[e-nsp] Per Port Rate-limit

[Samit]

try this out:

create meter OneMbps_ingress
configure meter OneMbps_ingress committed-rate 1 Mbps out-action drop
edit policy ingress_match

###

entry one {
	if
		{ match-conditions; }
	then
		{ permit; meter OneMbps_ingress; }
		}
##

match-conditions above is your desired conditions ref to XOS concept
guide page 614.

configure access-list ingress_match port 1 ingress

Samit



On 11/22/10 1:54 PM, Koshy Jacob wrote:
> The egress rate-limiting works fine. But the ingress commands where not
> accepted. Also the count term is not defined? Please suggest.
> The XOS version is 12.2.1 (x450a)
> 
> X450a-24t.9 # create access-list OneMbps " ; " "  permit  ; meter
> OneMpbs_ingress count OneM_out;"
> Error:  Too many arguments from "count"
> X450a-24t.10 # create access-list OneMbps " ; " "  permit  ; meter
> OneMpbs_ingress;"
> Error:  Meter not found
> 
> 
> On 15 November 2010 08:36, Samit <janasamit at wlink.com.np> wrote:
> 
>> Should be possible.
>>
>> this is the command for limiting egress:
>>
>> ###
>> config port 1 rate-limit egress 1000 Kbps
>> ###
>>
>> this is the rule to limit ingress:
>>
>> #####
>> create meter OneMbps_ingress
>> configure meter OneMbps_ingress committed-rate 1000 Kbps out-actions drop
>> create access-list OneMbps " ; " "  permit  ; meter OneMpbs_ingress
>> count OneM_out;"
>> configure access-list add "OneMbps" first ports 1 ingress
>> #####
>>
>> On 11/11/10 11:40 AM, Jake Jake wrote:
>>> Hi,
>>> Is it possible to do per-port ingress & egress rate-limiting/policing on
>>> Extreme Summit X450?
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> extreme-nsp mailing list
>>> extreme-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/extreme-nsp
>> _______________________________________________
>> extreme-nsp mailing list
>> extreme-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/extreme-nsp
>>
>