[e-nsp] Getting temperature via SNMP

[Volodymyr Litovka]

Alex hi,

whether you're getting correct MIB? We're using this one:

[doka at burka ~]$ snmpwalk -v2c -c xxxxx x.x.x.x 1.3.6.1.4.1.1916.1.1.1.8
SNMPv2-SMI::enterprises.1916.1.1.1.8.0 = INTEGER: 23

# show temperature
Field Replaceable Units               Temp (C)   Status   Min  Normal  Max
--------------------------------------------------------------------------
Switch         : X480-24x               23.50    Normal   -10    0-40  55

# show switch
[ ... ]
Image Booted:     secondary
Secondary ver:    12.5.4.5


On 1/20/2012 9:37 AM, Alexander Shikoff wrote:
> Hello All,
>
> I have a problem with getting temperature via SNMP from X350-48t: the
> returned value stills the same until the console command 'show temperature'
> executed.
>
> Has anyone expirienced the same issue? Any chance to fix it? Thanks.
>

-- 

/doka

Vision without Execution is Hallucination. -- Thomas Edison.