[e-nsp] stpd issue between EW and XOS

[Fabian]

This should not create a loop if STP is enable on 1 swtich, this swith
should detect the loop.

Verify the STP mode of the port (1d, emistp or pvst+) with show stp port
<x>.

Fabian.

-----Original Message-----
From: extreme-nsp-bounces at puck.nether.net
[mailto:extreme-nsp-bounces at puck.nether.net] On Behalf Of Marcin Kuczera
Sent: mardi 23 février 2010 22:33
To: Marcelo Fortes Della Rovere
Cc: extreme-nsp at puck.nether.net
Subject: Re: [e-nsp] stpd issue between EW and XOS

Marcelo Fortes Della Rovere wrote:
> Try this.
> 
> To automatically bind ports to an STPD when the ports are added to a 
> VLAN, use the following
> 
> command:
> 
> enable stpd <stpd_name> auto-bind vlan <vlan_name>
> 
> The autobind feature is disabled on user-created STPDs. The autobind 
> feature is enabled on the default
> 
> VLAN that participates in the default STPD S0.

I did that, thanks.

However, in extreme ware that was automatic..

Regards,
Marcin



> 
>  
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> extreme-nsp mailing list
> extreme-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/extreme-nsp

_______________________________________________
extreme-nsp mailing list
extreme-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp