[e-nsp] x650 CPU Load

[Marcin Kuczera]

On 2013-02-26 14:34, Erik Bais wrote:
> Hi Marcin,
>
> Could you show the output from the command 'top'
>
> Also press the number 1, to show any additional CPU cores and their load.
>
> It should show which process is so busy.
Mem: 415392K used, 601052K free, 0K shrd, 70472K buff, 110704K cached
CPU0:  5.2% usr 11.9% sys  0.0% nic 67.5% idle  0.0% io 15.2% irq 0.0% sirq
CPU1:  6.6% usr 28.8% sys  0.0% nic 53.3% idle  0.0% io  0.0% irq 11.2% sirq
Load average: 7.84 8.19 8.10 8/207 4795
   PID  PPID USER     STAT   RSS %MEM CPU %CPU COMMAND
  1305     2 root     SW       0  0.0   1 18.3 [bcmRX]
  1477     1 root     S     7868  0.7   0  4.3 ./fdb
  1255     2 root     SW<      0  0.0   0  2.4 [bcmLINK.1]
  1457     1 root     S <  21964  2.1   0  1.8 ./hal
  1253     2 root     SW<      0  0.0   0  1.4 [bcmLINK.0]
  1517     1 root     S     7028  0.6   1  0.9 ./mcmgr
  3039     2 root     SW<      0  0.0   0  0.9 [bcmCNTR.0]
  3040     2 root     SW<      0  0.0   0  0.9 [bcmCNTR.1]
  1541     1 root     S     2824  0.2   1  0.5 ./pim
  1110     1 root     S     2848  0.2   1  0.3 /exos/bin/epm -t 40 -f 
/exos/config/epmrc.AdvEdge -d /exos/config/epmdprc
  4795  4794 root     R      796  0.0   0  0.3 top -d 3
  1701     2 root     SWN      0  0.0   0  0.3 [bcmL2XAGE.1]
  1292     2 root     DW<      0  0.0   1  0.3 [tocpd_tx]
  1501     1 root     R     4340  0.4   0  0.1 ./eaps
  1487     1 root     S     3708  0.3   0  0.1 ./elsm
  1507     1 root     S     3420  0.3   1  0.1 ./rtmgr update
  1547     1 root     S     3052  0.3   1  0.1 ./acl
  1531     1 root     S     2652  0.2   1  0.1 ./rip
  1536     1 root     S     2332  0.2   0  0.1 ./ripng
  1700     2 root     SW<      0  0.0   1  0.1 [bcmL2X.1]
  1698     2 root     RW<      0  0.0   0  0.1 [bcmL2X.0]
  1256     2 root     SW<      0  0.0   0  0.1 [bcmASYNC]
  1257     2 root     RW<      0  0.0   1  0.1 [bcmRLINK]
  1461     1 root     S    36856  3.6   0  0.0 ./cliMaster
  1582     1 root     S     7100  0.6   1  0.0 ./etmon
  1475     1 root     S     6748  0.6   0  0.0 ./vlan
  1610     1 root     S     5668  0.5   1  0.0 ./idMgr
  1596     1 root     S     5648  0.5   1  0.0 ./xmld
  1463     1 root     S     5084  0.5   0  0.0 ./cfgmgr
  1470     1 root     S     4956  0.4   0  0.0 ./snmpSubagent
  1489     1 root     S     4620  0.4   1  0.0 ./edp
Slot-1 SummitStack-GZE.2 #

Regards,
Marcin


>
> Regards,
> Erik Bais
>
> -----Original Message-----
> From: extreme-nsp-bounces at puck.nether.net [mailto:extreme-nsp-bounces at puck.nether.net] On Behalf Of Marcin Kuczera
> Sent: dinsdag 26 februari 2013 14:31
> To: extreme-nsp at puck.nether.net
> Subject: [e-nsp] x650 CPU Load
>
> hello,
>
> I have 2x X650 connected via classical stack. CPU load between 50 and 60% on slot one looks strange.
> Is this normal ?
>
>         CPU Utilization Statistics - Monitored every 5 seconds
> -------------------------------------------------------------------------------
>
> Card   Process      5    10   30   1    5    30   1    Max Total
>                       secs secs secs min  mins mins hour User/System
>                       util util util util util util util util CPU Usage
>                       (%)  (%)  (%)  (%)   (%)  (%)  (%)  (%) (secs)
> -------------------------------------------------------------------------------
>
> Slot-1 System       52.4 51.6 50.4 50.2 48.9 51.7 51.9 99.9 4.27   35691.25
> Slot-2 System        6.2  7.0  6.8  6.6  6.7  6.1  6.1 36.3 0.00       0.00
>
> ExtremeXOS version 15.1.3.4 v1513b4-patch1-8
>
> Regards,
> Marcin
>
> _______________________________________________
> extreme-nsp mailing list
> extreme-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/extreme-nsp