[e-nsp] storm control ?

[Jarek Kasjaniuk]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

W dniu 10.06.2011 12:18, Marcin Kuczera pisze:
> alain.briant at bt.com wrote:
>>  Hi Marcin
>>
>> You could try rate limit on port:
>>
>> configure ports <port_list> rate-limit flood [broadcast | multicast | unknown-destmac] [no-limit | <pps>]
> 
> Is it working on ingress or egress ?
> 
> Regards,
> Marcin
> 
> 
>>

Limits the amount of ingress flooded traffic; minimizes network impact of broadcast loops.

Syntax Description

port_list Specifies the port number. On a stand-alone switch, this value is just the port number,
         and on a modular switch, this value is the slot and port number.

broadcast Specifies all broadcast packets.

multicast Specifies all flooded multicast packets (known IP multicast caches are still forwarded at
         line rate).

unknown-destmac Specifies all packets with unknown MAC DAs.

no-limit Specifies unlimited rate.

pps Packets per second allowed; range is from 0 to 262,144.


Best regards
- --
Jarek
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.17 (GNU/Linux)
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=qYoC
-----END PGP SIGNATURE-----