[e-nsp] legacyCLI on x450

[Fabian]

Hi Marcin,

Check the LegacyCLI Guide on extremenetworks.com but the command is : 

configure cli style legacy

Fabian.

-----Original Message-----
From: extreme-nsp-bounces at puck.nether.net
[mailto:extreme-nsp-bounces at puck.nether.net] On Behalf Of Marcin Kuczera
Sent: dimanche 10 janvier 2010 15:14
To: extreme-nsp at puck.nether.net
Subject: [e-nsp] legacyCLI on x450

hello,

I'am trying to test LegacyCLI module for x450.
However, it seems not to be seen by the system.

Current State:    OPERATIONAL
Image Selected:   primary
Image Booted:     primary
Primary ver:      12.3.3.6
Secondary ver:    12.3.3.6

SummitX450-24x.6 # show ver images
Card  Partition     Installation Date        Version     Name      Branch
----------------------------------------------------------------------------
--
Switch primary   Wed Jan 6 17:06:07 UTC 2010 12.3.3.6 
summitX-12.3.3.6.xos v1233b6
Switch primary   Wed Jan 6 17:36:29 UTC 2010 12.3.3.6 
summitX-12.3.3.6-ssh.xmod v1233b6
Switch primary   Wed Jan 6 20:50:47 UTC 2010 12.3.3.6 
summitX-12.3.3.6-LegacyCLI.xmod v1233b6
Switch secondary Wed Jan 6 17:14:41 UTC 2010 12.3.3.6 
summitX-12.3.3.6.xos v1233b6
Switch secondary Wed Jan 6 17:17:17 UTC 2010 12.3.3.6 
summitX-12.3.3.6-ssh.xmod v1233b6
Switch secondary Wed Jan 6 17:35:30 UTC 2010 12.3.3.6 
summitX-12.3.3.6-LegacyCLI.xmod v1233b6

SummitX450-24x.7 # enable cli ?
   scripting         CLI scripting
   space-completion  Space auto completion
SummitX450-24x.7 # enable cli

there is no command related to legacyCLI..

Is there anything wrong here ? or any specific algorythm to make it 
running ?

Regards,
Marcin
_______________________________________________
extreme-nsp mailing list
extreme-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp