[e-nsp] L2 Memory ECC problem ?

[Erik Bais]

Hi Marcin,

You should do a run diag if you want to see if there is a memory issue.

After the run diag, you should be able to see (after the test which will reboot the switch btw,) you will see the result with a show diag.

If the result is all ok, don't worry about it, it might be a post error in the software, that you could ignore.

But the only way to know is to run a diag.
Make sure you create a backup of the config prior to do a run diag. if the test fails, you might need to do a switch swap, and it is best to have backups of the config.
Some diag errors could lockup the console, so it is best to have backup regardless.

Erik Bais

-----Original Message-----
From: extreme-nsp-bounces at puck.nether.net [mailto:extreme-nsp-bounces at puck.nether.net] On Behalf Of Marcin Kuczera
Sent: woensdag 15 februari 2012 16:07
To: extreme-nsp at puck.nether.net
Subject: [e-nsp] L2 Memory ECC problem ?

hello,

I have something like that in log:
02/15/2012 14:42:38.48 <Crit:HAL.Sys.Critical> Slot-1: CPU/L2 Memory ECC Counters have incremented.

it happend right after switch power down/up

Nothing else suppsected... it there anything to warry about ?
switch - Summit X450-24x

Regards,
Marcin
_______________________________________________
extreme-nsp mailing list
extreme-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp