[e-nsp] BIDI SFP support on Summit48si platform

Marcin Kuczera marcin at leon.pl
Fri Oct 31 06:35:56 EDT 2014


On 2014-10-31 10:18, Martin T wrote:
> Hi,
>
> so you have seen BIDI(Extreme Networks seems to call those 1000BASE
> BX-D/1000BASE BX-U SFP's or 1000BASE-BX in general in their
> documentation) type SFP transceivers in Summit48si platform? According
> to "Extreme Networks Pluggable Interface Modules Installation Guide"
> 1000BASE-BX Bi-Directional SFP Modules are not supported on Summit48si
> platform, but probably the Summit48si platform was already end of life
> at the time this document was published :)

Well, but inside of 100BASE-BX there is space to mark it as BIDI. The 
only reasonable choice is LX.
If BIDI modules will be configured (in EEPROM) as LX modules - they will 
work fine.

I guess they are made for Cisco without any standard information about 
beeing LX in EEPROM,
so the switch doesn't know how to treat the module.
Same happens if you put STM-4 module in a switch, it is marked then as 
STM-4 and no ethernet.
The only multi configuration is possible for multi-rate modules (with 
i.e. max speed 2.6G).
These are set to be 100Base-LX, 1000BaseLX, STM-1, STM-4, STM-16, 
Etherchannel (whatever except 4G) etc...

Marcin


>
>
> thanks,
> Martin
>
> On 10/28/14, Marcin Kuczera <marcin at leon.pl> wrote:
>> On 2014-10-28 13:44, Martin T wrote:
>>> Hi,
>>>
>>> I have an Extreme Networks Summit48si with EW 7.7.2.4("Full L3 +
>>> Security" license). This switch has two SFP slots. If I insert various
>>> BIDI type SFP transceivers to this switch, I always get the
>>> "<Warn:PORT> Unsupported GBIC from vendor OEM",  "<Warn:PORT>
>>> Unsupported GBIC from vendor OPT" or "<Erro:PORT> ERROR: Port 50 :
>>> unknown GBIC. Port will not activate. Replace with Extreme Networks
>>> GBIC."
>>>
>>> Does Summit48si platform support BIDI SFP transceivers? If yes, is one
>>> restricted to use Extreme Networks BIDI SFP transceivers?
>> I'am not sure, but try some recent 7.8 EWare. It should work, but will
>> report unsupported.
>> The problem is in last Error - unknown GBIC is reported when GBIC is
>> programmed i.e. with some Cisco EEPROM content,
>> without setting bit that sais - I'am 1G Ethernet module.
>> You should reprogram your modules, or send them to me ;)
>>
>> Regards,
>> Marcin
>>
>>
>>
>>>
>>> thanks,
>>> Martin
>>> _______________________________________________
>>> extreme-nsp mailing list
>>> extreme-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/extreme-nsp
>>
>> --
>>
>> Marcin Kuczera / Specjalista d/s telekomunikacji, Wiceprezes Zarza;du
>> +48 32 440 80 71/ marcin.kuczera at leon.pl <mailto:marcin.kuczera at leon.pl>
>>
>> Leon Sp. z o.o.
>> ul. Kilin'skiego 33d, 44-200 Rybnik
>> http://www.leon.pl/
>>
>> INTERNET | TELEWIZJA | TELEFON
>>
>> Facebook <https://www.facebook.com/LeonInternet?ref=hl>
>>
>> KRS 0000223101 Sa;d Rejonowy w Gliwicach
>> Kapita? zak?adowy 200.000 z?
>> NIP: 6332068698
>>
>>


-- 

Marcin Kuczera / Specjalista d/s telekomunikacji, Wiceprezes Zarządu
+48 32 440 80 71/ marcin.kuczera at leon.pl <mailto:marcin.kuczera at leon.pl>

Leon Sp. z o.o.
ul. Kilińskiego 33d, 44-200 Rybnik
http://www.leon.pl/

INTERNET | TELEWIZJA | TELEFON

Facebook <https://www.facebook.com/LeonInternet?ref=hl>

KRS 0000223101 Sąd Rejonowy w Gliwicach
Kapitał zakładowy 200.000 zł
NIP: 6332068698

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/extreme-nsp/attachments/20141031/adfae439/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: facebook.png
Type: image/png
Size: 554 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/extreme-nsp/attachments/20141031/adfae439/attachment.png>


More information about the extreme-nsp mailing list