[e-nsp] foregin SFP support

[alain.briant at bt.com]

Hi Marcin


No you don't have to configure something special

You just have to plug it.
I have never done the test on summit X450 but I have done it on Summit 400 or on BD8K and it worked fine with severall kind of SFP.

HTH


-----Message d'origine-----
De : extreme-nsp-bounces at puck.nether.net [mailto:extreme-nsp-bounces at puck.nether.net] De la part de Marcin Kuczera
Envoyé : lundi 27 avril 2009 15:49
À : Daniel Verlouw; extreme-nsp at puck.nether.net
Objet : Re: [e-nsp] foregin SFP support

Daniel Verlouw wrote:
> On Fri, 2009-02-13 at 10:57 +0100, Marcin Kuczera wrote:
>> How is it resolved in Summit 400 or Summit x450e with foregin SFP modules ?
>> Are they accepted ? Or only ExtremeNetworks branded ???
> 
> third-party SFP's work fine on the X450, although officially 
> unsupported of course. Same for XFP's, even when they show 
> 'unsupported' in the CLI 'show port config' command, they do work fine.

well, do you configure the switch somehow to accept unsupported SFPs ?

what I got is:
04/27/2009 22:20:06.27 <Erro:PORT> ERROR: Port 1 : Unknown GBIC. Port will not activate.
04/27/2009 22:20:06.10 <Erro:PORT> ERROR: Port 2 : Unknown GBIC. Port will not activate.


one - finisar LX, the other some CWDM from china.


Regards,
Marcin
_______________________________________________
extreme-nsp mailing list
extreme-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp