EST 2007


I dunno about summits but Cisco 1000T gbics work fine on BD6808 chassis.

On Feb 9, 2007, at 1:19 PM, infothec wrote:
> on a S48 the T-GBIC can not work. these kind of GBIC were not known as
> the SW development was finished.
>
> On i-hardware this reset can happen, depends on the code. All i- 
> hardware
> should support the latest code 7.7. these code suport T-GBICs, but no
> guaranty for Ciscos. truy Finisar.
>
>
>
> Michael Killermann schrieb:
>> I have also no success in getting an Cisco 1000-BT-Converter  
>> running in an Extreme Switch.
>> I tried an Summit 7i, Alpine and Summit 4 and the only thing that  
>> i get is a resetting switch (Summit 7i) but no running gbic.
>>
>>
>> Michael
>>
>>
>>
>>> -----Original Message-----
>>> From: extreme-nsp-bounces at puck.nether.net
>>> [mailto:extreme-nsp-bounces at puck.nether.net] On Behalf Of
>>> Roger Wiklund
>>> Sent: Friday, February 02, 2007 5:31 PM
>>> To: Marcin Kuczera
>>> Cc: extreme-nsp at puck.nether.net
>>> Subject: Re: [e-nsp] old Summit48 and 1000BaseT GBIC
>>>
>>>
>>> Are you sure Extreme supports 1000baseT GBICs?
>>>
>>> I can´t find any 1000baseT GBICs on extremenetworks.com
>>>
>>> Well if it does, it could be a 3d party problem. I´ve had
>>> some issues with
>>> 3d party GBICs on my Cisco 3750.
>>>
>>> Possible workaround is to use SX/LX-GBIC and connect that to a
>>> mediaconverter, fiber->copper. But that´s not really cost
>>> efficient, plus
>>> it´s another possible source of error.
>>>
>>> On Fri, 2 Feb 2007, Marcin Kuczera wrote:
>>>
>>>
>>>> hello,
>>>>
>>>> I have a problem with summit48 switch (old one) and 1000BaseT gbic
>>>> model
>>>> (WS-G5483-NW)
>>>> I'is not original cisco gbic, but comming from the same factory.
>>>>
>>>> The problem is that this switch doesn't see the gbic at all, like
>>>> there is nothing inside the slot.
>>>>
>>>> Is it a common problem for this switch and 1000BaseT Gbics or just
>>>> with my one ? Or maybe you can recommend any working with this old
>>>> model ?
>>>>
>>>> Regards,
>>>> Marcin
>>>>
>>>> _______________________________________________
>>>> extreme-nsp mailing list
>>>> extreme-nsp at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/extreme-nsp
>>>>
>>>>
>>
>> _______________________________________________
>> extreme-nsp mailing list
>> extreme-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/extreme-nsp
>>
>>
>
> _______________________________________________
> extreme-nsp mailing list
> extreme-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/extreme-nsp

-- 
Jo Rhett
senior geek
Silicon Valley Colocation







More information about the extreme-nsp mailing list