[e-nsp] extreme-nsp Digest, Vol 65, Issue 1

[Marcin Kuczera]

Robert Jacobs wrote:
> The correct card for the 400 is for sure the 16111 card.  It is
> different that the 16112 and 16113 cards.  It is also twice as much.
> You must also be running code rev 7.4 or newer for the card to be
> recognized.  The card and Xenpak's are not hot swappable so the 400 must
> be powered off to install the card. ...Hope this helps and answers your
> question

ok,
I was just wondering what happens if 400 is loaded with 16112 or 16113 
card. Because the interface is the same (I suppose so, if 16111 works 
with x450), probably only the software upgrade should make them 
working.. but there is no info about such compatibility...

Regards,
Marcin




>  
>  
> Phonoscope
> Robert Jacobs
> Network / IT Director
> Direct 832-615-7742
> Cell 281-830-2092
> -----Original Message-----
> From: extreme-nsp-bounces at puck.nether.net
> [mailto:extreme-nsp-bounces at puck.nether.net] On Behalf Of
> extreme-nsp-request at puck.nether.net
> Sent: Sunday, November 22, 2009 11:00 AM
> To: extreme-nsp at puck.nether.net
> Subject: extreme-nsp Digest, Vol 65, Issue 1
> 
> Send extreme-nsp mailing list submissions to
> 	extreme-nsp at puck.nether.net
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	https://puck.nether.net/mailman/listinfo/extreme-nsp
> or, via email, send a message with subject or body 'help' to
> 	extreme-nsp-request at puck.nether.net
> 
> You can reach the person managing the list at
> 	extreme-nsp-owner at puck.nether.net
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of extreme-nsp digest..."
> 
> 
> Today's Topics:
> 
>    1. 10G modules for Summit 400-48t (Marcin Kuczera)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Sun, 22 Nov 2009 15:31:26 +0100
> From: Marcin Kuczera <marcin at leon.pl>
> To: extreme-nsp at puck.nether.net
> Subject: [e-nsp] 10G modules for Summit 400-48t
> Message-ID: <4B094B3E.3050108 at leon.pl>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> 
> hello,
> 
> the documentation of Summit 400-48t sais, that the extension module is 
> XGM2-2xn.
> That's exactly the same module as for x450a.
> 
> Ok, but - Summit 400 is out of production, so no new extension modules 
> were added here.
> For x450 there are addidional modules like XGM2-2xf (XFP) and XGM2-2sf 
> (SFP+).
> 
>  From pracical point of view, will they work with Summit 400 ???
> 
> Regards,
> Marcin
> 
> 
> ------------------------------
> 
> _______________________________________________
> extreme-nsp mailing list
> extreme-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/extreme-nsp
> 
> End of extreme-nsp Digest, Vol 65, Issue 1
> ******************************************
>