[e-nsp] EAPS shared link - more compliacated

Julien Couturier julien.coutur at gmail.com
Wed Feb 29 11:31:23 EST 2012


Hi Marcin,

EAPS Common link Controller/Partner must be point-to-point with no
intermediate switch. Depending on your requirements, platforms, EXOS
version, you may take a look at G.8032 that may have different limitations
than EAPS in this case.

Julien

Le 26 février 2012 23:08, Marcin Kuczera <marcin at leon.pl> a écrit :

> hello,
>
> What if structure of network consists of 2 rings, but shared link for both
> rings goes over 3 or more switches ?
>
> How in that case should shared port be configured ?
> Could controller and partner be non adjacent nodes ?
>
>
> Regards,
> Marcin
> ______________________________**_________________
> extreme-nsp mailing list
> extreme-nsp at puck.nether.net
> https://puck.nether.net/**mailman/listinfo/extreme-nsp<https://puck.nether.net/mailman/listinfo/extreme-nsp>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/extreme-nsp/attachments/20120229/c0241731/attachment.html>


More information about the extreme-nsp mailing list