[e-nsp] Running EAPS and RSTP simultaneously

[Julien Couturier]

It works.

But keep in mind that the EAPS "flush FDB" message sent by the Master node to the transit nodes will *not* be propagated into STP (AFIK). This may create situations where you cannot achieve the same convergence time that with an EAPS-only based solution.

So, it depends on your requirements...

Cheers,
Julien.


-----Message d'origine-----
De : extreme-nsp-bounces at puck.nether.net [mailto:extreme-nsp-bounces at puck.nether.net] De la part de Samit
Envoyé : mercredi 23 avril 2008 20:22
À : extreme-nsp at puck.nether.net
Objet : [e-nsp] Running EAPS and RSTP simultaneously

Hi,

Is it possible to run EAPS and RSTP simultaneously with Cisco switch 
that can work in topology like this?


    |---------Cisco--------|
    |                         |
    |        Rstp           |
extrem----------------extrem
    |	     Eaps	   |	
    |___extrem______|
    	   |	|
______|    |________
|	              	     |
|         Rstp            |
cisco--------------cisco

Regards,
Samit

	
_______________________________________________
extreme-nsp mailing list
extreme-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp