[e-nsp] Summit x450 (not a) and SFP+ 10G module

[Marcin Kuczera]

Fabian wrote:
> Only XGM-2xn/Xenpak is working on X450.
> 
> XGM2 with SFP+ is only for X350, X450e and X450a.

:(
ok, I suppose that x450 has the same chipset on-board as summit400 that 
also has this limitation, only processor is different to run XOS.

So - anyone has XGM-2xn/Xenpak for sale @ good price ? ;-)
On the other side I have x650

Regards,
Marcin



> 
> Fabian.
> -----Original Message-----
> From: extreme-nsp-bounces at puck.nether.net
> [mailto:extreme-nsp-bounces at puck.nether.net] On Behalf Of Marcin Kuczera
> Sent: mardi 29 décembre 2009 22:09
> To: extreme-nsp at puck.nether.net
> Subject: [e-nsp] Summit x450 (not a) and SFP+ 10G module
> 
> hello,
> 
> does any one knows if the Summit x450-24x (not x450a, so the first x450) 
> will work with 2xSFP+ 10G module (or any newer than for XENPAK) ???
> 
> data sheet lists only the one for XENPAK, but.. it is quite not up to date.
> 
> 
> Btw, how do I enable stacking in this switch ?
> there is no enable stacking command.
> 
> XOS 11.4
> 
> Regards,
> Marcin
> _______________________________________________
> extreme-nsp mailing list
> extreme-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/extreme-nsp
> 
> _______________________________________________
> extreme-nsp mailing list
> extreme-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/extreme-nsp
>