[e-nsp] Black Diamond 6608

[nsubugr at mtn.co.ug]

Hello,

Please confirm the slot type!

Secondly could you please try for example [sh ports 3:3 information detail] and get the detailed info for the specific port that is failing to do the speeds of 10/100.

Have you tried [conf ports 3:3 auto off speed 100 duplex full / half ] depending on where that devise is connected?

Regards

From: extreme-nsp-bounces at puck.nether.net [mailto:extreme-nsp-bounces at puck.nether.net] On Behalf Of Mike Louis
Sent: Thursday, August 28, 2008 2:09 PM
To: extreme-nsp at puck.nether.net
Subject: [e-nsp] Black Diamond 6608

Hello List,

I have a customer running 7.6.3 code on a black diamond 6608 switch. They are constantly having issues with their 48 Port 10/100/1000 (Not sure model number but i think its 48GTXi or something like that) blade where it fails to autonegotiate speed and duplex settings correctly at 10/100 speeds. It works fine with 1000BaseT cards just normal 10/100 (Broadcom and Intel) have an issue. We are having to set the speed 100-Full and the customer would like to know if upgrading the code the latest rev 7.7 or later will remedy this issue. Is this a hardware or software issue?

Thanks.

Mike Louis

________________________________
Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/extreme-nsp/attachments/20080829/091a5432/attachment-0001.html>