[e-nsp] stacking

[Marcin Kuczera]

This is quite old switch, old - not supported software... do not expect 
perfect behavior.
But - there might be some other reason - open your switches and check 
capacitors on CPU board.
If they look swollen (1000uF) - replace them.

Regards,
Marcin


On 2014-05-26 15:04, term at northnet.net.nz wrote:
>
> I have two 400-48t stacked ... well were stacked on 7.8e.4.1 patch1-r4 
> [non-ssh]
>
> They seem to give up and f*ck out often .. (re the show stacking) or 
> is it  a code issue or do I just give them to the garbo man and put in 
> a clustered juniper ex 4200's
>
> show stacking
>
> Stacking Data Base
>
> ==================
>
> Common Info
>
> Mode : Dup-No-Ring State   : Up-Master  Stacking  : Enabled
>
> Master Slot: 2           Switches: 1          Local Slot: 2
>
> Config Slot: None
>
> Slot 1: State INIT
>
>         Status : Disabled Master    : No  MAC      : 00:04:96:18:62:EE
>
> Binding   : Inactive Cpu Pri   : 0   Platform : Unknown
>
> Slot-Mac  : Loose    Cfg Pri   : 15  Cfg Slot  : None
>
> Stacking Ports: 0
>
>         Fallback IP 10.100.11.151 NetMask 255.255.255.0
>
> Slot 2: State MASTER
>
>         Status : Enabled  Master    : Yes MAC      : 00:04:96:18:43:0F
>
> Binding   : Active   Cpu Pri   : 0   Platform : S400-48t
>
> Slot-Mac  : Loose    Cfg Pri   : 0   Cfg Slot  : None
>
> Stacking Ports: 1
>
>                 Port-1 *2:52
>
>         Fallback IP 10.100.11.152 NetMask 255.255.255.0
>
>
>
> _______________________________________________
> extreme-nsp mailing list
> extreme-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/extreme-nsp

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/extreme-nsp/attachments/20140528/e64ed00f/attachment.html>