[e-nsp] DDMI counters via SNMP

[Artem Enborisov]

Hi, it's not possible.

However you can use Extreme SDK
<http://tech.extremenetworks.com/solutions/Insite.aspx> to get this
information.
Please note, on some old EXoS releases there was memory depletion issue
when you get transceiver's DDMI info (quite slow but once in a half year
switch might reboot). So, I suggest you to draw memory usage graph and
upgrade switch if you face one.

Good luck =)

2014-10-29 20:07 GMT+05:00 Marcin Kuczera <marcin at leon.pl>:

> hello,
>
> does anyone know how to read DDMI parameters via SNMP ?
>
> Software EXOS 15.3.4.6
>
> Regards,
> Marcin
>
> _______________________________________________
> extreme-nsp mailing list
> extreme-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/extreme-nsp
>



-- 
WBR Enborisov Artem
Systems Engineer
NAG TELECOM
Building 57/2, Predelnaya st,
Ekaterinburg, Russia
tel/fax: +7 (343) 379-98-38 (ext. 321)
e-mail: a.enborisov at nag.ru <dmitry at nag.ru>
skype: aenborisov
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/extreme-nsp/attachments/20141030/8e456bd9/attachment.html>