[e-nsp] etherchannel in ExtremeWare ?

[xdsgrrr]

enable sharing 3 grouping 3-10 
and all configurations that is done on port 3 will be valid for this
etherchannel 
On Fri, 2008-10-24 at 16:45 +0300, Ronald Nsubuga wrote:
> Hello,
> 
> 
> Replied in-line.
> 
> On Fri, Oct 24, 2008 at 4:17 PM, Marcin
> Kuczera <marcin at leon.pl> wrote:
>         hello,
>         
>         Well, I don't know all the abbreviation, but - is there a
>         possibility to bind 2 gigabit ports together and make them to
>         be something like etherchannel ?
> 
> 
> 
> 
> 
> 
> Yes it's possible by using LACP / address based or the
> other respective aggregation methods at the other layers.
>  
> 
> 
>         
>         I need to do a mirroring on a vlan, where up+down is more than
>         1G.
>  
> 
> 
> 
> 
> When done with link aggregation you can implement the shared port in
> the mirroring configuration.
>  
> 
> 
>         
>         EW7.6
> 
> 
> 
> 
> Uhm ... haven't tested it off this version BUT would be nice to try
> and find out if you can have the above tried out though am quite
> should it's something you can achieve from the XOS 12.x and above.
> 
> 
> 
> -- 
> Regards,
> 
> Ronald Nsubuga,
> skype: nsptash
> 
> "I don't speak for anybody but myself - that's enough trouble"
> _______________________________________________
> extreme-nsp mailing list
> extreme-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/extreme-nsp