[e-nsp] get switch ports macs

[Changjie]

Dear all,

I believe Youssef is checking if EXTR switches has unique MAC address for
each and every port.
It seems that EXTR doesn't have that as what Fabian has explained.
It only uses its System MAC.

Cheers,
Changjie

On Sat, Dec 18, 2010 at 11:10 PM, Fabian Extreme <fabian.extr at gmail.com>wrote:

> Hi Youssef,
>
> What you are looping for (system Mac @ per port) was only for internal
> use (for STP port priority for example) on Cisco Catalyst, but the new
> Catalyst don't have anymore theses System port Mac @.
>
> On Extreme switches this never existed because their conception were
> newer. Imagine the MAC @ consumption (a 48 ports switch meant 48 Mac @
> + for every virtual interface)!
>
> What is exactly your need?
>
> Regards, Fabian.
> _______________________________________________
> extreme-nsp mailing list
> extreme-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/extreme-nsp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/extreme-nsp/attachments/20101219/66d12747/attachment.html>